index 4fb2f30efb1f2b2bd7d3259666a9e796b09ef4b2..b09dcc4152f6c4f975702bbeb4e372ace94eaef7 100644 (file)
The full name is occasionally useful if, for example, there ever
exists a tag and a branch with the same name.
+(Newly created refs are actually stored in the .git/refs directory,
+under the path given by their name. However, for efficiency reasons
+they may also be packed together in a single file; see
+gitlink:git-pack-refs[1]).
+
As another useful shortcut, the "HEAD" of a repository can be referred
to just using the name of that repository. So, for example, "origin"
is usually a shortcut for the HEAD branch in the repository "origin".
-------------------------
On large repositories, git depends on compression to keep the history
-information from taking up to much space on disk or in memory.
+information from taking up too much space on disk or in memory.
This compression is not performed automatically. Therefore you
should occasionally run gitlink:git-gc[1]:
a <<fast-forwards,fast forward>>. Normally this is a sign of
something wrong. However, if you are sure you know what you're
doing, you may force git-push to perform the update anyway by
-proceeding the branch name by a plus sign:
+preceding the branch name by a plus sign:
-------------------------------------------------
$ git push ssh://yourserver.com/~you/proj.git +master
$ git branch --track release origin/master
-------------------------------------------------
-These can be easily kept up to date using gitlink:git-pull[1]
+These can be easily kept up to date using gitlink:git-pull[1].
-------------------------------------------------
$ git checkout test && git pull
$ git log linux..branchname | git-shortlog
-------------------------------------------------
-To see whether it has already been merged into the test or release branches
+To see whether it has already been merged into the test or release branches,
use:
-------------------------------------------------
$ git log release..branchname
-------------------------------------------------
-(If this branch has not yet been merged you will see some log entries.
+(If this branch has not yet been merged, you will see some log entries.
If it has been merged, then there will be no output.)
Once a patch completes the great cycle (moving from test to release,
then pulled by Linus, and finally coming back into your local
-"origin/master" branch) the branch for this change is no longer needed.
+"origin/master" branch), the branch for this change is no longer needed.
You detect this when the output from:
-------------------------------------------------
git checkout $1 && git pull . origin
;;
origin)
- before=$(cat .git/refs/remotes/origin/master)
+ before=$(git rev-parse refs/remotes/origin/master)
git fetch origin
- after=$(cat .git/refs/remotes/origin/master)
+ after=$(git rev-parse refs/remotes/origin/master)
if [ $before != $after ]
then
git log $before..$after | git shortlog
exit 1
}
-if [ ! -f .git/refs/heads/"$1" ]
-then
+git show-ref -q --verify -- refs/heads/"$1" || {
echo "Can't see branch <$1>" 1>&2
usage
-fi
+}
case "$2" in
test|release)
git log test..release
fi
-for branch in `ls .git/refs/heads`
+for branch in `git show-ref --heads | sed 's|^.*/||'`
do
if [ $branch = test -o $branch = release ]
then
$ gitk origin..mywork &
-------------------------------------------------
-And browse through the list of patches in the mywork branch using gitk,
+and browse through the list of patches in the mywork branch using gitk,
applying them (possibly in a different order) to mywork-new using
cherry-pick, and possibly modifying them as you go using commit --amend.
The gitlink:git-gui[1] command may also help as it allows you to
- Git can quickly determine whether two objects are identical or not,
just by comparing names.
-- Since object names are computed the same way in ever repository, the
+- Since object names are computed the same way in every repository, the
same content stored in two repositories will always be stored under
the same name.
- Git can detect errors when it reads an object, by checking that the
"blob" objects into a directory structure. In addition, a tree object
can refer to other tree objects, thus creating a directory hierarchy.
- A <<def_commit_object,"commit" object>> ties such directory hierarchies
- together into a <<def_DAG,directed acyclic graph>> of revisions - each
+ together into a <<def_DAG,directed acyclic graph>> of revisions--each
commit contains the object name of exactly one tree designating the
directory hierarchy at the time of the commit. In addition, a commit
refers to "parent" commit objects that describe the history of how we
identical object names.
(Note: in the presence of submodules, trees may also have commits as
-entries. See gitlink:git-submodule[1] and gitlink:gitmodules.txt[1]
-for partial documentation.)
+entries. See <<submodules>> for documentation.)
Note that the files all have mode 644 or 755: git actually only pays
attention to the executable bit.
