index de0539aa8cfed04104466252d21fea243ea52fd4..f1a8935cc128c6c4bc9ef4bda18c42e159e2b905 100644 (file)
package corefunctions;
use Exporter;
@ISA = qw(Exporter);
-my @events = qw(get_events registered set_activated_for_installation new_ldap_config new_key generate_hw_digest detect_hardware reboot halt reinstall softupdate);
+my @events = (
+ "get_events",
+ "registered",
+ 'new_syslog_config',
+ "new_ntp_config",
+ "new_ldap_config",
+ "new_key",
+ "generate_hw_digest", # no implementations
+ "detect_hardware",
+ "confirm_new_key",
+ "ping",
+ "import_events", # no implementations
+ );
@EXPORT = @events;
use strict;
use warnings;
-use Data::Dumper;
use Fcntl;
use GOSA::GosaSupportDaemon;
use File::Basename;
+my ($ldap_enabled, $offline_enabled, $ldap_config, $pam_config, $nss_config, $fai_logpath, $ldap_config_exit_hook);
-my ($ldap_enabled, $ldap_config, $pam_config, $nss_config, $fai_logpath);
-
+my $chrony_file = "/etc/chrony/chrony.conf";
+my $syslog_file = "/etc/syslog.conf";
my %cfg_defaults = (
- "general" => {
- "fai_logpath" => [\$fai_logpath, "/var/log/fai/fai.log"],
- },
- "client" => {
- "ldap" => [\$ldap_enabled, 1],
- "ldap_config" => [\$ldap_config, "/etc/ldap/ldap.conf"],
- "pam_config" => [\$pam_config, "/etc/pam_ldap.conf"],
- "nss_config" => [\$nss_config, "/etc/libnss_ldap.conf"],
- },
+ "client" => {
+ "ldap" => [\$ldap_enabled, 1],
+ "offline-ldap" => [\$offline_enabled, 0],
+ "ldap-config" => [\$ldap_config, "/etc/ldap/ldap.conf"],
+ "pam-config" => [\$pam_config, "/etc/pam_ldap.conf"],
+ "nss-config" => [\$nss_config, "/etc/libnss-ldap.conf"],
+ "fai-logpath" => [\$fai_logpath, "/var/log/fai/fai.log"],
+ "ldap-config-exit-hook" => [\$ldap_config_exit_hook, undef],
+ },
);
BEGIN {}
my $client_mac_address = $main::client_mac_address;
sub write_to_file {
- my ($string, $file) = @_;
- my $error = 0;
+ my ($string, $file) = @_;
+ my $error = 0;
- if( not defined $file || not -f $file ) {
- &main::daemon_log("ERROR: $0: check '-f file' failed: $file", 1);
- $error++;
- }
- if( not defined $string || 0 == length($string)) {
- &main::daemon_log("ERROR: $0: empty string to write to file '$file'", 1);
- $error++;
- }
-
- if( $error == 0 ) {
-
- chomp($string);
-
- open(FILE, ">> $file");
- print FILE $string."\n";
- close(FILE);
- }
+ if( not defined $file || not -f $file ) {
+ &main::daemon_log("ERROR: $0: check '-f file' failed: $file", 1);
+ $error++;
+ }
+ if( not defined $string || 0 == length($string)) {
+ &main::daemon_log("ERROR: $0: empty string to write to file '$file'", 1);
+ $error++;
+ }
+
+ if( $error == 0 ) {
- return;
+ chomp($string);
+
+ if( not -f $file ) {
+ open (FILE, "$file");
+ close(FILE);
+ }
