![[tokkee]](http://tokkee.org/images/avatar.png){kind=avatar}
index e2437f30ca1314dc00a55f72c4e2a325cc75c7b6..327233c85b4cb9af07b8866b055a83d25b21b569 100644 (file)
SYNOPSIS
--------
-'git send-email' [options] <file|directory> [... file|directory]
-
+[verse]
+'git send-email' [options] <file|directory|rev-list options>...
DESCRIPTION
-----------
Takes the patches given on the command line and emails them out.
+Patches can be specified as files, directories (which will send all
+files in the directory), or directly as a revision list. In the
+last case, any format accepted by linkgit:git-format-patch[1] can
+be passed to git send-email.
The header of the email is configurable by command line options. If not
specified on the command line, the user will be prompted with a ReadLine
enabled interface to provide the necessary information.
+There are two formats accepted for patch files:
+
+1. mbox format files
++
+This is what linkgit:git-format-patch[1] generates. Most headers and MIME
+formatting are ignored.
+
+2. The original format used by Greg Kroah-Hartman's 'send_lots_of_email.pl'
+script
++
+This format expects the first line of the file to contain the "Cc:" value
+and the "Subject:" of the message as the second line.
+
+
OPTIONS
-------
-The options available are:
---bcc::
- Specify a "Bcc:" value for each email.
+Composing
+~~~~~~~~~
+
+--annotate::
+ Review and edit each patch you're about to send. See the
+ CONFIGURATION section for 'sendemail.multiedit'.
+
+--bcc=<address>::
+ Specify a "Bcc:" value for each email. Default is the value of
+ 'sendemail.bcc'.
+
The --bcc option must be repeated for each user you want on the bcc list.
---cc::
+--cc=<address>::
Specify a starting "Cc:" value for each email.
+ Default is the value of 'sendemail.cc'.
+
The --cc option must be repeated for each user you want on the cc list.
---cc-cmd::
- Specify a command to execute once per patch file which
- should generate patch file specific "Cc:" entries.
- Output of this command must be single email address per line.
- Default is the value of 'sendemail.cccmd' configuration value.
-
---chain-reply-to::
---no-chain-reply-to::
- If this is set, each email will be sent as a reply to the previous
- email sent. If disabled with "--no-chain-reply-to", all emails after
- the first will be sent as replies to the first email sent. When using
- this, it is recommended that the first file given be an overview of the
- entire patch series.
- Default is the value of the 'sendemail.chainreplyto' configuration
- value; if that is unspecified, default to --chain-reply-to.
-
--compose::
- Use $GIT_EDITOR, core.editor, $VISUAL, or $EDITOR to edit an
- introductory message for the patch series.
-
---from::
- Specify the sender of the emails. This will default to
- the value GIT_COMMITTER_IDENT, as returned by "git var -l".
- The user will still be prompted to confirm this entry.
-
---in-reply-to::
- Specify the contents of the first In-Reply-To header.
- Subsequent emails will refer to the previous email
- instead of this if --chain-reply-to is set (the default)
+ Invoke a text editor (see GIT_EDITOR in linkgit:git-var[1])
+ to edit an introductory message for the patch series.
++
+When '--compose' is used, git send-email will use the From, Subject, and
+In-Reply-To headers specified in the message. If the body of the message
+(what you type after the headers and a blank line) only contains blank
+(or GIT: prefixed) lines the summary won't be sent, but From, Subject,
+and In-Reply-To headers will be used unless they are removed.
++
+Missing From or In-Reply-To headers will be prompted for.
++
+See the CONFIGURATION section for 'sendemail.multiedit'.
+
+--from=<address>::
+ Specify the sender of the emails. If not specified on the command line,
+ the value of the 'sendemail.from' configuration option is used. If
+ neither the command line option nor 'sendemail.from' are set, then the
+ user will be prompted for the value. The default for the prompt will be
+ the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not
+ set, as returned by "git var -l".
+
+--in-reply-to=<identifier>::
+ Make the first mail (or all the mails with `--no-thread`) appear as a
+ reply to the given Message-Id, which avoids breaking threads to
+ provide a new patch series.