See the gitlink:git-tag[1] command to learn how to create and verify tag
objects. (Note that gitlink:git-tag[1] can also be used to create
"lightweight tags", which are not tag objects at all, but just simple
-references in .git/refs/tags/).
+references whose names begin with "refs/tags/").
+
+[[pack-files]]
+How git stores objects efficiently: pack files
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Newly created objects are initially created in a file named after the
+object's SHA1 hash (stored in .git/objects).
+
+Unfortunately this system becomes inefficient once a project has a
+lot of objects. Try this on an old project:
+
+------------------------------------------------
+$ git count-objects
+6930 objects, 47620 kilobytes
+------------------------------------------------
+
+The first number is the number of objects which are kept in
+individual files. The second is the amount of space taken up by
+those "loose" objects.
+
+You can save space and make git faster by moving these loose objects in
+to a "pack file", which stores a group of objects in an efficient
+compressed format; the details of how pack files are formatted can be
+found in link:technical/pack-format.txt[technical/pack-format.txt].
+
+To put the loose objects into a pack, just run git repack:
+
+------------------------------------------------
+$ git repack
+Generating pack...
+Done counting 6020 objects.
+Deltifying 6020 objects.
+ 100% (6020/6020) done
+Writing 6020 objects.
+ 100% (6020/6020) done
+Total 6020, written 6020 (delta 4070), reused 0 (delta 0)
+Pack pack-3e54ad29d5b2e05838c75df582c65257b8d08e1c created.
+------------------------------------------------
+
+You can then run
+
+------------------------------------------------
+$ git prune
+------------------------------------------------
+
+to remove any of the "loose" objects that are now contained in the
+pack. This will also remove any unreferenced objects (which may be
+created when, for example, you use "git reset" to remove a commit).
+You can verify that the loose objects are gone by looking at the
+.git/objects directory or by running
+
+------------------------------------------------
+$ git count-objects
+0 objects, 0 kilobytes
+------------------------------------------------
+
+Although the object files are gone, any commands that refer to those
+objects will work exactly as they did before.
+
+The gitlink:git-gc[1] command performs packing, pruning, and more for
+you, so is normally the only high-level command you need.
+
+[[dangling-objects]]
+Dangling objects
+~~~~~~~~~~~~~~~~
+
+The gitlink:git-fsck[1] command will sometimes complain about dangling
+objects. They are not a problem.
+
+The most common cause of dangling objects is that you've rebased a
+branch, or you have pulled from somebody else who rebased a branch--see
+<<cleaning-up-history>>. In that case, the old head of the original
+branch still exists, as does everything it pointed to. The branch
+pointer itself just doesn't, since you replaced it with another one.
+
+There are also other situations that cause dangling objects. For
+example, a "dangling blob" may arise because you did a "git add" of a
+file, but then, before you actually committed it and made it part of the
+bigger picture, you changed something else in that file and committed
+that *updated* thing--the old state that you added originally ends up
+not being pointed to by any commit or tree, so it's now a dangling blob
+object.
+
+Similarly, when the "recursive" merge strategy runs, and finds that
+there are criss-cross merges and thus more than one merge base (which is
+fairly unusual, but it does happen), it will generate one temporary
+midway tree (or possibly even more, if you had lots of criss-crossing
+merges and more than two merge bases) as a temporary internal merge
+base, and again, those are real objects, but the end result will not end
+up pointing to them, so they end up "dangling" in your repository.
+
+Generally, dangling objects aren't anything to worry about. They can
+even be very useful: if you screw something up, the dangling objects can
+be how you recover your old tree (say, you did a rebase, and realized
+that you really didn't want to--you can look at what dangling objects
+you have, and decide to reset your head to some old dangling state).
+
+For commits, you can just use:
+
+------------------------------------------------
+$ gitk <dangling-commit-sha-goes-here> --not --all
+------------------------------------------------
+
+This asks for all the history reachable from the given commit but not
+from any branch, tag, or other reference. If you decide it's something
+you want, you can always create a new reference to it, e.g.,
+
+------------------------------------------------
+$ git branch recovered-branch <dangling-commit-sha-goes-here>
+------------------------------------------------
+
+For blobs and trees, you can't do the same, but you can still examine
+them. You can just do
+
+------------------------------------------------
+$ git show <dangling-blob/tree-sha-goes-here>
+------------------------------------------------
+
+to show what the contents of the blob were (or, for a tree, basically
+what the "ls" for that directory was), and that may give you some idea
+of what the operation was that left that dangling object.
