diff --git a/doc/user_guide.txt b/doc/user_guide.txt
index 3149d25822ccd100d4a895f68dbcb875037e7526..474dcdc222e931fbeed880977d934f5c5213a53a 100644 (file)
--- a/doc/user_guide.txt
+++ b/doc/user_guide.txt
User Guide
==========
-:Version: $Revision: 1.10 $
+:Version: $Revision: 1.27 $
.. contents::
-Note: this document will refer to *issues* as the primary store of information
-in the tracker. This is the default of the classic template, bubt may vary in
-any given installation.
+Note: this document will refer to *issues* as the primary store of
+information in the tracker. This is the default of the classic template,
+but may vary in any given installation.
+
Your Tracker in a Nutshell
==========================
-Your tracker holds information about issues in bundles we call *items*. An
-item may be an *issue* (a bug or feature request) or a *user*. The issue-ness or
-user-ness is called the item's *class*. So, for bug reports and features, the
-class is "issue", and for users the class is "user".
+Your tracker holds information about issues in bundles we call *items*.
+An item may be an *issue* (a bug or feature request) or a *user*. The
+issue-ness or user-ness is called the item's *class*. So, for bug
+reports and features, the class is "issue", and for users the class is
+"user".
+
+Each item in the tracker has an id number that identifies it along with
+its item class. To identify a particular issue or user, we combine the
+class with the number to create a unique label, so that user 1 (who,
+incidentally, is *always* the "admin" user) is referred to as "user1".
+Issue number 315 is referred to as "issue315". We call that label the
+item's *designator*.
+
+Items in the database are never deleted, they're just "retired". You
+can still refer to them by ID - hence removing an item won't break
+references to the item. It's just that the item won't appear in any
+listings.
-Each item in the tracker has an id number that identifies it along with its
-item class. To identify a particular issue or user, we combine the class with
-the number to create a unique label, so that user 1 (who, incidentally, is
-*always* the "admin" user) is referred to as "user1". Issue number 315 is
-referred to as "issue315". We call that label the item's *designator*.
Accessing the Tracker
---------------------
2. through the `e-mail gateway`_, or
3. using the `command line tool`_.
-The last is usually only used by administrators. Most users will use the web
-and email interfaces. All three are explained below.
+The last is usually only used by administrators. Most users will use the
+web and email interfaces. All three are explained below.
+
+
+Issue life cycles in Roundup
+----------------------------
+
+New issues may be submitted via the web or email.
+
+By default, the issue will have the status "unread". If another message
+is received for the issue, its status will change to "chatting".
+
+The "home" page for a tracker will generally display all issues which
+are not "resolved.
+
+If an issue is closed, and a new message is received then it'll be
+reopened to the state of "chatting".
+
+
+Entering values in your Tracker
+-------------------------------
+
+All interfaces to your tracker use the same format for entering values.
+This means the web interface for entering a new issue, the web interface
+for searching issues, the email interface and even the command-line
+administration tool.
+
+
+String and Numeric properties
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+These fields just take a simple text value, like ``It's broken``.
+
+
+Boolean properties
+~~~~~~~~~~~~~~~~~~
+
+These fields take a value which indicates "yes"/"no", "true"/"false",
+"1"/"0" or "on"/"off".
+
+
+Constrained (link and multilink) properties
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Fields like "Assigned To" and "Topics" hold references to items in other
+classes ("user" and "keyword" in those two cases.)
+
+Sometimes, the selection is done through a menu, like in the "Assigned
+To" field.
+
+Where the input is not a simple menu selection, we use a comma-separated
+list of values to indicated which values of "user" or "keyword" are
+interesting. The values may be either numeric ids or the names of items.
+The special value "-1" may be used to match items where the property is
+not set. For example, the following searches on the issues:
+
+``assignedto=richard,george``
+ match issues which are assigned to richard or george.
+``assignedto=-1``
+ match issues that are not assigned to a user.
+``assignedto=2,3,40``
+ match issues that are assigned to users 2, 3 or 40.