+ open(FILE, ">> $file") or &main::daemon_log("ERROR in corefunctions.pm: can not open '$file' to write '$string'", 1);;
+ print FILE $string."\n";
+ close(FILE);
+ }
+
+ return;
}
sub get_events {
- return \@events;
+ return \@events;
}
sub daemon_log {
- my ($msg, $level) = @_ ;
- &main::daemon_log($msg, $level);
- return;
+ my ($msg, $level) = @_ ;
+ &main::daemon_log($msg, $level);
+ return;
}
+sub registered {
+ my ($msg, $msg_hash) = @_ ;
-sub reboot {
- my ($msg, $msg_hash) = @_ ;
- &main::daemon_log("got reboot-msg: $msg", 5);
- return;
-}
+ my $header = @{$msg_hash->{'header'}}[0];
+ if( $header eq "registered" ) {
+ my $source = @{$msg_hash->{'source'}}[0];
+ &main::daemon_log("INFO: registration at $source", 1);
+ $main::server_address = $source;
+ }
+ # set globaly variable client_address
+ my $target = @{$msg_hash->{'target'}}[0];
+ $main::client_address = $target;
-sub halt {
- my ($msg, $msg_hash) = @_ ;
+ # set registration_flag to true
+ &main::_setREGISTERED(1);
- &main::daemon_log("got halt-msg: $msg", 5);
- return;
-}
+ # Write the MAC address to file
+ if(stat($main::opts_file)) {
+ unlink($main::opts_file);
+ }
+ my $opts_file_FH;
+ my $hostname= $main::client_dnsname;
+ $hostname =~ s/\..*$//;
+ $hostname =~ tr/A-Z/a-z/;
+ sysopen($opts_file_FH, $main::opts_file, O_RDWR | O_CREAT | O_TRUNC , 0644);
+ print $opts_file_FH "MAC=\"$main::client_mac_address\"\n";
+ print $opts_file_FH "IPADDRESS=\"$main::client_ip\"\n";
+ print $opts_file_FH "HOSTNAME=\"$hostname\"\n";
+ print $opts_file_FH "FQDN=\"$main::client_dnsname\"\n";
+ if(defined(@{$msg_hash->{'ldap_available'}}) &&
+ @{$msg_hash->{'ldap_available'}}[0] eq "true") {
+ print $opts_file_FH "LDAP_AVAILABLE=\"true\"\n";
+ }
+ if(defined(@{$msg_hash->{'error'}})) {
+ my $errormsg= @{$msg_hash->{'error'}}[0];
+ print $opts_file_FH "GOSA_SI_ERROR=\"$errormsg\"\n";
+ &write_to_file($errormsg, $fai_logpath);
+ }
+ close($opts_file_FH);
+
+ return;
+}
-sub reinstall {
- my ($msg, $msg_hash) = @_ ;
- &main::daemon_log("got reinstall-msg: $msg", 5);
+sub server_leaving {
+ my ($msg_hash) = @_ ;
+ my $source = @{$msg_hash->{'source'}}[0];
+ my $header = @{$msg_hash->{'header'}}[0];
+
+ daemon_log("gosa-si-server $source is going down, cause registration procedure", 1);
+ $main::server_address = "none";
+ $main::server_key = "none";
- return;
+ # reinitialization of default values in config file
+ &main::read_configfile;
+
+ # registrated at new daemon
+ &main::register_at_server();
+
+ return;
}
-sub softupdate {
- my ($msg, $msg_hash) = @_ ;
- &main::daemon_log("got softupdate-msg: $msg", 5);
+## @method new_syslog_config
+# Update or add syslog messages forwarding to specified syslog server.
