![[tokkee]](http://tokkee.org/images/avatar.png){kind=avatar}
diff --git a/git-stash.sh b/git-stash.sh
index a305fb19f11bc4ae80e585b102ecb5d982d1a0f5..fa5a43e579f29a52e06295ca22fbc438b78e802c 100755 (executable)
--- a/git-stash.sh
+++ b/git-stash.sh
OPTIONS_SPEC=
START_DIR=`pwd`
. git-sh-setup
+. git-sh-i18n
require_work_tree
cd_to_toplevel
clear_stash () {
if test $# != 0
then
- die "git stash clear with parameters is unimplemented"
+ die "$(gettext "git stash clear with parameters is unimplemented")"
fi
if current=$(git rev-parse --verify $ref_stash 2>/dev/null)
then
then
head=$(git rev-list --oneline -n 1 HEAD --)
else
- die "You do not have the initial commit yet"
+ die "$(gettext "You do not have the initial commit yet")"
fi
if branch=$(git symbolic-ref -q HEAD)
i_tree=$(git write-tree) &&
i_commit=$(printf 'index on %s\n' "$msg" |
git commit-tree $i_tree -p $b_commit) ||
- die "Cannot save the current index state"
+ die "$(gettext "Cannot save the current index state")"
if test -z "$patch_mode"
then
git write-tree &&
rm -f "$TMPindex"
) ) ||
- die "Cannot save the current worktree state"
+ die "$(gettext "Cannot save the current worktree state")"
else
# state of the working tree
w_tree=$(GIT_INDEX_FILE="$TMP-index" git write-tree) ||
- die "Cannot save the current worktree state"
+ die "$(gettext "Cannot save the current worktree state")"
git diff-tree -p HEAD $w_tree > "$TMP-patch" &&
test -s "$TMP-patch" ||
- die "No changes selected"
+ die "$(gettext "No changes selected")"
rm -f "$TMP-index" ||
- die "Cannot remove temporary index (can't happen)"
+ die "$(gettext "Cannot remove temporary index (can't happen)")"
fi
fi
w_commit=$(printf '%s\n' "$stash_msg" |
git commit-tree $w_tree -p $b_commit -p $i_commit) ||
- die "Cannot record working tree state"
+ die "$(gettext "Cannot record working tree state")"
}
save_stash () {
keep_index=t
;;
--no-keep-index)
- keep_index=
+ keep_index=n
;;
-p|--patch)
patch_mode=t
- keep_index=t
+ # only default to keep if we don't already have an override
+ test -z "$keep_index" && keep_index=t
;;
-q|--quiet)
GIT_QUIET=t
break
;;
-*)
- echo "error: unknown option for 'stash save': $1"
- echo " To provide a message, use git stash save -- '$1'"
+ option="$1"
+ # TRANSLATORS: $option is an invalid option, like
+ # `--blah-blah'. The 7 spaces at the beginning of the
+ # second line correspond to "error: ". So you should line
+ # up the second line with however many characters the
+ # translation of "error: " takes in your language. E.g. in
+ # English this is:
+ #
+ # $ git stash save --blah-blah 2>&1 | head -n 2
+ # error: unknown option for 'stash save': --blah-blah
+ # To provide a message, use git stash save -- '--blah-blah'
+ eval_gettext "$("error: unknown option for 'stash save': \$option
+ To provide a message, use git stash save -- '\$option'")"; echo
usage
;;
*)
git update-index -q --refresh
if no_changes
then
- say 'No local changes to save'
+ say "$(gettext "No local changes to save")"
exit 0
fi
test -f "$GIT_DIR/logs/$ref_stash" ||
- clear_stash || die "Cannot initialize stash"
+ clear_stash || die "$(gettext "Cannot initialize stash")"
create_stash "$stash_msg"
: >>"$GIT_DIR/logs/$ref_stash"
git update-ref -m "$stash_msg" $ref_stash $w_commit ||
- die "Cannot save the current status"
+ die "$(gettext "Cannot save the current status")"
say Saved working directory and index state "$stash_msg"
if test -z "$patch_mode"
then
git reset --hard ${GIT_QUIET:+-q}
- if test -n "$keep_index" && test -n $i_tree
+ if test "$keep_index" = "t" && test -n $i_tree
then
git read-tree --reset -u $i_tree
fi
else
git apply -R < "$TMP-patch" ||
- die "Cannot remove worktree changes"
+ die "$(gettext "Cannot remove worktree changes")"
- if test -z "$keep_index"
+ if test "$keep_index" != "t"
then
git reset
fi
b_tree=
i_tree=
- REV=$(git rev-parse --no-flags --symbolic "$@" 2>/dev/null)
+ REV=$(git rev-parse --no-flags --symbolic "$@") || exit 1
FLAGS=
for opt
case $# in
0)
- have_stash || die "No stash found."
