diff --git a/git-bisect.sh b/git-bisect.sh
index 97ac600873ebd0dff6310071343403a41a867b8a..17a35f6adc79480d0533a4ff98b2817c836a7e78 100755 (executable)
--- a/git-bisect.sh
+++ b/git-bisect.sh
mark <rev> a known-bad revision.
git bisect good [<rev>...]
mark <rev>... known-good revisions.
-git bisect skip [<rev>...]
+git bisect skip [(<rev>|<range>)...]
mark <rev>... untestable revisions.
git bisect next
find next bisection to test and check it out.
test -n "$nolog" || echo "git bisect $state $rev" >>"$GIT_DIR/BISECT_LOG"
}
+is_expected_rev() {
+ test -f "$GIT_DIR/BISECT_EXPECTED_REV" &&
+ test "$1" = $(cat "$GIT_DIR/BISECT_EXPECTED_REV")
+}
+
+mark_expected_rev() {
+ echo "$1" > "$GIT_DIR/BISECT_EXPECTED_REV"
+}
+
+check_expected_revs() {
+ for _rev in "$@"; do
+ if ! is_expected_rev "$_rev"; then
+ rm -f "$GIT_DIR/BISECT_ANCESTORS_OK"
+ rm -f "$GIT_DIR/BISECT_EXPECTED_REV"
+ return
+ fi
+ done
+}
+
+bisect_skip() {
+ all=''
+ for arg in "$@"
+ do
+ case "$arg" in
+ *..*)
+ revs=$(git rev-list "$arg") || die "Bad rev input: $arg" ;;
+ *)
+ revs=$(sq "$arg") ;;
+ esac
+ all="$all $revs"
+ done
+ eval bisect_state 'skip' $all
+}
+
bisect_state() {
bisect_autostart
state=$1
1,bad|1,good|1,skip)
rev=$(git rev-parse --verify HEAD) ||
die "Bad rev input: HEAD"
- bisect_write "$state" "$rev" ;;
+ bisect_write "$state" "$rev"
+ check_expected_revs "$rev" ;;
2,bad|*,good|*,skip)
shift
eval=''
die "Bad rev input: $rev"
eval="$eval bisect_write '$state' '$sha'; "
done
- eval "$eval" ;;
+ eval "$eval"
+ check_expected_revs "$@" ;;
*,bad)
die "'git bisect bad' can take only one argument." ;;
*)
bisect_next_check && bisect_next || :
}
-eval_rev_list() {
- _eval="$1"
-
- eval $_eval
- res=$?
-
- if [ $res -ne 0 ]; then
- echo >&2 "'git rev-list --bisect-vars' failed:"
- echo >&2 "maybe you mistake good and bad revs?"
- exit $res
- fi
-
- return $res
-}
-
filter_skipped() {
_eval="$1"
_skip="$2"
if [ -z "$_skip" ]; then
- eval_rev_list "$_eval"
+ eval "$_eval"
return
fi
# Let's parse the output of:
# "git rev-list --bisect-vars --bisect-all ..."
- eval_rev_list "$_eval" | while read hash line
+ eval "$_eval" | while read hash line
do
case "$VARS,$FOUND,$TRIED,$hash" in
# We display some vars.
fi
}
+bisect_checkout() {
+ _rev="$1"
+ _msg="$2"
+ echo "Bisecting: $_msg"
+ mark_expected_rev "$_rev"
+ git checkout -q "$_rev" || exit
+ git show-branch "$_rev"
+}
+
+is_among() {
+ _rev="$1"
+ _list="$2"
+ case "$_list" in *$_rev*) return 0 ;; esac
+ return 1
+}
+
+handle_bad_merge_base() {
+ _badmb="$1"
+ _good="$2"
+ if is_expected_rev "$_badmb"; then
+ cat >&2 <<EOF
+The merge base $_badmb is bad.
+This means the bug has been fixed between $_badmb and [$_good].
+EOF
+ exit 3
+ else
+ cat >&2 <<EOF
+Some good revs are not ancestor of the bad rev.
+git bisect cannot work properly in this case.
+Maybe you mistake good and bad revs?
+EOF
+ exit 1
+ fi
+}
+
+handle_skipped_merge_base() {
+ _mb="$1"
+ _bad="$2"
+ _good="$3"
+ cat >&2 <<EOF
+Warning: the merge base between $_bad and [$_good] must be skipped.