+ The second and subsequent emails will be sent as replies according to
+ the `--[no]-chain-reply-to` setting.
++
+So for example when `--thread` and `--no-chain-reply-to` are specified, the
+second and subsequent patches will be replies to the first one like in the
+illustration below where `[PATCH v2 0/3]` is in reply to `[PATCH 0/2]`:
++
+ [PATCH 0/2] Here is what I did...
+ [PATCH 1/2] Clean up and tests
+ [PATCH 2/2] Implementation
+ [PATCH v2 0/3] Here is a reroll
+ [PATCH v2 1/3] Clean up
+ [PATCH v2 2/3] New tests
+ [PATCH v2 3/3] Implementation
++
+Only necessary if --compose is also set. If --compose
+is not set, this will be prompted for.
+
+--subject=<string>::
+ Specify the initial subject of the email thread.
Only necessary if --compose is also set. If --compose
is not set, this will be prompted for.
---signed-off-by-cc::
---no-signed-off-by-cc::
- If this is set, add emails found in Signed-off-by: or Cc: lines to the
- cc list.
- Default is the value of 'sendemail.signedoffcc' configuration value;
- if that is unspecified, default to --signed-off-by-cc.
+--to=<address>::
+ Specify the primary recipient of the emails generated. Generally, this
+ will be the upstream maintainer of the project involved. Default is the
+ value of the 'sendemail.to' configuration value; if that is unspecified,
+ and --to-cmd is not specified, this will be prompted for.
++
+The --to option must be repeated for each user you want on the to list.
---quiet::
- Make git-send-email less verbose. One line per email should be
- all that is output.
+--8bit-encoding=<encoding>::
+ When encountering a non-ASCII message or subject that does not
+ declare its encoding, add headers/quoting to indicate it is
+ encoded in <encoding>. Default is the value of the
+ 'sendemail.assume8bitEncoding'; if that is unspecified, this
+ will be prompted for if any non-ASCII files are encountered.
++
+Note that no attempts whatsoever are made to validate the encoding.
---identity::
- A configuration identity. When given, causes values in the
- 'sendemail.<identity>' subsection to take precedence over
- values in the 'sendemail' section. The default identity is
- the value of 'sendemail.identity'.
---smtp-server::
+Sending
+~~~~~~~
+
+--envelope-sender=<address>::
+ Specify the envelope sender used to send the emails.
+ This is useful if your default address is not the address that is
+ subscribed to a list. In order to use the 'From' address, set the
+ value to "auto". If you use the sendmail binary, you must have
+ suitable privileges for the -f parameter. Default is the value of the
+ 'sendemail.envelopesender' configuration variable; if that is
+ unspecified, choosing the envelope sender is left to your MTA.
+
+--smtp-encryption=<encryption>::
+ Specify the encryption to use, either 'ssl' or 'tls'. Any other
+ value reverts to plain SMTP. Default is the value of
+ 'sendemail.smtpencryption'.
+
+--smtp-domain=<FQDN>::
+ Specifies the Fully Qualified Domain Name (FQDN) used in the
+ HELO/EHLO command to the SMTP server. Some servers require the
+ FQDN to match your IP address. If not set, git send-email attempts
+ to determine your FQDN automatically. Default is the value of
+ 'sendemail.smtpdomain'.
+
+--smtp-pass[=<password>]::
+ Password for SMTP-AUTH. The argument is optional: If no
+ argument is specified, then the empty string is used as
+ the password. Default is the value of 'sendemail.smtppass',
+ however '--smtp-pass' always overrides this value.
++
+Furthermore, passwords need not be specified in configuration files
+or on the command line. If a username has been specified (with
+'--smtp-user' or a 'sendemail.smtpuser'), but no password has been
+specified (with '--smtp-pass' or 'sendemail.smtppass'), then the
+user is prompted for a password while the input is masked for privacy.
+
+--smtp-server=<host>::
If set, specifies the outgoing SMTP server to use (e.g.