+ have_stash || die "$(gettext "No stash found.")"
set -- ${ref_stash}@{0}
;;
1)
:
;;
*)
- die "Too many revisions specified: $REV"
+ die "$(eval_gettext "Too many revisions specified: \$REV")"
;;
esac
- REV=$(git rev-parse --quiet --symbolic --verify $1 2>/dev/null) || die "$1 is not valid reference"
+ REV=$(git rev-parse --quiet --symbolic --verify $1 2>/dev/null) || {
+ reference="$1"
+ die "$(eval_gettext "\$reference is not valid reference")"
+ }
i_commit=$(git rev-parse --quiet --verify $REV^2 2>/dev/null) &&
set -- $(git rev-parse $REV $REV^1 $REV: $REV^1: $REV^2: 2>/dev/null) &&
IS_STASH_LIKE=t &&
test "$ref_stash" = "$(git rev-parse --symbolic-full-name "${REV%@*}")" &&
IS_STASH_REF=t
-
- if test "${REV}" != "${REV%{*\}}"
- then
- # maintainers: it would be better if git rev-parse indicated
- # this condition with a non-zero status code but as of 1.7.2.1 it
- # it did not. So, we use non-empty stderr output as a proxy for the
- # condition of interest.
- test -z "$(git rev-parse "$REV" 2>&1 >/dev/null)" || die "$REV does not exist in the stash log"
- fi
-
}
is_stash_like()
}
assert_stash_like() {
- is_stash_like "$@" || die "'$*' is not a stash-like commit"
+ is_stash_like "$@" || {
+ args="$*"
+ die "$(eval_gettext "'\$args' is not a stash-like commit")"
+ }
}
is_stash_ref() {
}
assert_stash_ref() {
- is_stash_ref "$@" || die "'$*' is not a stash reference"
+ is_stash_ref "$@" || {
+ args="$*"
+ die "$(eval_gettext "'\$args' is not a stash reference")"
+ }
}
apply_stash () {
assert_stash_like "$@"
- git update-index -q --refresh &&
- git diff-files --quiet --ignore-submodules ||
- die 'Cannot apply to a dirty working tree, please stage your changes'
+ git update-index -q --refresh || die "$(gettext "unable to refresh index")"
# current index state
c_tree=$(git write-tree) ||
- die 'Cannot apply a stash in the middle of a merge'
+ die "$(gettext "Cannot apply a stash in the middle of a merge")"
unstashed_index_tree=
if test -n "$INDEX_OPTION" && test "$b_tree" != "$i_tree" &&
then
git diff-tree --binary $s^2^..$s^2 | git apply --cached
test $? -ne 0 &&
- die 'Conflicts in index. Try without --index.'
+ die "$(gettext "Conflicts in index. Try without --index.")"
unstashed_index_tree=$(git write-tree) ||
- die 'Could not save index tree'
+ die "$(gettext "Could not save index tree")"
git reset
fi
git diff-index --cached --name-only --diff-filter=A $c_tree >"$a" &&
git read-tree --reset $c_tree &&
git update-index --add --stdin <"$a" ||
- die "Cannot unstage modified files"
+ die "$(gettext "Cannot unstage modified files")"
rm -f "$a"
fi
squelch=
status=$?
if test -n "$INDEX_OPTION"
then
- echo >&2 'Index was not unstashed.'
+ (
+ gettext "Index was not unstashed." &&
+ echo
+ ) >&2
fi
exit $status
fi
}
apply_to_branch () {
- test -n "$1" || die 'No branch name specified'
+ test -n "$1" || die "$(gettext "No branch name specified")"
branch=$1
shift 1
case $# in
0)
save_stash &&
- say '(To restore them type "git stash apply")'
+ say "$(gettext "(To restore them type \"git stash apply\")")"
;;
*)
usage