+# @param msg - STRING - xml message with tag server
+# @param msg_hash - HASHREF - message information parsed into a hash
+sub new_syslog_config {
+ my ($msg, $msg_hash) = @_ ;
- return;
-}
+ # Sanity check of incoming message
+ if ((not exists $msg_hash->{'server'}) || (not @{$msg_hash->{'server'}} == 1) ) {
+ &main::daemon_log("ERROR: 'new_syslog_config'-message does not contain a syslog server: $msg", 1);
+ return;
+ }
+ # Fetch the new syslog server from incoming message
+ my $syslog_server = @{$msg_hash->{'server'}}[0];
+ &main::daemon_log("INFO: found syslog server: ".join(", ", $syslog_server), 5);
+ my $found_server_flag = 0;
+
+ # Sanity check of /etc/syslog.conf
+ if (not -f $syslog_file) {
+ &main::daemon_log("ERROR: file '$syslog_file' does not exist, cannot do syslog reconfiguration!", 1);
+ return;
+ }
+
+ # Substitute existing server with new syslog server
+ open (FILE, "<$syslog_file");
+ my @file = <FILE>;
+ close FILE;
+ my $syslog_server_line = "*.*\t@".$syslog_server."\n";
+ foreach my $line (@file) {
+ if ($line =~ /^\*\.\*\s+@/) {
+ $line = $syslog_server_line;
+ $found_server_flag++;
+ }
+ }
+
+ # Append new server if no old server configuration found
+ if (not $found_server_flag) {
+ push(@file, "\n#\n# syslog server configuration written by GOsa-si\n#\n");
+ push(@file, $syslog_server_line);
+ }
+
+ # Write changes to file and close it
+ open (FILE, "+>$syslog_file");
+ print FILE join("", @file);
+ close FILE;
+ &main::daemon_log("INFO: Wrote new configuration file: $syslog_file", 5);
-sub registered {
- my ($msg, $msg_hash) = @_ ;
+ # Restart syslog deamon
+ my $res = qx(/etc/init.d/sysklogd restart);
+ &main::daemon_log("INFO: restart syslog daemon: $res", 5);
- my $header = @{$msg_hash->{'header'}}[0];
- if( $header eq "registered" ) {
- my $source = @{$msg_hash->{'source'}}[0];
- &main::daemon_log("registration at $source",1);
- }
+ return;
+}
- # set globaly variable client_address
- my $target = @{$msg_hash->{'target'}}[0];
- $main::client_address = $target;
- # set registration_flag to true
- my $out_hash = &create_xml_hash("registered", $main::client_address, $main::server_address);
- my $out_msg = &create_xml_string($out_hash);
- return $out_msg;
+## @method new_ntp_config
+# Updates the server options in /etc/chrony/chrony.conf and restarts the chrony service
+# @param msg - STRING - xml message with tag server
+# @param msg_hash - HASHREF - message information parsed into a hash
+sub new_ntp_config {
+ my ($msg, $msg_hash) = @_ ;
-}
+ # Sanity check of incoming message
+ if ((not exists $msg_hash->{'server'}) || (not @{$msg_hash->{'server'}} >= 1) ) {
+ &main::daemon_log("ERROR: 'new_ntp_config'-message does not contain a ntp server: $msg", 1);
+ return;
+ }
+ # Fetch the new ntp server from incoming message
+ my $ntp_servers = $msg_hash->{'server'};
+ &main::daemon_log("INFO: found ntp server: ".join(", ", @$ntp_servers), 5);
+ my $ntp_servers_string = "server\t".join("\nserver\t", @$ntp_servers)."\n";
+ my $found_server_flag = 0;
-sub set_activated_for_installation {
- my ($msg, $msg_hash) = @_ ;
- my $header = @{$msg_hash->{'header'}}[0];
- my $target = @{$msg_hash->{'target'}}[0];
- my $source = @{$msg_hash->{'source'}}[0];
+ # Sanity check of /etc/chrony/chrony.conf
+ if (not -f $chrony_file) {
+ &main::daemon_log("ERROR: file '$chrony_file' does not exist, cannot do ntp reconfiguration!", 1);