+``topic=user interface``
+ match issues with the keyword "user interface" in their topic list
+``topic=web interface,email interface``
+ match issues with the keyword "web interface" or "email interface" in
+ their topic list
+``topic=-1``
+ match issues with no topics set
+
+
+Date properties
+~~~~~~~~~~~~~~~
+
+Some fields in the search page (e.g. "Activity" or "Creation date") hold
+dates. A plain date entered as a search field will match that date
+exactly in the database. We may also accept ranges of dates. You can
+specify range of dates in one of two formats:
+
+1. English syntax::
+
+ [From <value>][To <value>]
+
+ Keywords "From" and "To" are case insensitive. Keyword "From" is
+ optional.
+
+2. "Geek" syntax::
+
+ [<value>];[<value>]
+
+Either first or second ``<value>`` can be omitted in both syntaxes.
+
+For example, if you enter string "from 9:00" to "Creation date" field,
+roundup will find all issues, that were created today since 9 AM.
+
+Searching of "-2m; -1m" on activity field gives you issues which were
+active between period of time since 2 months up-till month ago.
+
+Other possible examples (consider local time is Sat Mar 8 22:07:48
+2003)::
+
+ >>> Range("from 2-12 to 4-2")
+ <Range from 2003-02-12.00:00:00 to 2003-04-02.00:00:00>
+
+ >>> Range("FROM 18:00 TO +2m")
+ <Range from 2003-03-08.18:00:00 to 2003-05-08.20:07:48>
+
+ >>> Range("12:00;")
+ <Range from 2003-03-08.12:00:00 to None>
+
+ >>> Range("tO +3d")
+ <Range from None to 2003-03-11.20:07:48>
+
+ >>> Range("2002-11-10; 2002-12-12")
+ <Range from 2002-11-10.00:00:00 to 2002-12-12.00:00:00>
+
+ >>> Range("; 20:00 +1d")
+ <Range from None to 2003-03-09.20:00:00>
+
+ >>> Range("2003")
+ <Range from 2003-01-01.00:00:00 to 2003-12-31.23:59:59>
+
+ >>> Range("2003-04")
+ <Range from 2003-04-01.00:00:00 to 2003-04-30.23:59:59>
+
+
+Interval properties
+~~~~~~~~~~~~~~~~~~~
+
+XXX explain...
+
+When searching on interval properties use the same syntax as for dates.
+
+
+Simple support for collision detection
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Item edit pages remember when the item was last edited. When a form is
+submitted, the user will be informed if someone else has edited the item
+at the same time they tried to.
Web Interface
=============
-Note: this document contains screenshots of the default look and feel. Your
-site may have a slightly (or very) different look, but the functionality will
-be very similar, and the concepts still hold.
+Note: this document contains screenshots of the default look and feel.
+Your site may have a slightly (or very) different look, but the
+functionality will be very similar, and the concepts still hold.
The web interface is broken up into the following parts:
Lists of Items
--------------
-The first thing you'll see when you log into Roundup will be a list of open
-(ie. not resolved) issues. This list has been generated by a bunch of controls
-`under the covers`_ but for now, you can see something like:
+The first thing you'll see when you log into Roundup will be a list of
+open (ie. not resolved) issues. This list has been generated by a bunch
+of controls `under the covers`_ but for now, you can see something like:
.. img: images/index_logged_out.png
.. img: images/index_logged_in.png
-Note that the sidebar menu has changed slightly, so you can now get to your
-"My Details" page:
+Note that the sidebar menu has changed slightly, so you can now get to
+your "My Details" page:
.. img: images/my_details.png
Display, edit or entry of an item
---------------------------------
-Create a new issue with "create new" under the issue subheading. This will
-take you to:
+Create a new issue with "create new" under the issue subheading. This
+will take you to:
.. img: images/new_issue.png
-The `nosy list`_ is explained below.