`smtp.example.com` or a raw IP address). Alternatively it can
specify a full pathname of a sendmail-like program instead;
`/usr/lib/sendmail` if such program is available, or
`localhost` otherwise.
---smtp-server-port::
+--smtp-server-port=<port>::
Specifies a port different from the default port (SMTP
- servers typically listen to smtp port 25 and ssmtp port
- 465).
+ servers typically listen to smtp port 25, but may also listen to
+ submission port 587, or the common SSL smtp port 465);
+ symbolic port names (e.g. "submission" instead of 587)
+ are also accepted. The port can also be set with the
+ 'sendemail.smtpserverport' configuration variable.
+
+--smtp-server-option=<option>::
+ If set, specifies the outgoing SMTP server option to use.
+ Default value can be specified by the 'sendemail.smtpserveroption'
+ configuration option.
++
+The --smtp-server-option option must be repeated for each option you want
+to pass to the server. Likewise, different lines in the configuration files
+must be used for each option.
---smtp-user::
- Username for SMTP-AUTH. In place of this option, the following
- configuration variables can be specified:
+--smtp-ssl::
+ Legacy alias for '--smtp-encryption ssl'.
+
+--smtp-user=<user>::
+ Username for SMTP-AUTH. Default is the value of 'sendemail.smtpuser';
+ if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'),
+ then authentication is not attempted.
+
+
+Automating
+~~~~~~~~~~
+
+--to-cmd=<command>::
+ Specify a command to execute once per patch file which
+ should generate patch file specific "To:" entries.
+ Output of this command must be single email address per line.
+ Default is the value of 'sendemail.tocmd' configuration value.
+
+--cc-cmd=<command>::
+ Specify a command to execute once per patch file which
+ should generate patch file specific "Cc:" entries.
+ Output of this command must be single email address per line.
+ Default is the value of 'sendemail.cccmd' configuration value.
+
+--[no-]chain-reply-to::
+ If this is set, each email will be sent as a reply to the previous
+ email sent. If disabled with "--no-chain-reply-to", all emails after
+ the first will be sent as replies to the first email sent. When using
+ this, it is recommended that the first file given be an overview of the
+ entire patch series. Disabled by default, but the 'sendemail.chainreplyto'
+ configuration variable can be used to enable it.
+
+--identity=<identity>::
+ A configuration identity. When given, causes values in the
+ 'sendemail.<identity>' subsection to take precedence over
+ values in the 'sendemail' section. The default identity is
+ the value of 'sendemail.identity'.
+
+--[no-]signed-off-by-cc::
+ If this is set, add emails found in Signed-off-by: or Cc: lines to the
+ cc list. Default is the value of 'sendemail.signedoffbycc' configuration
+ value; if that is unspecified, default to --signed-off-by-cc.
+
+--suppress-cc=<category>::
+ Specify an additional category of recipients to suppress the
+ auto-cc of:
+
--
- * sendemail.smtpuser
- * sendemail.<identity>.smtpuser (see sendemail.identity).
+- 'author' will avoid including the patch author
+- 'self' will avoid including the sender
+- 'cc' will avoid including anyone mentioned in Cc lines in the patch header
+ except for self (use 'self' for that).
+- 'bodycc' will avoid including anyone mentioned in Cc lines in the
+ patch body (commit message) except for self (use 'self' for that).
+- 'sob' will avoid including anyone mentioned in Signed-off-by lines except
+ for self (use 'self' for that).
+- 'cccmd' will avoid running the --cc-cmd.
+- 'body' is equivalent to 'sob' + 'bodycc'
+- 'all' will suppress all auto cc values.
--
+
-However, --smtp-user always overrides these variables.
+Default is the value of 'sendemail.suppresscc' configuration value; if
+that is unspecified, default to 'self' if --suppress-from is
+specified, as well as 'body' if --no-signed-off-cc is specified.
+
+--[no-]suppress-from::
+ If this is set, do not add the From: address to the cc: list.
+ Default is the value of 'sendemail.suppressfrom' configuration
+ value; if that is unspecified, default to --no-suppress-from.