+
+Usually, dangling blobs and trees aren't very interesting. They're
+almost always the result of either being a half-way mergebase (the blob
+will often even have the conflict markers from a merge in it, if you
+have had conflicting merges that you fixed up by hand), or simply
+because you interrupted a "git fetch" with ^C or something like that,
+leaving _some_ of the new objects in the object database, but just
+dangling and useless.
+
+Anyway, once you are sure that you're not interested in any dangling
+state, you can just prune all unreachable objects:
+
+------------------------------------------------
+$ git prune
+------------------------------------------------
+
+and they'll be gone. But you should only run "git prune" on a quiescent
+repository--it's kind of like doing a filesystem fsck recovery: you
+don't want to do that while the filesystem is mounted.
+(The same is true of "git-fsck" itself, btw, but since
+git-fsck never actually *changes* the repository, it just reports
+on what it found, git-fsck itself is never "dangerous" to run.
+Running it while somebody is actually changing the repository can cause
+confusing and scary messages, but it won't actually do anything bad. In
+contrast, running "git prune" while somebody is actively changing the
+repository is a *BAD* idea).
[[the-index]]
The index
If you blow the index away entirely, you generally haven't lost any
information as long as you have the name of the tree that it described.
+[[submodules]]
+Submodules
+==========
+
+Large projects are often composed of smaller, self-contained modules. For
+example, an embedded Linux distribution's source tree would include every
+piece of software in the distribution with some local modifications; a movie
+player might need to build against a specific, known-working version of a
+decompression library; several independent programs might all share the same
+build scripts.
+
+With centralized revision control systems this is often accomplished by
+including every module in one single repository. Developers can check out
+all modules or only the modules they need to work with. They can even modify
+files across several modules in a single commit while moving things around
+or updating APIs and translations.
+
+Git does not allow partial checkouts, so duplicating this approach in Git
+would force developers to keep a local copy of modules they are not
+interested in touching. Commits in an enormous checkout would be slower
+than you'd expect as Git would have to scan every directory for changes.
+If modules have a lot of local history, clones would take forever.
+
+On the plus side, distributed revision control systems can much better
+integrate with external sources. In a centralized model, a single arbitrary
+snapshot of the external project is exported from its own revision control
+and then imported into the local revision control on a vendor branch. All
+the history is hidden. With distributed revision control you can clone the
+entire external history and much more easily follow development and re-merge
+local changes.
+
+Git's submodule support allows a repository to contain, as a subdirectory, a
+checkout of an external project. Submodules maintain their own identity;
+the submodule support just stores the submodule repository location and
+commit ID, so other developers who clone the containing project
+("superproject") can easily clone all the submodules at the same revision.
+Partial checkouts of the superproject are possible: you can tell Git to
+clone none, some or all of the submodules.
+
+The gitlink:git-submodule[1] command is available since Git 1.5.3. Users
+with Git 1.5.2 can look up the submodule commits in the repository and
+manually check them out; earlier versions won't recognize the submodules at
+all.
+
+To see how submodule support works, create (for example) four example
+repositories that can be used later as a submodule:
+
+-------------------------------------------------
+$ mkdir ~/git
+$ cd ~/git
+$ for i in a b c d
+do
+ mkdir $i
+ cd $i
+ git init
+ echo "module $i" > $i.txt
+ git add $i.txt
+ git commit -m "Initial commit, submodule $i"
+ cd ..
+done
+-------------------------------------------------
+
+Now create the superproject and add all the submodules:
+
+-------------------------------------------------
+$ mkdir super
+$ cd super
+$ git init
+$ for i in a b c d
+do
+ git submodule add ~/git/$i
+done
+-------------------------------------------------
+
+NOTE: Do not use local URLs here if you plan to publish your superproject!
+
+See what files `git submodule` created:
+
+-------------------------------------------------
+$ ls -a
+. .. .git .gitmodules a b c d
+-------------------------------------------------
+
+The `git submodule add` command does a couple of things:
+
+- It clones the submodule under the current directory and by default checks out
+ the master branch.
+- It adds the submodule's clone path to the gitlink:gitmodules[5] file and
+ adds this file to the index, ready to be committed.
+- It adds the submodule's current commit ID to the index, ready to be
+ committed.
+
+Commit the superproject:
+
+-------------------------------------------------
+$ git commit -m "Add submodules a, b, c and d."
+-------------------------------------------------
+
+Now clone the superproject:
+
+-------------------------------------------------
+$ cd ..