-Enter some information and click "submit new entry" and you'll be rewarded
-with:
+The `nosy list`_ is explained below. Enter some information and click
+"submit new entry" and you'll be rewarded with:
.. img: images/new_issue_created.png
Searching Page
--------------
-XXX: some information about how searching works
+See `entering values in your tracker`_ for an explanation of what you
+may type into the search form.
+
+
+Saving queries
+~~~~~~~~~~~~~~
+
+You may save queries in the tracker by giving the query a name. Each user
+may only have one query with a given name - if a subsequent search is
+performed with the same query name supplied, then it will edit the
+existing query of the same name.
+
+Queries may be marked as "private". These queries are only visible to the
+user that created them. If they're not marked "private" then all other
+users may include the query in their list of "Your Queries". Marking it as
+private at a later date does not affect users already using the query, nor
+does deleting the query.
+
+If a user subsequently creates or edits a public query, a new personal
+version of that query is made, with the same editing rules as described
+above.
Under the covers
-----------------
+~~~~~~~~~~~~~~~~
-Index views may be modified by the following arguments:
+The searching page converts your selections into the following
+arguments:
========== =============================================================
Argument Description
========== =============================================================
-:sort sort by prop name, optionally preceeded with '-'
- to give descending or nothing for ascending sorting.
-:group group by prop name, optionally preceeded with '-' or
- to sort in descending or nothing for ascending order.
+:sort sort by prop name, optionally preceeded with '-' to give
+ descending or nothing for ascending sorting.
+:group group by prop name, optionally preceeded with '-' or to sort
+ in descending or nothing for ascending order.
:filter selects which props should be displayed in the filter
section. Default is all.
-:columns selects the columns that should be displayed.
- Default is all.
-propname selects the values the item properties given by propname
- must have (very basic search/filter).
+:columns selects the columns that should be displayed. Default is
+ all.
+propname selects the values the item properties given by propname must
+ have (very basic search/filter).
========== =============================================================
+You may manually write URLS that contain these arguments, like so
+(whitespace has been added for clarity)::
+
+ /issue?status=unread,in-progress,resolved&
+ topic=security,ui&
+ :group=priority&
+ :sort=-activity&
+ :filters=status,topic&
+ :columns=title,status,fixer
+
+
Access Controls
---------------
-XXX
+User access is controlled through Permissions. These are are grouped
+into Roles, and users have a comma-separated list of Roles assigned to
+them.
+
+Permissions divide access controls up into answering questions like:
+
+- may the user edit issues ("Edit", "issue")
+- is the user allowed to use the web interface ("Web Access")
+- may the user edit other user's Roles through the web ("Web Roles")
+
+Any number of new Permissions and Roles may be created as described in
+the customisation documentation. Examples of new access controls are:
+
+- only managers may sign off issues as complete
+- don't give users who register through email web access
+- let some users edit the details of all users
E-Mail Gateway
E-mail sent to Roundup is examined for several pieces of information:
1. `subject-line information`_ identifying the purpose of the e-mail
-2. `e-mail message content`_ which is to be extracted
-3. e-mail attachments which should be associated with the message
+2. `sender identification`_ using the sender of the message
+3. `e-mail message content`_ which is to be extracted
+4. e-mail attachments which should be associated with the message
+
Subject-line information
------------------------
2. the type of item the message should create, or
3. we default the item class and try some trickiness
-If the subject line contains a prefix in ``[square brackets]`` then we're
-looking at case 1 or 2 above. Note that any "re:" or "fwd:" prefixes are
-stripped off the subject line before we start looking for real information.
+If the subject line contains a prefix in ``[square brackets]`` then
+we're looking at case 1 or 2 above. Note that any "re:" or "fwd:"
+prefixes are stripped off the subject line before we start looking for
+real information.
+
+If an item designator (class name and id number, for example
+``issue123``) is found there, a new "msg" item is added to the
+"messages" property for that item, and any new "file" items are added to
+the "files" property for the item.
-If an item designator (class name and id number, for example ``issue123``)
-is found there, a new "msg" item is added to the "messages" property for
-that item, and any new "file" items are added to the "files" property for
-the item.