+ return;
+ }
- my $Datei = "/tmp/set_activated_for_installation";
- open(DATEI, ">$Datei");
- print DATEI "set_activated_for_installation\n";
- close DATEI;
-
- return;
-}
+ # Substitute existing server with new ntp server
+ open (FILE, "<$chrony_file");
+ my @file = <FILE>;
+ close FILE;
+ my @new_file;
+ foreach my $line (@file) {
+ if ($line =~ /^server\s+/) {
+ if ($found_server_flag) {
+ $line =~ s/^server\s+[\S]+\s+$//;
+ } else {
+ $line =~ s/^server\s+[\S]+\s+$/$ntp_servers_string/;
+ }
+ $found_server_flag++;
+ }
+ push(@new_file, $line);
+ }
+ # Append new server if no old server configuration found
+ if (not $found_server_flag) {
+ push(@new_file, "\n# ntp server configuration written by GOsa-si\n");
+ push(@new_file, $ntp_servers_string);
+ }
-sub server_leaving {
- my ($msg_hash) = @_ ;
- my $source = @{$msg_hash->{'source'}}[0];
- my $header = @{$msg_hash->{'header'}}[0];
-
- daemon_log("gosa-si-server $source is going down, cause registration procedure", 1);
- $main::server_address = "none";
- $main::server_key = "none";
-
- # reinitialization of default values in config file
- &main::read_configfile;
-
- # registrated at new daemon
- &main::register_at_server();
-
- return;
+ # Write changes to file and close it
+ open (FILE, ">$chrony_file");
+ print FILE join("", @new_file);
+ close FILE;
+ &main::daemon_log("INFO: Wrote new configuration file: $chrony_file", 5);
+
+ # Restart chrony deamon
+ my $res = qx(/etc/init.d/chrony force-reload);
+ &main::daemon_log("INFO: restart chrony daemon: $res", 5);
+
+ return;
}
my $goto_secret;
my $admin_base= "";
my $department= "";
+ my $release= "";
my $unit_tag;
# Transform input into array
while ( my ($key, $value) = each(%$msg_hash) ) {
if ($key =~ /^(source|target|header)$/) {
- next;
+ next;
}
foreach $element (@$value) {
- if ($key =~ /^ldap_uri$/) {
- push (@ldap_uris, $element);
- next;
- }
- if ($key =~ /^ldap_base$/) {
- $ldap_base= $element;
- next;
- }
- if ($key =~ /^goto_admin$/) {
- $goto_admin= $element;
- next;
- }
- if ($key =~ /^goto_secret$/) {
- $goto_secret= $element;
- next;
- }
- if ($key =~ /^ldap_cfg$/) {
- push (@ldap_options, "$element");
- next;
- }
- if ($key =~ /^pam_cfg$/) {
- push (@pam_options, "$element");
- next;
- }
- if ($key =~ /^nss_cfg$/) {
- push (@nss_options, "$element");
- next;
- }
- if ($key =~ /^admin_base$/) {
- $admin_base= $element;
- next;
- }
- if ($key =~ /^department$/) {
- $department= $element;
- next;
- }
- if ($key =~ /^unit_tag$/) {
- $unit_tag= $element;
- next;
- }
+ if ($key =~ /^ldap_uri$/) {
+ push (@ldap_uris, $element);
+ next;
+ }
+ if ($key =~ /^ldap_base$/) {
+ $ldap_base= $element;
+ next;
+ }
+ if ($key =~ /^goto_admin$/) {
+ $goto_admin= $element;
+ next;
+ }
+ if ($key =~ /^goto_secret$/) {
+ $goto_secret= $element;
+ next;
+ }
+ if ($key =~ /^ldap_cfg$/) {
+ push (@ldap_options, "$element");
+ next;
+ }
+ if ($key =~ /^pam_cfg$/) {
+ push (@pam_options, "$element");
+ next;
+ }
+ if ($key =~ /^nss_cfg$/) {
+ push (@nss_options, "$element");
+ next;
+ }
+ if ($key =~ /^admin_base$/) {
+ $admin_base= $element;
+ next;
+ }
+ if ($key =~ /^department$/) {
+ $department= $element;
+ next;
+ }
+ if ($key =~ /^unit_tag$/) {
+ $unit_tag= $element;
+ next;
+ }
+ if ($key =~ /^release$/) {
+ $release= $element;
+ next;