+$ git clone super cloned
+$ cd cloned
+-------------------------------------------------
+
+The submodule directories are there, but they're empty:
+
+-------------------------------------------------
+$ ls -a a
+. ..
+$ git submodule status
+-d266b9873ad50488163457f025db7cdd9683d88b a
+-e81d457da15309b4fef4249aba9b50187999670d b
+-c1536a972b9affea0f16e0680ba87332dc059146 c
+-d96249ff5d57de5de093e6baff9e0aafa5276a74 d
+-------------------------------------------------
+
+NOTE: The commit object names shown above would be different for you, but they
+should match the HEAD commit object names of your repositories. You can check
+it by running `git ls-remote ../a`.
+
+Pulling down the submodules is a two-step process. First run `git submodule
+init` to add the submodule repository URLs to `.git/config`:
+
+-------------------------------------------------
+$ git submodule init
+-------------------------------------------------
+
+Now use `git submodule update` to clone the repositories and check out the
+commits specified in the superproject:
+
+-------------------------------------------------
+$ git submodule update
+$ cd a
+$ ls -a
+. .. .git a.txt
+-------------------------------------------------
+
+One major difference between `git submodule update` and `git submodule add` is
+that `git submodule update` checks out a specific commit, rather than the tip
+of a branch. It's like checking out a tag: the head is detached, so you're not
+working on a branch.
+
+-------------------------------------------------
+$ git branch
+* (no branch)
+ master
+-------------------------------------------------
+
+If you want to make a change within a submodule and you have a detached head,
+then you should create or checkout a branch, make your changes, publish the
+change within the submodule, and then update the superproject to reference the
+new commit:
+
+-------------------------------------------------
+$ git checkout master
+-------------------------------------------------
+
+or
+
+-------------------------------------------------
+$ git checkout -b fix-up
+-------------------------------------------------
+
+then
+
+-------------------------------------------------
+$ echo "adding a line again" >> a.txt
+$ git commit -a -m "Updated the submodule from within the superproject."
+$ git push
+$ cd ..
+$ git diff
+diff --git a/a b/a
+index d266b98..261dfac 160000
+--- a/a
++++ b/a
+@@ -1 +1 @@
+-Subproject commit d266b9873ad50488163457f025db7cdd9683d88b
++Subproject commit 261dfac35cb99d380eb966e102c1197139f7fa24
+$ git add a
+$ git commit -m "Updated submodule a."
+$ git push
+-------------------------------------------------
+
+You have to run `git submodule update` after `git pull` if you want to update
+submodules, too.
+
+Pitfalls with submodules
+------------------------
+
+Always publish the submodule change before publishing the change to the
+superproject that references it. If you forget to publish the submodule change,
+others won't be able to clone the repository:
+
+-------------------------------------------------
+$ cd ~/git/super/a
+$ echo i added another line to this file >> a.txt
+$ git commit -a -m "doing it wrong this time"
+$ cd ..
+$ git add a
+$ git commit -m "Updated submodule a again."
+$ git push
+$ cd ~/git/cloned
+$ git pull
+$ git submodule update
+error: pathspec '261dfac35cb99d380eb966e102c1197139f7fa24' did not match any file(s) known to git.
+Did you forget to 'git add'?
+Unable to checkout '261dfac35cb99d380eb966e102c1197139f7fa24' in submodule path 'a'
+-------------------------------------------------
+
+You also should not rewind branches in a submodule beyond commits that were
+ever recorded in any superproject.
+
+It's not safe to run `git submodule update` if you've made and committed
+changes within a submodule without checking out a branch first. They will be
+silently overwritten:
+
+-------------------------------------------------
+$ cat a.txt
+module a
+$ echo line added from private2 >> a.txt
+$ git commit -a -m "line added inside private2"
+$ cd ..
+$ git submodule update
+Submodule path 'a': checked out 'd266b9873ad50488163457f025db7cdd9683d88b'
+$ cd a
+$ cat a.txt
+module a
+-------------------------------------------------
+
+NOTE: The changes are still visible in the submodule's reflog.
+
+This is not the case if you did not commit your changes.
+
[[low-level-operations]]
Low-level git operations
========================
------------
High-level operations such as gitlink:git-commit[1],
-gitlink:git-checkout[1] and git-reset[1] work by moving data between the
-working tree, the index, and the object database. Git provides
-low-level operations which perform each of these steps individually.
+gitlink:git-checkout[1] and gitlink:git-reset[1] work by moving data
+between the working tree, the index, and the object database. Git
+provides low-level operations which perform each of these steps
+individually.
