index ee6822a85df9965901403e99d353fc3c0e1a9eed..6d7cf6d51fc5c2511c8ed411ed36aefd93d4ad60 100644 (file)
--parents::
- Print the parents of the commit.
+ Print the parents of the commit. Also enables parent
+ rewriting, see 'History Simplification' below.
--children::
- Print the children of the commit.
+ Print the children of the commit. Also enables parent
+ rewriting, see 'History Simplification' below.
ifdef::git-rev-list[]
--timestamp::
o---x---a---a branch A
-----------------------------------------------------------------------
+
-you would get an output line this:
+you would get an output like this:
+
-----------------------------------------------------------------------
$ git rev-list --left-right --boundary --pretty=oneline A...B
This implies the '--topo-order' option by default, but the
'--date-order' option may also be specified.
+ifndef::git-rev-list[]
Diff Formatting
~~~~~~~~~~~~~~~
-t::
Show the tree objects in the diff output. This implies '-r'.
+endif::git-rev-list[]
Commit Limiting
~~~~~~~~~~~~~~~
Limit the commits output to ones with log message that
matches the specified pattern (regular expression).
+--all-match::
+ Limit the commits output to ones that match all given --grep,
+ --author and --committer instead of ones that match at least one.
+
-i::
--regexp-ignore-case::
Stop when a given path disappears from the tree.
---full-history::
-
- Show also parts of history irrelevant to current state of given
- paths. This turns off history simplification, which removed merges
- which didn't change anything at all at some child. It will still actually
- simplify away merges that didn't change anything at all into either
- child.
-
---simplify-merges::
-
- Simplify away commits that did not change the given paths, similar
- to `--full-history`, and further remove merges none of whose
- parent history changes the given paths.
-
--no-merges::
Do not print commits with more than one parent.
this causes the output to have two extra lines of information
taken from the reflog. By default, 'commit@\{Nth}' notation is
used in the output. When the starting commit is specified as
-'commit@{now}', output also uses 'commit@\{timestamp}' notation
+'commit@\{now}', output also uses 'commit@\{timestamp}' notation
instead. Under '\--pretty=oneline', the commit message is
prefixed with this information on the same line.
-
-Cannot be combined with '\--reverse'.
+This option cannot be combined with '\--reverse'.
See also linkgit:git-reflog[1].
--merge::
Output uninteresting commits at the boundary, which are usually
not shown.
+--
+
+History Simplification
+~~~~~~~~~~~~~~~~~~~~~~
+
+Sometimes you are only interested in parts of the history, for example the
+commits modifying a particular <path>. But there are two parts of
+'History Simplification', one part is selecting the commits and the other
+is how to do it, as there are various strategies to simplify the history.
+
+The following options select the commits to be shown:
+
+<paths>::
+
+ Commits modifying the given <paths> are selected.
+
+--simplify-by-decoration::
+
+ Commits that are referred by some branch or tag are selected.
+
+Note that extra commits can be shown to give a meaningful history.
+
+The following options affect the way the simplification is performed:
+
+Default mode::
+
+ Simplifies the history to the simplest history explaining the
+ final state of the tree. Simplest because it prunes some side
+ branches if the end result is the same (i.e. merging branches
+ with the same content)
+
+--full-history::
+
+ As the default mode but does not prune some history.
+
+--dense::
+
+ Only the selected commits are shown, plus some to have a
+ meaningful history.
+
+--sparse::
+
+ All commits in the simplified history are shown.
+
+--simplify-merges::
+
+ Additional option to '--full-history' to remove some needless
+ merges from the resulting history, as there are no selected
+ commits contributing to this merge.
+
+A more detailed explanation follows.
+
+Suppose you specified `foo` as the <paths>. We shall call commits
+that modify `foo` !TREESAME, and the rest TREESAME. (In a diff
+filtered for `foo`, they look different and equal, respectively.)
+
+In the following, we will always refer to the same example history to
+illustrate the differences between simplification settings. We assume
+that you are filtering for a file `foo` in this commit graph:
+-----------------------------------------------------------------------
+ .-A---M---N---O---P
+ / / / / /
+ I B C D E
+ \ / / / /
+ `-------------'
+-----------------------------------------------------------------------
+The horizontal line of history A--P is taken to be the first parent of
+each merge. The commits are:
+
+* `I` is the initial commit, in which `foo` exists with contents
+ "asdf", and a file `quux` exists with contents "quux". Initial
+ commits are compared to an empty tree, so `I` is !TREESAME.
+
+* In `A`, `foo` contains just "foo".
+
+* `B` contains the same change as `A`. Its merge `M` is trivial and
+ hence TREESAME to all parents.
+
+* `C` does not change `foo`, but its merge `N` changes it to "foobar",
+ so it is not TREESAME to any parent.
+
+* `D` sets `foo` to "baz". Its merge `O` combines the strings from
+ `N` and `D` to "foobarbaz"; i.e., it is not TREESAME to any parent.
+
+* `E` changes `quux` to "xyzzy", and its merge `P` combines the
+ strings to "quux xyzzy". Despite appearing interesting, `P` is
+ TREESAME to all parents.
+
+'rev-list' walks backwards through history, including or excluding
+commits based on whether '\--full-history' and/or parent rewriting
+(via '\--parents' or '\--children') are used. The following settings
+are available.