+If just an item class name is found there, we attempt to create a new
+item of that class with its "messages" property initialized to contain
+the new "msg" item and its "files" property initialized to contain any
+new "file" items.
-If just an item class name is found there, we attempt to create a new item of
-that class with its "messages" property initialized to contain the new "msg"
-item and its "files" property initialized to contain any new "file" items.
+The third case above - where no ``[information]`` is provided, the
+tracker's ``MAIL_DEFAULT_CLASS`` configuration variable defines what
+class of item the message relates to. We try to match the subject line
+to an existing item of the default class, and if there's a match, the
+message is related to that matched item. If not, then a new item of the
+default class is created.
-The third case above - where no ``[information]`` is provided, the tracker's
-``MAIL_DEFAULT_CLASS`` configuration variable defines what class of item
-the message relates to. We try to match the subject line to an existing
-item of the default class, and if there's a match, the message is related to
-that matched item. If not, then a new item of the default class is created.
Setting Properties
~~~~~~~~~~~~~~~~~~
-The e-mail interface also provides a simple way to set properties on items. At
-the end of the subject line, propname=value pairs can be specified in square
-brackets, using the same conventions as for the roundup set shell command.
+The e-mail interface also provides a simple way to set properties on
+items. At the end of the subject line, propname=value pairs can be
+specified in square brackets, using the same conventions as for the
+roundup set shell command.
For example,
Subject: Re: [issue2] we're out of widgets [nosy=+richard]
-- setting the nosy list to just you::
+- setting the nosy list to just you and cliff::
- Subject: Re: [issue2] we're out of widgets [nosy=richard]
+ Subject: Re: [issue2] we're out of widgets [nosy=richard,cliff]
-- removing yourself from a nosy list::
+- removing yourself from a nosy list and setting the priority::
- Subject: Re: [issue2] we're out of widgets [nosy=-richard]
+ Subject: Re: [issue2] we're out of widgets [nosy=-richard;priority=bug]
-In all cases, the message relates to issue 2. The ``Re:`` prefix is stripped
-off.
+In all cases, the message relates to issue 2. The ``Re:`` prefix is
+stripped off.
Automatic Properties
~~~~~~~~~~~~~~~~~~~~
**status of new issues**
- When a new message is received that is not identified as being related to an
- existing issue, it creates a new issue. The status of the new issue is
- defaulted to "unread".
+ When a new message is received that is not identified as being related
+ to an existing issue, it creates a new issue. The status of the new
+ issue is defaulted to "unread".
**reopening of resolved issues**
When a message is is received for a resolved issue, the issue status is
received.
+Sender identification
+---------------------
+
+If the sender of an email is unknown to Roundup (looking up both user
+primary email addresses and their alternate addresses) then a new user
+will be created. The new user will have their username set to the "user"
+part of "user@domain" in their email address. Their password will be
+completely randomised, and they'll have to visit the web interface to
+have it changed. Note that some sites don't allow web access by users
+who register via email like this.
+
+
E-Mail Message Content
----------------------
-Roundup only associates plain text (MIME type ``text/plain``) as messages for
-items. Any other parts of a message are associated as downloadable files. If
-no plain text part is found, the message is rejected.
+Roundup only associates plain text (MIME type ``text/plain``) as
+messages for items. Any other parts of a message are associated as
+downloadable files. If no plain text part is found, the message is
+rejected.
To do this, incoming messages are examined for multiple parts:
* In a multipart/mixed message or part, each subpart is extracted and
- examined. The text/plain subparts are assembled to form the textual body
- of the message, to be stored in the file associated with a "msg" class
- item. Any parts of other types are each stored in separate files and
- given "file" class items that are linked to the "msg" item.
+ examined. The text/plain subparts are assembled to form the textual
+ body of the message, to be stored in the file associated with a "msg"
+ class item. Any parts of other types are each stored in separate files
+ and given "file" class items that are linked to the "msg" item.
* In a multipart/alternative message or part, we look for a text/plain
subpart and ignore the other parts.