Generally, all "git" operations work on the index file. Some operations
work *purely* on the index file (showing the current state of the
$ git write-tree
-------------------------------------------------
-that doesn't come with any options - it will just write out the
+that doesn't come with any options--it will just write out the
current index into the set of tree objects that describe that state,
and it will return the name of the resulting top-level tree. You can
use that tree to re-generate the index at any time by going in the
~~~~~~~~~~~~~~~~~~~~~~~~
You read a "tree" file from the object database, and use that to
-populate (and overwrite - don't do this if your index contains any
+populate (and overwrite--don't do this if your index contains any
unsaved state that you might want to restore later!) your current
index. Normal operation is just
To commit a tree you have instantiated with "git-write-tree", you'd
create a "commit" object that refers to that tree and the history
-behind it - most notably the "parent" commits that preceded it in
+behind it--most notably the "parent" commits that preceded it in
history.
Normally a "commit" has one parent: the previous state of the tree
tree, aka the common tree, and the two "result" trees, aka the branches
you want to merge), you do a "merge" read into the index. This will
complain if it has to throw away your old index contents, so you should
-make sure that you've committed those - in fact you would normally
+make sure that you've committed those--in fact you would normally
always do a merge against your last commit (which should thus match what
you have in your current index anyway).
---------------------------------
Sadly, many merges aren't trivial. If there are files that have
-been added.moved or removed, or if both branches have modified the
+been added, moved or removed, or if both branches have modified the
same file, you will be left with an index tree that contains "merge
entries" in it. Such an index tree can 'NOT' be written out to a tree
object, and you will have to resolve any such merge clashes using
and that is what higher level `git merge -s resolve` is implemented with.
-[[pack-files]]
-How git stores objects efficiently: pack files
-----------------------------------------------
-
-We've seen how git stores each object in a file named after the
-object's SHA1 hash.
-
-Unfortunately this system becomes inefficient once a project has a
-lot of objects. Try this on an old project:
-
-------------------------------------------------
-$ git count-objects
-6930 objects, 47620 kilobytes
-------------------------------------------------
-
-The first number is the number of objects which are kept in
-individual files. The second is the amount of space taken up by
-those "loose" objects.
-
-You can save space and make git faster by moving these loose objects in
-to a "pack file", which stores a group of objects in an efficient
-compressed format; the details of how pack files are formatted can be
-found in link:technical/pack-format.txt[technical/pack-format.txt].
-
-To put the loose objects into a pack, just run git repack:
-
-------------------------------------------------
-$ git repack
-Generating pack...
-Done counting 6020 objects.
-Deltifying 6020 objects.
- 100% (6020/6020) done
-Writing 6020 objects.
- 100% (6020/6020) done
-Total 6020, written 6020 (delta 4070), reused 0 (delta 0)
-Pack pack-3e54ad29d5b2e05838c75df582c65257b8d08e1c created.
-------------------------------------------------
-
-You can then run
-
-------------------------------------------------
-$ git prune
-------------------------------------------------
-
-to remove any of the "loose" objects that are now contained in the
-pack. This will also remove any unreferenced objects (which may be
-created when, for example, you use "git reset" to remove a commit).
-You can verify that the loose objects are gone by looking at the
-.git/objects directory or by running
-
-------------------------------------------------
-$ git count-objects
-0 objects, 0 kilobytes
-------------------------------------------------
-
-Although the object files are gone, any commands that refer to those
-objects will work exactly as they did before.
-
-The gitlink:git-gc[1] command performs packing, pruning, and more for
-you, so is normally the only high-level command you need.
-
-[[dangling-objects]]
-Dangling objects
-----------------
-
-The gitlink:git-fsck[1] command will sometimes complain about dangling
-objects. They are not a problem.
-
-The most common cause of dangling objects is that you've rebased a
-branch, or you have pulled from somebody else who rebased a branch--see
-<<cleaning-up-history>>. In that case, the old head of the original
-branch still exists, as does everything it pointed to. The branch
-pointer itself just doesn't, since you replaced it with another one.
-
-There are also other situations that cause dangling objects. For
-example, a "dangling blob" may arise because you did a "git add" of a
-file, but then, before you actually committed it and made it part of the
-bigger picture, you changed something else in that file and committed
-that *updated* thing - the old state that you added originally ends up
-not being pointed to by any commit or tree, so it's now a dangling blob
-object.
