Code

user-manual: update for new default --track behavior
[git.git] / config.c
index 298966f215fd0dc13dd6d414d90d792379a9c6d3..dd2de6e38e8d68d8622ad542e5c73cbcffeceeac 100644 (file)
--- a/config.c
+++ b/config.c
@@ -12,6 +12,8 @@
 static FILE *config_file;
 static const char *config_file_name;
 static int config_linenr;
+static int zlib_compression_seen;
+
 static int get_next_char(void)
 {
        int c;
@@ -231,21 +233,55 @@ static int git_parse_file(config_fn_t fn)
        die("bad config file line %d in %s", config_linenr, config_file_name);
 }
 
-int git_config_int(const char *name, const char *value)
+static unsigned long get_unit_factor(const char *end)
+{
+       if (!*end)
+               return 1;
+       else if (!strcasecmp(end, "k"))
+               return 1024;
+       else if (!strcasecmp(end, "m"))
+               return 1024 * 1024;
+       else if (!strcasecmp(end, "g"))
+               return 1024 * 1024 * 1024;
+       die("unknown unit: '%s'", end);
+}
+
+int git_parse_long(const char *value, long *ret)
+{
+       if (value && *value) {
+               char *end;
+               long val = strtol(value, &end, 0);
+               *ret = val * get_unit_factor(end);
+               return 1;
+       }
+       return 0;
+}
+
+int git_parse_ulong(const char *value, unsigned long *ret)
 {
        if (value && *value) {
                char *end;
-               int val = strtol(value, &end, 0);
-               if (!*end)
-                       return val;
-               if (!strcasecmp(end, "k"))
-                       return val * 1024;
-               if (!strcasecmp(end, "m"))
-                       return val * 1024 * 1024;
-               if (!strcasecmp(end, "g"))
-                       return val * 1024 * 1024 * 1024;
-       }
-       die("bad config value for '%s' in %s", name, config_file_name);
+               unsigned long val = strtoul(value, &end, 0);
+               *ret = val * get_unit_factor(end);
+               return 1;
+       }
+       return 0;
+}
+
+int git_config_int(const char *name, const char *value)
+{
+       long ret;
+       if (!git_parse_long(value, &ret))
+               die("bad config value for '%s' in %s", name, config_file_name);
+       return ret;
+}
+
+unsigned long git_config_ulong(const char *name, const char *value)
+{
+       unsigned long ret;
+       if (!git_parse_ulong(value, &ret))
+               die("bad config value for '%s' in %s", name, config_file_name);
+       return ret;
 }
 
 int git_config_bool(const char *name, const char *value)
@@ -269,6 +305,11 @@ int git_default_config(const char *var, const char *value)
                return 0;
        }
 
+       if (!strcmp(var, "core.quotepath")) {
+               quote_path_fully = git_config_bool(var, value);
+               return 0;
+       }
+
        if (!strcmp(var, "core.symlinks")) {
                has_symlinks = git_config_bool(var, value);
                return 0;
@@ -299,13 +340,27 @@ int git_default_config(const char *var, const char *value)
                return 0;
        }
 
-       if (!strcmp(var, "core.compression")) {
+       if (!strcmp(var, "core.loosecompression")) {
                int level = git_config_int(var, value);
                if (level == -1)
                        level = Z_DEFAULT_COMPRESSION;
                else if (level < 0 || level > Z_BEST_COMPRESSION)
                        die("bad zlib compression level %d", level);
                zlib_compression_level = level;
+               zlib_compression_seen = 1;
+               return 0;
+       }
+
+       if (!strcmp(var, "core.compression")) {
+               int level = git_config_int(var, value);
+               if (level == -1)
+                       level = Z_DEFAULT_COMPRESSION;
+               else if (level < 0 || level > Z_BEST_COMPRESSION)
+                       die("bad zlib compression level %d", level);
+               core_compression_level = level;
+               core_compression_seen = 1;
+               if (!zlib_compression_seen)
+                       zlib_compression_level = level;
                return 0;
        }
 
@@ -366,6 +421,11 @@ int git_default_config(const char *var, const char *value)
                return 0;
        }
 