+So we cannot be sure the first bad commit is between $_mb and $_bad.
+We continue anyway.
+EOF
+}
+
+#
+# "check_merge_bases" checks that merge bases are not "bad".
+#
+# - If one is "good", that's good, we have nothing to do.
+# - If one is "bad", it means the user assumed something wrong
+# and we must exit.
+# - If one is "skipped", we can't know but we should warn.
+# - If we don't know, we should check it out and ask the user to test.
+#
+# In the last case we will return 1, and otherwise 0.
+#
+check_merge_bases() {
+ _bad="$1"
+ _good="$2"
+ _skip="$3"
+ for _mb in $(git merge-base --all $_bad $_good)
+ do
+ if is_among "$_mb" "$_good"; then
+ continue
+ elif test "$_mb" = "$_bad"; then
+ handle_bad_merge_base "$_bad" "$_good"
+ elif is_among "$_mb" "$_skip"; then
+ handle_skipped_merge_base "$_mb" "$_bad" "$_good"
+ else
+ bisect_checkout "$_mb" "a merge base must be tested"
+ return 1
+ fi
+ done
+ return 0
+}
+
+#
+# "check_good_are_ancestors_of_bad" checks that all "good" revs are
+# ancestor of the "bad" rev.
+#
+# If that's not the case, we need to check the merge bases.
+# If a merge base must be tested by the user we return 1 and
+# otherwise 0.
+#
+check_good_are_ancestors_of_bad() {
+ test -f "$GIT_DIR/BISECT_ANCESTORS_OK" &&
+ return
+
+ _bad="$1"
+ _good=$(echo $2 | sed -e 's/\^//g')
+ _skip="$3"
+
+ # Bisecting with no good rev is ok
+ test -z "$_good" && return
+
+ _side=$(git rev-list $_good ^$_bad)
+ if test -n "$_side"; then
+ # Return if a checkout was done
+ check_merge_bases "$_bad" "$_good" "$_skip" || return
+ fi
+
+ : > "$GIT_DIR/BISECT_ANCESTORS_OK"
+
+ return 0
+}
+
bisect_next() {
case "$#" in 0) ;; *) usage ;; esac
bisect_autostart
bisect_next_check good
+ # Get bad, good and skipped revs
+ bad=$(git rev-parse --verify refs/bisect/bad) &&
+ good=$(git for-each-ref --format='^%(objectname)' \
+ "refs/bisect/good-*" | tr '\012' ' ') &&
skip=$(git for-each-ref --format='%(objectname)' \
"refs/bisect/skip-*" | tr '\012' ' ') || exit
+ # Maybe some merge bases must be tested first
+ check_good_are_ancestors_of_bad "$bad" "$good" "$skip"
+ # Return now if a checkout has already been done
+ test "$?" -eq "1" && return
+
+ # Get bisection information
BISECT_OPT=''
test -n "$skip" && BISECT_OPT='--bisect-all'
-
- bad=$(git rev-parse --verify refs/bisect/bad) &&
- good=$(git for-each-ref --format='^%(objectname)' \
- "refs/bisect/good-*" | tr '\012' ' ') &&
eval="git rev-list --bisect-vars $BISECT_OPT $good $bad --" &&
eval="$eval $(cat "$GIT_DIR/BISECT_NAMES")" &&
eval=$(filter_skipped "$eval" "$skip") &&
# commit is also a "skip" commit (see above).
exit_if_skipped_commits "$bisect_rev"
- echo "Bisecting: $bisect_nr revisions left to test after this"
- git checkout -q "$bisect_rev" || exit
- git show-branch "$bisect_rev"
+ bisect_checkout "$bisect_rev" "$bisect_nr revisions left to test after this"
}
bisect_visualize() {
do
git update-ref -d $ref $hash || exit
done
+ rm -f "$GIT_DIR/BISECT_EXPECTED_REV" &&
+ rm -f "$GIT_DIR/BISECT_ANCESTORS_OK" &&
rm -f "$GIT_DIR/BISECT_LOG" &&
rm -f "$GIT_DIR/BISECT_NAMES" &&
rm -f "$GIT_DIR/BISECT_RUN" &&
git bisect -h ;;
start)
bisect_start "$@" ;;
- bad|good|skip)
+ bad|good)
bisect_state "$cmd" "$@" ;;
+ skip)
+ bisect_skip "$@" ;;
next)
# Not sure we want "next" at the UI level anymore.
bisect_next "$@" ;;