Message summary
~~~~~~~~~~~~~~~
-The "summary" property on message items is taken from the first non-quoting
-section in the message body. The message body is divided into sections by blank
-lines. Sections where the second and all subsequent lines begin with a ">" or
-"|" character are considered "quoting sections". The first line of the first
-non-quoting section becomes the summary of the message.
+The "summary" property on message items is taken from the first
+non-quoting section in the message body. The message body is divided
+into sections by blank lines. Sections where the second and all
+subsequent lines begin with a ">" or "|" character are considered
+"quoting sections". The first line of the first non-quoting section
+becomes the summary of the message.
Address handling
----------------
All of the addresses in the ``To:`` and ``Cc:`` headers of the incoming
-message are
-looked up among the tracker users, and the corresponding users are placed
-in the
-"recipients" property on the new "msg" item. The address in the ``From:`` header
-similarly determines the "author" property of the new "msg" item. The default
-handling for addresses that don't have corresponding users is to create new
-users with no passwords and a username equal to the address.
+message are looked up among the tracker users, and the corresponding
+users are placed in the "recipients" property on the new "msg" item. The
+address in the ``From:`` header similarly determines the "author"
+property of the new "msg" item. The default handling for addresses that
+don't have corresponding users is to create new users with no passwords
+and a username equal to the address.
The addresses mentioned in the ``To:``, ``From:`` and ``Cc:`` headers of
the message may be added to the `nosy list`_ depending on:
``ADD_AUTHOR_TO_NOSY``
Does the author of a message get placed on the nosy list automatically?
If 'new' is used, then the author will only be added when a message
- creates a new issue. If 'yes', then the author will be added on followups
- too. If 'no', they're never added to the nosy.
+ creates a new issue. If 'yes', then the author will be added on
+ followups too. If 'no', they're never added to the nosy.
``ADD_RECIPIENTS_TO_NOSY``
Do the recipients (To:, Cc:) of a message get placed on the nosy list?
Roundup watches for additions to the "messages" property of items.
-When a new message is added, it is sent to all the users
-on the "nosy" list for the item that are not already on the "recipients" list
-of the message. Those users are then appended to the "recipients" property on
-the message, so multiple copies of a message are never sent to the same user.
-The journal recorded by the hyperdatabase on the "recipients" property then
-provides a log of when the message was sent to whom.
+When a new message is added, it is sent to all the users on the "nosy"
+list for the item that are not already on the "recipients" list of the
+message. Those users are then appended to the "recipients" property on
+the message, so multiple copies of a message are never sent to the same
+user. The journal recorded by the hyperdatabase on the "recipients"
+property then provides a log of when the message was sent to whom.
+
+If the author of the message is also in the nosy list for the item that
+the message is attached to, then the config var ``MESSAGES_TO_AUTHOR``
+is queried to determine if they get a nosy list copy of the message too.
+
+
+Mail gateway script command line
+--------------------------------
+
+Usage::
+
+ roundup-mailgw [[-C class] -S field=value]* <instance home> [method]
+
+The roundup mail gateway may be called in one of three ways:
+
+ - with an instance home as the only argument,
+ - with both an instance home and a mail spool file, or
+ - with both an instance home and a pop server account.
+
+It also supports optional -C and -S arguments that allows you to set a
+fields for a class created by the roundup-mailgw. The default class if
+not specified is msg, but the other classes: issue, file, user can also
+be used. The -S or --set options uses the same
+property=value[;property=value] notation accepted by the command line
+roundup command or the commands that can be given on the Subject line of
+an email message.
+
+It can let you set the type of the message on a per email address basis.
-If the author of the message is also in the nosy list for the item that the
-message is attached to, then the config var ``MESSAGES_TO_AUTHOR`` is queried
-to determine if they get a nosy list copy of the message too.
+PIPE:
+ In the first case, the mail gateway reads a single message from the
+ standard input and submits the message to the roundup.mailgw module.