-
-Similarly, when the "recursive" merge strategy runs, and finds that
-there are criss-cross merges and thus more than one merge base (which is
-fairly unusual, but it does happen), it will generate one temporary
-midway tree (or possibly even more, if you had lots of criss-crossing
-merges and more than two merge bases) as a temporary internal merge
-base, and again, those are real objects, but the end result will not end
-up pointing to them, so they end up "dangling" in your repository.
-
-Generally, dangling objects aren't anything to worry about. They can
-even be very useful: if you screw something up, the dangling objects can
-be how you recover your old tree (say, you did a rebase, and realized
-that you really didn't want to - you can look at what dangling objects
-you have, and decide to reset your head to some old dangling state).
-
-For commits, you can just use:
-
-------------------------------------------------
-$ gitk <dangling-commit-sha-goes-here> --not --all
-------------------------------------------------
-
-This asks for all the history reachable from the given commit but not
-from any branch, tag, or other reference. If you decide it's something
-you want, you can always create a new reference to it, e.g.,
-
-------------------------------------------------
-$ git branch recovered-branch <dangling-commit-sha-goes-here>
-------------------------------------------------
-
-For blobs and trees, you can't do the same, but you can still examine
-them. You can just do
-
-------------------------------------------------
-$ git show <dangling-blob/tree-sha-goes-here>
-------------------------------------------------
-
-to show what the contents of the blob were (or, for a tree, basically
-what the "ls" for that directory was), and that may give you some idea
-of what the operation was that left that dangling object.
-
-Usually, dangling blobs and trees aren't very interesting. They're
-almost always the result of either being a half-way mergebase (the blob
-will often even have the conflict markers from a merge in it, if you
-have had conflicting merges that you fixed up by hand), or simply
-because you interrupted a "git fetch" with ^C or something like that,
-leaving _some_ of the new objects in the object database, but just
-dangling and useless.
-
-Anyway, once you are sure that you're not interested in any dangling
-state, you can just prune all unreachable objects:
-
-------------------------------------------------
-$ git prune
-------------------------------------------------
-
-and they'll be gone. But you should only run "git prune" on a quiescent
-repository - it's kind of like doing a filesystem fsck recovery: you
-don't want to do that while the filesystem is mounted.
-
-(The same is true of "git-fsck" itself, btw - but since
-git-fsck never actually *changes* the repository, it just reports
-on what it found, git-fsck itself is never "dangerous" to run.
-Running it while somebody is actually changing the repository can cause
-confusing and scary messages, but it won't actually do anything bad. In
-contrast, running "git prune" while somebody is actively changing the
-repository is a *BAD* idea).
-
[[hacking-git]]
Hacking git
===========
- `get_sha1()` returns 0 on _success_. This might surprise some new
Git hackers, but there is a long tradition in UNIX to return different
- negative numbers in case of different errors -- and 0 on success.
+ negative numbers in case of different errors--and 0 on success.
- the variable `sha1` in the function signature of `get_sha1()` is `unsigned
char \*`, but is actually expected to be a pointer to `unsigned
$ git branch -d new # delete branch "new"
-----------------------------------------------
-Instead of basing new branch on current HEAD (the default), use:
+Instead of basing a new branch on current HEAD (the default), use:
-----------------------------------------------
$ git branch new test # branch named "test"
This is a work in progress.
The basic requirements:
- - It must be readable in order, from beginning to end, by
- someone intelligent with a basic grasp of the UNIX
- command line, but without any special knowledge of git. If
- necessary, any other prerequisites should be specifically
- mentioned as they arise.
- - Whenever possible, section headings should clearly describe
- the task they explain how to do, in language that requires
- no more knowledge than necessary: for example, "importing
- patches into a project" rather than "the git-am command"
+
+- It must be readable in order, from beginning to end, by someone
+ intelligent with a basic grasp of the UNIX command line, but without
+ any special knowledge of git. If necessary, any other prerequisites
+ should be specifically mentioned as they arise.
+- Whenever possible, section headings should clearly describe the task
+ they explain how to do, in language that requires no more knowledge
+ than necessary: for example, "importing patches into a project" rather
+ than "the git-am command"
Think about how to create a clear chapter dependency graph that will
allow people to get to important topics without necessarily reading
everything in between.
Scan Documentation/ for other stuff left out; in particular:
- howto's
- some of technical/?
- hooks
- list of commands in gitlink:git[1]
+
+- howto's
+- some of technical/?
+- hooks
+- list of commands in gitlink:git[1]
Scan email archives for other stuff left out