+       if (!strcmp(var, "core.pager")) {
+               pager_program = xstrdup(value);
+               return 0;
+       }
+
        /* Add other config variables here and to Documentation/config.txt. */
        return 0;
 }
@@ -446,6 +506,9 @@ static int matches(const char* key, const char* value)
 
 static int store_aux(const char* key, const char* value)
 {
+       const char *ep;
+       size_t section_len;
+
        switch (store.state) {
        case KEY_SEEN:
                if (matches(key, value)) {
@@ -463,12 +526,29 @@ static int store_aux(const char* key, const char* value)
                }
                break;
        case SECTION_SEEN:
-               if (strncmp(key, store.key, store.baselen+1)) {
+               /*
+                * What we are looking for is in store.key (both
+                * section and var), and its section part is baselen
+                * long.  We found key (again, both section and var).
+                * We would want to know if this key is in the same
+                * section as what we are looking for.  We already
+                * know we are in the same section as what should
+                * hold store.key.
+                */
+               ep = strrchr(key, '.');
+               section_len = ep - key;
+
+               if ((section_len != store.baselen) ||
+                   memcmp(key, store.key, section_len+1)) {
                        store.state = SECTION_END_SEEN;
                        break;
-               } else
-                       /* do not increment matches: this is no match */
-                       store.offset[store.seen] = ftell(config_file);
+               }
+
+               /*
+                * Do not increment matches: this is no match, but we
+                * just made sure we are in the desired section.
+                */
+               store.offset[store.seen] = ftell(config_file);
                /* fallthru */
        case SECTION_END_SEEN:
        case START:
@@ -487,7 +567,7 @@ static int store_aux(const char* key, const char* value)
        return 0;
 }
 
-static int write_error()
+static int write_error(void)
 {
        fprintf(stderr, "Failed to write new configuration file\n");
 
@@ -585,7 +665,7 @@ static ssize_t find_beginning_of_line(const char* contents, size_t size,
        size_t equal_offset = size, bracket_offset = size;
        ssize_t offset;
 
-       for (offset = offset_-2; offset > 0 
+       for (offset = offset_-2; offset > 0
                        && contents[offset] != '\n'; offset--)
                switch (contents[offset]) {
                        case '=': equal_offset = offset; break;
@@ -635,7 +715,7 @@ int git_config_set_multivar(const char* key, const char* value,
        int fd = -1, in_fd;
        int ret;
        char* config_filename;
-       char* lock_file;
+       struct lock_file *lock = NULL;
        const char* last_dot = strrchr(key, '.');
 
        config_filename = getenv(CONFIG_ENVIRONMENT);
@@ -645,7 +725,6 @@ int git_config_set_multivar(const char* key, const char* value,
                        config_filename  = git_path("config");
        }
        config_filename = xstrdup(config_filename);
-       lock_file = xstrdup(mkpath("%s.lock", config_filename));
 
        /*
         * Since "key" actually contains the section name and the real
@@ -690,11 +769,12 @@ int git_config_set_multivar(const char* key, const char* value,
        store.key[i] = 0;
 
        /*
-        * The lock_file serves a purpose in addition to locking: the new
+        * The lock serves a purpose in addition to locking: the new
         * contents of .git/config will be written into it.
         */
-       fd = open(lock_file, O_WRONLY | O_CREAT | O_EXCL, 0666);
-       if (fd < 0 || adjust_shared_perm(lock_file)) {
+       lock = xcalloc(sizeof(struct lock_file), 1);
+       fd = hold_lock_file_for_update(lock, config_filename, 0);
+       if (fd < 0) {
                fprintf(stderr, "could not lock config file\n");
                free(store.key);
                ret = -1;
@@ -834,25 +914,31 @@ int git_config_set_multivar(const char* key, const char* value,
                                goto write_err_out;
 
                munmap(contents, contents_sz);
-               unlink(config_filename);
        }
 
-       if (rename(lock_file, config_filename) < 0) {
-               fprintf(stderr, "Could not rename the lock file?\n");
+       if (close(fd) || commit_lock_file(lock) < 0) {
+               fprintf(stderr, "Cannot commit config file!\n");
                ret = 4;
                goto out_free;
        }
 
+       /* fd is closed, so don't try to close it below. */
+       fd = -1;
+       /*
+        * lock is committed, so don't try to roll it back below.
+        * NOTE: Since lockfile.c keeps a linked list of all created
+        * lock_file structures, it isn't safe to free(lock).  It's
+        * better to just leave it hanging around.
+        */
+       lock = NULL;
        ret = 0;
 
 out_free:
        if (0 <= fd)
                close(fd);
+       if (lock)
+               rollback_lock_file(lock);
        free(config_filename);
-       if (lock_file) {
-               unlink(lock_file);
-               free(lock_file);
-       }
        return ret;
 
 write_err_out:
@@ -953,4 +1039,3 @@ int git_config_rename_section(const char *old_name, const char *new_name)
        free(config_filename);
        return ret;
 }
-