+
+--[no-]thread::
+ If this is set, the In-Reply-To and References headers will be
+ added to each email sent. Whether each mail refers to the
+ previous email (`deep` threading per 'git format-patch'
+ wording) or to the first email (`shallow` threading) is
+ governed by "--[no-]chain-reply-to".
+
-If a username is not specified (with --smtp-user or a
-configuration variable), then authentication is not attempted.
-
---smtp-pass::
- Password for SMTP-AUTH. The argument is optional: If no
- argument is specified, then the empty string is used as
- the password.
+If disabled with "--no-thread", those headers will not be added
+(unless specified with --in-reply-to). Default is the value of the
+'sendemail.thread' configuration value; if that is unspecified,
+default to --thread.
+
-In place of this option, the following configuration variables
-can be specified:
+It is up to the user to ensure that no In-Reply-To header already
+exists when 'git send-email' is asked to add it (especially note that
+'git format-patch' can be configured to do the threading itself).
+Failure to do so may not produce the expected result in the
+recipient's MUA.
+
+
+Administering
+~~~~~~~~~~~~~
+
+--confirm=<mode>::
+ Confirm just before sending:
+
--
- * sendemail.smtppass
- * sendemail.<identity>.smtppass (see sendemail.identity).
+- 'always' will always confirm before sending
+- 'never' will never confirm before sending
+- 'cc' will confirm before sending when send-email has automatically
+ added addresses from the patch to the Cc list
+- 'compose' will confirm before sending the first message when using --compose.
+- 'auto' is equivalent to 'cc' + 'compose'
--
+
-However, --smtp-pass always overrides these variables.
-+
-Furthermore, passwords need not be specified in configuration files
-or on the command line. If a username has been specified (with
---smtp-user or a configuration variable), but no password has been
-specified (with --smtp-pass or a configuration variable), then the
-user is prompted for a password while the input is masked for privacy.
-
---smtp-encryption::
- Specify the encryption to use, either 'ssl' or 'tls'. Any other
- value reverts to plain SMTP. Default is the value of
- 'sendemail.smtpencryption'.
-
---smtp-ssl::
- Legacy alias for '--smtp-encryption=ssl'.
-
---subject::
- Specify the initial subject of the email thread.
- Only necessary if --compose is also set. If --compose
- is not set, this will be prompted for.
-
---suppress-from::
---no-suppress-from::
- If this is set, do not add the From: address to the cc: list.
- Default is the value of 'sendemail.suppressfrom' configuration value;
- if that is unspecified, default to --no-suppress-from.
-
---suppress-cc::
- Specify an additional category of recipients to suppress the
- auto-cc of. 'self' will avoid including the sender, 'author' will
- avoid including the patch author, 'cc' will avoid including anyone
- mentioned in Cc lines in the patch, 'sob' will avoid including
- anyone mentioned in Signed-off-by lines, and 'cccmd' will avoid
- running the --cc-cmd. 'all' will suppress all auto cc values.
- Default is the value of 'sendemail.suppresscc' configuration value;
- if that is unspecified, default to 'self' if --suppress-from is
- specified, as well as 'sob' if --no-signed-off-cc is specified.
-
---thread::
---no-thread::
- If this is set, the In-Reply-To header will be set on each email sent.
- If disabled with "--no-thread", no emails will have the In-Reply-To
- header set.
- Default is the value of the 'sendemail.thread' configuration value;
- if that is unspecified, default to --thread.
+Default is the value of 'sendemail.confirm' configuration value; if that
+is unspecified, default to 'auto' unless any of the suppress options
+have been specified, in which case default to 'compose'.
--dry-run::
Do everything except actually send the emails.
---envelope-sender::
- Specify the envelope sender used to send the emails.
- This is useful if your default address is not the address that is
- subscribed to a list. If you use the sendmail binary, you must have
- suitable privileges for the -f parameter.
-
---to::
- Specify the primary recipient of the emails generated.
- Generally, this will be the upstream maintainer of the
- project involved.
