![[tokkee]](http://tokkee.org/images/avatar.png){kind=avatar}
index ae7f7508f8e8cffeb930c820e068ba70dabff7bd..bf0d97ef769adda0066578c7823a124385785e94 100644 (file)
--- a/INSTALL
+++ b/INSTALL
which are derived from $prefix, so "make all; make prefix=/usr
install" would not work.
+The beginning of the Makefile documents many variables that affect the way
+git is built. You can override them either from the command line, or in a
+config.mak file.
+
Alternatively you can use autoconf generated ./configure script to
set up install paths (via config.mak.autogen), so you can write instead
$ make all doc ;# as yourself
# make install install-doc install-html;# as root
+If you're willing to trade off (much) longer build time for a later
+faster git you can also do a profile feedback build with
+
+ $ make profile-all
+ # make prefix=... install
+
+This will run the complete test suite as training workload and then
+rebuild git with the generated profile feedback. This results in a git
+which is a few percent faster on CPU intensive workloads. This
+may be a good tradeoff for distribution packagers.
+
+Note that the profile feedback build stage currently generates
+a lot of additional compiler warnings.
Issues of note:
Interactive Tools package still can install "git", but you can build it
with --disable-transition option to avoid this.
- - You can use git after building but without installing if you
- wanted to. Various git commands need to find other git
- commands and scripts to do their work, so you would need to
- arrange a few environment variables to tell them that their
- friends will be found in your built source area instead of at
- their standard installation area. Something like this works
- for me:
+ - You can use git after building but without installing if you want
+ to test drive it. Simply run git found in bin-wrappers directory
+ in the build directory, or prepend that directory to your $PATH.
+ This however is less efficient than running an installed git, as
+ you always need an extra fork+exec to run any git subcommand.
+
+ It is still possible to use git without installing by setting a few
+ environment variables, which was the way this was done
+ traditionally. But using git found in bin-wrappers directory in
+ the build directory is far simpler. As a historical reference, the
+ old way went like this:
GIT_EXEC_PATH=`pwd`
PATH=`pwd`:$PATH
export GIT_EXEC_PATH PATH GITPERLLIB
- Git is reasonably self-sufficient, but does depend on a few external
- programs and libraries:
+ programs and libraries. Git can be used without most of them by adding
+ the approriate "NO_<LIBRARY>=YesPlease" to the make command line or
+ config.mak file.
- "zlib", the compression library. Git won't build without it.
- - "openssl". Unless you specify otherwise, you'll get the SHA1
- library from here.
+ - "ssh" is used to push and pull over the net.
- If you don't have openssl, you can use one of the SHA1 libraries
- that come with git (git includes the one from Mozilla, and has
- its own PowerPC and ARM optimized ones too - see the Makefile).
+ - A POSIX-compliant shell is required to run many scripts needed
+ for everyday use (e.g. "bisect", "pull").
- - libcurl library; git-http-fetch and git-fetch use them. You
- might also want the "curl" executable for debugging purposes.
- If you do not use http transfer, you are probably OK if you
- do not have them.
+ - "Perl" version 5.8 or later is needed to use some of the
+ features (e.g. preparing a partial commit using "git add -i/-p",
+ interacting with svn repositories with "git svn"). If you can
+ live without these, use NO_PERL.
- - expat library; git-http-push uses it for remote lock
- management over DAV. Similar to "curl" above, this is optional.
+ - "openssl" library is used by git-imap-send to use IMAP over SSL.
+ If you don't need it, use NO_OPENSSL.
- - "wish", the Tcl/Tk windowing shell is used in gitk to show the
- history graphically, and in git-gui.
+ By default, git uses OpenSSL for SHA1 but it will use it's own
+ library (inspired by Mozilla's) with either NO_OPENSSL or
+ BLK_SHA1. Also included is a version optimized for PowerPC
+ (PPC_SHA1).
+
+ - "libcurl" library is used by git-http-fetch and git-fetch. You
+ might also want the "curl" executable for debugging purposes.