+
+UNIX mailbox:
+ In the second case, the gateway reads all messages from the mail spool
+ file and submits each in turn to the roundup.mailgw module. The file is
+ emptied once all messages have been successfully handled. The file is
+ specified as::
+
+ mailbox /path/to/mailbox
+
+POP:
+ In the third case, the gateway reads all messages from the POP server
+ specified and submits each in turn to the roundup.mailgw module. The
+ server is specified as::
+
+ pop username:password@server
+
+ The username and password may be omitted::
+
+ pop username@server
+ pop server
+
+ are both valid. The username and/or password will be prompted for if
+ not supplied on the command-line.
+
+APOP:
+ Same as POP, but using Authenticated POP::
+
+ apop username:password@server
Command Line Tool
The basic usage is::
- Help:
- roundup-admin -h
- roundup-admin help -- this help
- roundup-admin help <command> -- command-specific help
- roundup-admin help all -- all available help
+ Usage: roundup-admin [options] [<command> <arguments>]
Options:
-i instance home -- specify the issue tracker "home directory" to administer
-u -- the user[:password] to use for commands
- -c -- when outputting lists of data, just comma-separate them
+ -d -- print full designators not just class id numbers
+ -c -- when outputting lists of data, comma-separate them.
+ Same as '-S ","'.
+ -S <string> -- when outputting lists of data, string-separate them
+ -s -- when outputting lists of data, space-separate them.
+ Same as '-S " "'.
+
+ Only one of -s, -c or -S can be specified.
- Commands:
+ Help:
+ roundup-admin -h
+ roundup-admin help -- this help
+ roundup-admin help <command> -- command-specific help
+ roundup-admin help all -- all available help
+
+ Commands:
commit
create classname property=value ...
- display designator
+ display designator[,designator]*
export [class[,class]] export_dir
find classname propname=value ...
get property designator[,designator]*
retire designator[,designator]*
rollback
security [Role name]
- set designator[,designator]* propname=value ...
+ set items property=value property=value ...
specification classname
table classname [property[,property]*]
+ Commands may be abbreviated as long as the abbreviation matches only one
+ command, e.g. l == li == lis == list.
-Commands may be abbreviated as long as the abbreviation matches only one
-command, e.g. l == li == lis == list.
All commands (except help) require a tracker specifier. This is just the
-path to the roundup tracker you're working with. A roundup tracker is where
-roundup keeps the database and configuration file that defines an issue
-tracker. It may be thought of as the issue tracker's "home directory".
-It may be specified in the environment variable ``TRACKER_HOME`` or on
-the command line as "``-i tracker``".
+path to the roundup tracker you're working with. A roundup tracker is
+where roundup keeps the database and configuration file that defines an
+issue tracker. It may be thought of as the issue tracker's "home
+directory". It may be specified in the environment variable
+``TRACKER_HOME`` or on the command line as "``-i tracker``".
-A designator is a classname and an itemid concatenated, eg. bug1, user10, ...
-Property values are represented as strings in command arguments and in the printed
-results:
+A designator is a classname and an itemid concatenated, eg. bug1,
+user10, ... Property values are represented as strings in command
+arguments and in the printed results:
- Strings are, well, strings.
- Password values will display as their encoded value.
-- Date values are printed in the full date format in the local time zone,
- and accepted in the full format or any of the partial formats explained
- below.::
+- Date values are printed in the full date format in the local time
+ zone, and accepted in the full format or any of the partial formats
+ explained below.::
Input of... Means...
- "2000-04-17.03:45" 2000-04-17.08:45:00
+ "2000-04-17.03:45" 2000-04-17.03:45:00
"2000-04-17" 2000-04-17.00:00:00
"01-25" yyyy-01-25.00:00:00
- "08-13.22:13" yyyy-08-14.03:13:00
- "11-07.09:32:43" yyyy-11-07.14:32:43
- "14:25" yyyy-mm-dd.19:25:00
- "8:47:11" yyyy-mm-dd.13:47:11
+ "08-13.22:13" yyyy-08-13.22:13:00
+ "11-07.09:32:43" yyyy-11-07.09:32:43
+ "14:25" yyyy-mm-dd.14:25:00
+ "8:47:11" yyyy-mm-dd.08:47:11
+ "2003" 2003-01-01.00:00:00
+ "2003-04" 2003-04-01.00:00:00
"." "right now"
-- Link values are printed as item designators. When given as an argument,
- item designators and key strings are both accepted.