+
+Default mode::
+
+ Commits are included if they are not TREESAME to any parent
+ (though this can be changed, see '\--sparse' below). If the
+ commit was a merge, and it was TREESAME to one parent, follow
+ only that parent. (Even if there are several TREESAME
+ parents, follow only one of them.) Otherwise, follow all
+ parents.
++
+This results in:
++
+-----------------------------------------------------------------------
+ .-A---N---O
+ / /
+ I---------D
+-----------------------------------------------------------------------
++
+Note how the rule to only follow the TREESAME parent, if one is
+available, removed `B` from consideration entirely. `C` was
+considered via `N`, but is TREESAME. Root commits are compared to an
+empty tree, so `I` is !TREESAME.
++
+Parent/child relations are only visible with --parents, but that does
+not affect the commits selected in default mode, so we have shown the
+parent lines.
+
+--full-history without parent rewriting::
+
+ This mode differs from the default in one point: always follow
+ all parents of a merge, even if it is TREESAME to one of them.
+ Even if more than one side of the merge has commits that are
+ included, this does not imply that the merge itself is! In
+ the example, we get
++
+-----------------------------------------------------------------------
+ I A B N D O
+-----------------------------------------------------------------------
++
+`P` and `M` were excluded because they are TREESAME to a parent. `E`,
+`C` and `B` were all walked, but only `B` was !TREESAME, so the others
+do not appear.
++
+Note that without parent rewriting, it is not really possible to talk
+about the parent/child relationships between the commits, so we show
+them disconnected.
+
+--full-history with parent rewriting::
+
+ Ordinary commits are only included if they are !TREESAME
+ (though this can be changed, see '\--sparse' below).
++
+Merges are always included. However, their parent list is rewritten:
+Along each parent, prune away commits that are not included
+themselves. This results in
++
+-----------------------------------------------------------------------
+ .-A---M---N---O---P
+ / / / / /
+ I B / D /
+ \ / / / /
+ `-------------'
+-----------------------------------------------------------------------
++
+Compare to '\--full-history' without rewriting above. Note that `E`
+was pruned away because it is TREESAME, but the parent list of P was
+rewritten to contain `E`'s parent `I`. The same happened for `C` and
+`N`. Note also that `P` was included despite being TREESAME.
+
+In addition to the above settings, you can change whether TREESAME
+affects inclusion:
+
--dense::
+
+ Commits that are walked are included if they are not TREESAME
+ to any parent.
+
--sparse::
-When optional paths are given, the default behaviour ('--dense') is to
-only output commits that changes at least one of them, and also ignore
-merges that do not touch the given paths.
+ All commits that are walked are included.
++
+Note that without '\--full-history', this still simplifies merges: if
+one of the parents is TREESAME, we follow only that one, so the other
+sides of the merge are never walked.
+
+Finally, there is a fourth simplification mode available:
-Use the '--sparse' flag to makes the command output all eligible commits
-(still subject to count and age limitation), but apply merge
-simplification nevertheless.
+--simplify-merges::
+
+ First, build a history graph in the same way that
+ '\--full-history' with parent rewriting does (see above).
++
+Then simplify each commit `C` to its replacement `C'` in the final
+history according to the following rules:
++
+--
+* Set `C'` to `C`.
++
+* Replace each parent `P` of `C'` with its simplification `P'`. In
+ the process, drop parents that are ancestors of other parents, and
+ remove duplicates.
++
+* If after this parent rewriting, `C'` is a root or merge commit (has
+ zero or >1 parents), a boundary commit, or !TREESAME, it remains.
+ Otherwise, it is replaced with its only parent.
+--
++
+The effect of this is best shown by way of comparing to
+'\--full-history' with parent rewriting. The example turns into:
++
+-----------------------------------------------------------------------
+ .-A---M---N---O
+ / / /
+ I B D
+ \ / /
+ `---------'
+-----------------------------------------------------------------------
++
+Note the major differences in `N` and `P` over '\--full-history':
++
+--
+* `N`'s parent list had `I` removed, because it is an ancestor of the
+ other parent `M`. Still, `N` remained because it is !TREESAME.
++
+* `P`'s parent list similarly had `I` removed. `P` was then
+ removed completely, because it had one parent and is TREESAME.
+--
+
+The '\--simplify-by-decoration' option allows you to view only the
+big picture of the topology of the history, by omitting commits
+that are not referenced by tags. Commits are marked as !TREESAME
+(in other words, kept after history simplification rules described
+above) if (1) they are referenced by tags, or (2) they change the
+contents of the paths given on the command line. All other
+commits are marked as TREESAME (subject to be simplified away).
ifdef::git-rev-list[]
+Bisection Helpers
+~~~~~~~~~~~~~~~~~
+
--bisect::
Limit output to the one commit object which is roughly halfway between
the included and excluded commits. Thus, if
-----------------------------------------------------------------------
- $ git-rev-list --bisect foo ^bar ^baz
+ $ git rev-list --bisect foo ^bar ^baz
-----------------------------------------------------------------------
outputs 'midpoint', the output of the two commands
-----------------------------------------------------------------------
- $ git-rev-list foo ^midpoint
- $ git-rev-list midpoint ^bar ^baz
+ $ git rev-list foo ^midpoint
+ $ git rev-list midpoint ^bar ^baz
-----------------------------------------------------------------------
would be of roughly the same length. Finding the change which
`--bisect-vars` had been used alone.
endif::git-rev-list[]
---
Commit Ordering
~~~~~~~~~~~~~~~