+ }
}
}
# Unit tagging enabled?
if (defined $unit_tag){
- push (@pam_options, "pam_filter gosaUnitTag=$unit_tag");
- push (@nss_options, "nss_base_passwd $admin_base?sub?gosaUnitTag=$unit_tag");
- push (@nss_options, "nss_base_group $admin_base?sub?gosaUnitTag=$unit_tag");
- }
-
- # Sanity check
- if(! ref($ldap_base) eq '') {
- daemon_log("Received empty LDAP config. Don't write anything.", 1);
- return;
+ push (@pam_options, "pam_filter gosaUnitTag=$unit_tag");
+ push (@nss_options, "nss_base_passwd $admin_base?sub?gosaUnitTag=$unit_tag");
+ push (@nss_options, "nss_base_group $admin_base?sub?gosaUnitTag=$unit_tag");
}
# Setup ldap.conf
print file1 "$element\n";
}
close (file1);
- daemon_log("wrote $ldap_config", 5);
+ daemon_log("INFO: Wrote $ldap_config", 5);
- # Setup pam_ldap.conf / libnss_ldap.conf
+ # Setup pam_ldap.conf / libnss-ldap.conf
open(file1, "> $pam_config");
open(file2, "> $nss_config");
print file1 "# This file was automatically generated by gosa-si-client. Do not change.\n";
print file2 "$element\n";
}
close (file2);
- daemon_log("wrote $nss_config", 5);
+ daemon_log("INFO: Wrote $nss_config", 5);
close (file1);
- daemon_log("wrote $pam_config", 5);
+ daemon_log("INFO: Wrote $pam_config", 5);
# Create goto.secrets if told so - for compatibility reasons
if (defined $goto_admin){
open(file1, "> /etc/goto/secret");
- close(file1);
- chown(0,0, "/etc/goto/secret");
- chmod(0600, "/etc/goto/secret");
+ close(file1);
+ chown(0,0, "/etc/goto/secret");
+ chmod(0600, "/etc/goto/secret");
open(file1, "> /etc/goto/secret");
- print file1 "GOTOADMIN=\"$goto_admin\"\nGOTOSECRET=\"$goto_secret\"\n";
- close(file1);
- daemon_log("wrote /etc/goto/secret", 5);
+ print file1 "GOTOADMIN=\"$goto_admin\"\nGOTOSECRET=\"$goto_secret\"\n";
+ close(file1);
+ daemon_log("INFO: Wrote /etc/goto/secret", 5);
}
-
-
# Write shell based config
- my $cfg_name= dirname($ldap_config)."/ldap-shell.conf";
- open(file1, "> $cfg_name");
- print file1 "LDAP_BASE=\"$ldap_base\"\n";
- print file1 "ADMIN_BASE=\"$admin_base\"\n";
- print file1 "DEPARTMENT=\"$department\"\n";
- print file1 "UNIT_TAG=\"".(defined $unit_tag ? "$unit_tag" : "")."\"\n";
- print file1 "UNIT_TAG_FILTER=\"".(defined $unit_tag ? "(gosaUnitTag=$unit_tag)" : "")."\"\n";
- close(file1);
- daemon_log("wrote $cfg_name", 5);
+ my $cfg_name= "/etc/ldap/ldap-shell.conf";
+
+ # Get first LDAP server
+ my $ldap_server= $ldap_uris[0];
+ $ldap_server=~ s/^ldap:\/\/([^:]+).*$/$1/;
+
+ open(file1, "> $cfg_name");
+ print file1 "LDAP_BASE=\"$ldap_base\"\n";
+ print file1 "LDAP_SERVER=\"$ldap_server\"\n";
+ print file1 "LDAP_URIS=\"@ldap_uris\"\n";
+ print file1 "ADMIN_BASE=\"$admin_base\"\n";
+ print file1 "DEPARTMENT=\"$department\"\n";
+ print file1 "RELEASE=\"$release\"\n";
+ print file1 "UNIT_TAG=\"".(defined $unit_tag ? "$unit_tag" : "")."\"\n";
+ print file1 "UNIT_TAG_FILTER=\"".(defined $unit_tag ? "(gosaUnitTag=$unit_tag)" : "")."\"\n";
+ close(file1);
+ daemon_log("INFO: Wrote $cfg_name", 5);
+
+ # Write offline config
+ if ($offline_enabled){
+ $cfg_name= "/etc/ldap/ldap-offline.conf";
+