+- Link values are printed as item designators. When given as an
+ argument, item designators and key strings are both accepted.
- Multilink values are printed as lists of item designators joined by
- commas. When given as an argument, item designators and key strings are
- both accepted; an empty string, a single item, or a list of items joined
- by commas is accepted.
+ commas. When given as an argument, item designators and key strings
+ are both accepted; an empty string, a single item, or a list of items
+ joined by commas is accepted.
When multiple items are specified to the roundup get or roundup set
-commands, the specified properties are retrieved or set on all the listed
-items. When multiple results are returned by the roundup get or roundup
-find commands, they are printed one per line (default) or joined by commas
-(with the "``-c``" option).
+commands, the specified properties are retrieved or set on all the
+listed items. When multiple results are returned by the roundup get or
+roundup find commands, they are printed one per line (default) or joined
+by commas (with the "``-c``" option).
-Where the command changes data, a login name/password is required. The login may
-be specified as either "``name``" or "``name:password``".
+Where the command changes data, a login name/password is required. The
+login may be specified as either "``name``" or "``name:password``".
- ``ROUNDUP_LOGIN`` environment variable
- the "``-u``" command-line option
-If either the name or password is not supplied, they are obtained from the
-command-line.
+If either the name or password is not supplied, they are obtained from
+the command-line.
+
+
+Using with the shell
+--------------------
+
+With version 0.6.0 or newer of roundup which supports: multiple
+designators to display and the -d, -S and -s flags.
+
+To find all messages regarding chatting issues that contain the word
+"spam", for example, you could execute the following command from the
+directory where the database dumps its files::
+
+ shell% for issue in `roundup-admin -ds find issue status=chatting`; do
+ > grep -l spam `roundup-admin -ds ' ' get messages $issue`
+ > done
+ msg23
+ msg49
+ msg50
+ msg61
+ shell%
+
+Or, using the -dc option, this can be written as a single command::
+
+ shell% grep -l spam `roundup get messages \
+ \`roundup -dc find issue status=chatting\``
+ msg23
+ msg49
+ msg50
+ msg61
+ shell%
+
+You can also display issue contents::
+
+ shell% roundup-admin display `roundup-admin -dc get messages \
+ issue3,issue1`
+ files: []
+ inreplyto: None
+ recipients: []
+ author: 1
+ date: 2003-02-16.21:23:03
+ messageid: None
+ summary: jkdskldjf
+ files: []
+ inreplyto: None
+ recipients: []
+ author: 1
+ date: 2003-02-15.01:59:11
+ messageid: None
+ summary: jlkfjadsf
+
+or status::
+
+ shell% roundup-admin get name `/tools/roundup/bin/roundup-admin \
+ -dc -i /var/roundup/sysadmin get status issue3,issue1`
+ unread
+ deferred
+or status on a single line::
+ shell% echo `roundup-admin get name \`/tools/roundup/bin/roundup-admin \
+ -dc -i /var/roundup/sysadmin get status issue3,issue1\``
+ unread deferred
+
+which is the same as::
+
+ shell% roundup-admin -s get name `/tools/roundup/bin/roundup-admin \
+ -dc -i /var/roundup/sysadmin get status issue3,issue1`
+ unread deferred
+
+Also the tautological::
+
+ shell% roundup-admin get name \
+ `roundup-admin -dc get status \`roundup-admin -dc find issue \
+ status=chatting\``
+ chatting
+ chatting
+
+Remember the roundup commands that accept multiple designators accept
+them ',' separated so using '-dc' is almost always required.
-----------------
Back to `Table of Contents`_
.. _`Table of Contents`: index.html
-
+.. _`customisation documentation`: customizing.html