- Default is the value of the 'sendemail.to' configuration value;
- if that is unspecified, this will be prompted for.
+--[no-]format-patch::
+ When an argument may be understood either as a reference or as a file name,
+ choose to understand it as a format-patch argument ('--format-patch')
+ or as a file name ('--no-format-patch'). By default, when such a conflict
+ occurs, git send-email will fail.
+
+--quiet::
+ Make git-send-email less verbose. One line per email should be
+ all that is output.
+
+--[no-]validate::
+ Perform sanity checks on patches.
+ Currently, validation means the following:
+
-The --to option must be repeated for each user you want on the to list.
+--
+ * Warn of patches that contain lines longer than 998 characters; this
+ is due to SMTP limits as described by http://www.ietf.org/rfc/rfc2821.txt.
+--
++
+Default is the value of 'sendemail.validate'; if this is not set,
+default to '--validate'.
+
+--force::
+ Send emails even if safety checks would prevent it.
CONFIGURATION
-------------
-sendemail.identity::
- The default configuration identity. When specified,
- 'sendemail.<identity>.<item>' will have higher precedence than
- 'sendemail.<item>'. This is useful to declare multiple SMTP
- identities and to hoist sensitive authentication information
- out of the repository and into the global configuration file.
sendemail.aliasesfile::
To avoid typing long email addresses, point this to one or more
sendemail.aliasfiletype::
Format of the file(s) specified in sendemail.aliasesfile. Must be
- one of 'mutt', 'mailrc', 'pine', or 'gnus'.
+ one of 'mutt', 'mailrc', 'pine', 'elm', or 'gnus'.
-sendemail.to::
- Email address (or alias) to always send to.
+sendemail.multiedit::
+ If true (default), a single editor instance will be spawned to edit
+ files you have to edit (patches when '--annotate' is used, and the
+ summary when '--compose' is used). If false, files will be edited one
+ after the other, spawning a new editor each time.
-sendemail.cccmd::
- Command to execute to generate per patch file specific "Cc:"s.
+sendemail.confirm::
+ Sets the default for whether to confirm before sending. Must be
+ one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm'
+ in the previous section for the meaning of these values.
-sendemail.bcc::
- Email address (or alias) to always bcc.
-
-sendemail.chainreplyto::
- Boolean value specifying the default to the '--chain_reply_to'
- parameter.
-
-sendemail.smtpserver::
- Default SMTP server to use.
-
-sendemail.smtpserverport::
- Default SMTP server port to use.
-
-sendemail.smtpuser::
- Default SMTP-AUTH username.
-
-sendemail.smtppass::
- Default SMTP-AUTH password.
+EXAMPLE
+-------
+Use gmail as the smtp server
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+To use 'git send-email' to send your patches through the GMail SMTP server,
+edit ~/.gitconfig to specify your account settings:
-sendemail.smtpencryption::
- Default encryption method. Use 'ssl' for SSL (and specify an
- appropriate port), or 'tls' for TLS. Takes precedence over
- 'smtpssl' if both are specified.
+ [sendemail]
+ smtpencryption = tls
+ smtpserver = smtp.gmail.com
+ smtpuser = yourname@gmail.com
+ smtpserverport = 587
-sendemail.smtpssl::
- Legacy boolean that sets 'smtpencryption=ssl' if enabled.
+Once your commits are ready to be sent to the mailing list, run the
+following commands:
-Author
-------
-Written by Ryan Anderson <ryan@michonline.com>
+ $ git format-patch --cover-letter -M origin/master -o outgoing/
+ $ edit outgoing/0000-*
+ $ git send-email outgoing/*
-git-send-email is originally based upon
-send_lots_of_email.pl by Greg Kroah-Hartman.
+Note: the following perl modules are required
+ Net::SMTP::SSL, MIME::Base64 and Authen::SASL
-Documentation
---------------
-Documentation by Ryan Anderson
+SEE ALSO
+--------
+linkgit:git-format-patch[1], linkgit:git-imap-send[1], mbox(5)
GIT
---