+ # Get first LDAP server
+ open(file1, "> $cfg_name");
+ print file1 "LDAP_BASE=\"$ldap_base\"\n";
+ print file1 "LDAP_SERVER=\"127.0.0.1\"\n";
+ print file1 "LDAP_URIS=\"ldap://127.0.0.1\"\n";
+ print file1 "ADMIN_BASE=\"$admin_base\"\n";
+ print file1 "DEPARTMENT=\"$department\"\n";
+ print file1 "RELEASE=\"$release\"\n";
+ print file1 "UNIT_TAG=\"".(defined $unit_tag ? "$unit_tag" : "")."\"\n";
+ print file1 "UNIT_TAG_FILTER=\"".(defined $unit_tag ? "(gosaUnitTag=$unit_tag)" : "")."\"\n";
+ close(file1);
+ daemon_log("INFO: Wrote $cfg_name", 5);
+ }
- return;
+ # Set permissions and ownership structure of
+ chown(0, 0, $cfg_name);
+ chmod(0644, $cfg_name);
+
+ # Allow custom scripts to be executed
+ if (defined $ldap_config_exit_hook) {
+ system($ldap_config_exit_hook);
+ daemon_log("executed hook $ldap_config_exit_hook", 5);
+ }
+ return;
}
+
sub new_key {
- # my ($msg_hash) = @_ ;
+ # Create new key
my $new_server_key = &main::create_passwd();
- my $out_hash = &create_xml_hash("new_key", $main::client_address, $main::server_address, $new_server_key);
- my $out_msg = &create_xml_string($out_hash);
- return $out_msg;
+ # Send new_key message to server
+ my $errSend = &main::send_msg_hash_to_target(
+ &main::create_xml_hash("new_key", $main::client_address, $main::server_address, $new_server_key),
+ $main::server_address,
+ $main::server_key,
+ );
+
+ # Set global key
+ if (not $errSend) {
+ $main::server_key = $new_server_key;
+ }
+
+ return;
}
+sub confirm_new_key {
+ my ($msg, $msg_hash) = @_ ;
+ my $source = @{$msg_hash->{'source'}}[0];
+
+ &main::daemon_log("confirm new key from $source", 5);
+ return;
+
+}
-sub detect_hardware {
+sub detect_hardware {
&write_to_file('goto-hardware-detection-start', $fai_logpath);
&write_to_file('goto-hardware-detection-stop', $fai_logpath);
- return &main::send_msg_hash2address(
+ &main::send_msg_hash_to_target(
&main::create_xml_hash("detected_hardware", $main::client_address, $main::server_address, $result),
$main::server_address,
$main::server_key,
);
+
+ return;
}
my $header = @{$msg_hash->{'header'}}[0];
my $source = @{$msg_hash->{'source'}}[0];
my $target = @{$msg_hash->{'target'}}[0];
-
- # switch target and source and send msg back
- my $out_hash = &main::create_xml_hash("got_ping", $target, $source);
- my $out_msg = &main::create_xml_string($out_hash);
+ my $session_id = @{$msg_hash->{'session_id'}}[0];
+ my $out_msg;
+ my $out_hash;
+
+ # there is no session_id so send 'got_new_ping'-msg
+ if (not defined $session_id) {
+ $out_hash = &main::create_xml_hash("got_new_ping", $target, $source);
+
+ # there is a session_id so send 'answer_$session_id'-msg because there is
+ # a process waiting for this message
+ } else {
+ $out_hash = &main::create_xml_hash("answer_$session_id", $target, $source);
+ &add_content2xml_hash($out_hash, "session_id", $session_id);
+ }
+
+ my $forward_to_gosa = @{$msg_hash->{'forward_to_gosa'}}[0];
+ if (defined $forward_to_gosa) {
+ &add_content2xml_hash($out_hash, "forward_to_gosa", $forward_to_gosa);
+ }
+ $out_msg = &main::create_xml_string($out_hash);
return $out_msg;
}
-
1;