+ If you do not use http:// or https:// repositories, you do not
+ have to have them (use NO_CURL).
- - "ssh" is used to push and pull over the net
+ - "expat" library; git-http-push uses it for remote lock
+ management over DAV. Similar to "curl" above, this is optional
+ (with NO_EXPAT).
- - "perl" and POSIX-compliant shells are needed to use most of
- the bare-bones Porcelainish scripts.
+ - "wish", the Tcl/Tk windowing shell is used in gitk to show the
+ history graphically, and in git-gui. If you don't want gitk or
+ git-gui, you can use NO_TCLTK.
- Some platform specific issues are dealt with Makefile rules,
but depending on your specific installation, you may not
Building and installing the pdf file additionally requires
dblatex. Version 0.2.7 with asciidoc >= 8.2.7 is known to work.
- The documentation is written for AsciiDoc 7, but "make
- ASCIIDOC8=YesPlease doc" will let you format with AsciiDoc 8.
-
- Alternatively, pre-formatted documentation is available in
- "html" and "man" branches of the git repository itself. For
- example, you could:
-
- $ mkdir manual && cd manual
- $ git init
- $ git fetch-pack git://git.kernel.org/pub/scm/git/git.git man html |
- while read a b
- do
- echo $a >.git/$b
- done
- $ cp .git/refs/heads/man .git/refs/heads/master
- $ git checkout
-
- to checkout the pre-built man pages. Also in this repository:
-
- $ git checkout html
-
- would instead give you a copy of what you see at:
-
- http://www.kernel.org/pub/software/scm/git/docs/
+ The documentation is written for AsciiDoc 7, but by default
+ uses some compatibility wrappers to work on AsciiDoc 8. If you have
+ AsciiDoc 7, try "make ASCIIDOC7=YesPlease".
There are also "make quick-install-doc", "make quick-install-man"
and "make quick-install-html" which install preformatted man pages
- and html documentation.
- This does not require asciidoc/xmlto, but it only works from within
- a cloned checkout of git.git with these two extra branches, and will
- not work for the maintainer for obvious chicken-and-egg reasons.
+ and html documentation. To use these build targets, you need to
+ clone two separate git-htmldocs and git-manpages repositories next
+ to the clone of git itself.
It has been reported that docbook-xsl version 1.72 and 1.73 are
buggy; 1.72 misformats manual pages for callouts, and 1.73 needs
the patch in contrib/patches/docbook-xsl-manpages-charmap.patch
+
+ Users attempting to build the documentation on Cygwin may need to ensure
+ that the /etc/xml/catalog file looks something like this:
+
+ <?xml version="1.0"?>
+ <!DOCTYPE catalog PUBLIC
+ "-//OASIS//DTD Entity Resolution XML Catalog V1.0//EN"
+ "http://www.oasis-open.org/committees/entity/release/1.0/catalog.dtd"
+ >
+ <catalog xmlns="urn:oasis:names:tc:entity:xmlns:xml:catalog">
+ <rewriteURI
+ uriStartString = "http://docbook.sourceforge.net/release/xsl/current"
+ rewritePrefix = "/usr/share/sgml/docbook/xsl-stylesheets"
+ />
+ <rewriteURI
+ uriStartString="http://www.oasis-open.org/docbook/xml/4.5"
+ rewritePrefix="/usr/share/sgml/docbook/xml-dtd-4.5"
+ />
+ </catalog>
+
+ This can be achieved with the following two xmlcatalog commands:
+
+ xmlcatalog --noout \
+ --add rewriteURI \
+ http://docbook.sourceforge.net/release/xsl/current \
+ /usr/share/sgml/docbook/xsl-stylesheets \
+ /etc/xml/catalog
+
+ xmlcatalog --noout \
+ --add rewriteURI \
+ http://www.oasis-open.org/docbook/xml/4.5/xsl/current \
+ /usr/share/sgml/docbook/xml-dtd-4.5 \
+ /etc/xml/catalog