![[tokkee]](http://tokkee.org/images/avatar.png){kind=avatar}
index fd53c49fb886b196ba79e40c4c9c4efe0dae5432..aede48877fb080bd12c346c74cf7453860d7de21 100644 (file)
SYNOPSIS
--------
[verse]
-'git push' [--all | --mirror | --tags] [--dry-run] [--receive-pack=<git-receive-pack>]
- [--repo=<repository>] [-f | --force] [-v | --verbose]
- [<repository> <refspec>...]
+'git push' [--all | --mirror | --tags] [-n | --dry-run] [--receive-pack=<git-receive-pack>]
+ [--repo=<repository>] [-f | --force] [-v | --verbose] [-u | --set-upstream]
+ [<repository> [<refspec>...]]
DESCRIPTION
-----------
+
The <src> is often the name of the branch you would want to push, but
it can be any arbitrary "SHA-1 expression", such as `master~4` or
-`HEAD` (see linkgit:git-rev-parse[1]).
+`HEAD` (see linkgit:gitrevisions[7]).
+
The <dst> tells which ref on the remote side is updated with this
push. Arbitrary expressions cannot be used here, an actual ref must
+
The object referenced by <src> is used to update the <dst> reference
on the remote side, but by default this is only allowed if the
-update can fast forward <dst>. By having the optional leading `{plus}`,
+update can fast-forward <dst>. By having the optional leading `{plus}`,
you can tell git to update the <dst> ref even when the update is not a
-fast forward. This does *not* attempt to merge <src> into <dst>. See
+fast-forward. This does *not* attempt to merge <src> into <dst>. See
EXAMPLES below for details.
+
`tag <tag>` means the same as `refs/tags/<tag>:refs/tags/<tag>`.
Pushing an empty <src> allows you to delete the <dst> ref from
the remote repository.
+
-The special refspec `:` (or `{plus}:` to allow non-fast forward updates)
+The special refspec `:` (or `{plus}:` to allow non-fast-forward updates)
directs git to push "matching" branches: for every branch that exists on
the local side, the remote side is updated if a branch of the same name
already exists on the remote side. This is the default operation mode
--all::
Instead of naming each ref to push, specifies that all
- refs under `$GIT_DIR/refs/heads/` be pushed.
+ refs under `refs/heads/` be pushed.
--mirror::
Instead of naming each ref to push, specifies that all
- refs under `$GIT_DIR/refs/` (which includes but is not
+ refs under `refs/` (which includes but is not
limited to `refs/heads/`, `refs/remotes/`, and `refs/tags/`)
be mirrored to the remote repository. Newly created local
refs will be pushed to the remote end, locally updated refs
if the configuration option `remote.<remote>.mirror` is
set.
+-n::
--dry-run::
Do everything except actually send the updates.
+--porcelain::
+ Produce machine-readable output. The output status line for each ref
+ will be tab-separated and sent to stdout instead of stderr. The full
+ symbolic names of the refs will be given.
+
+--delete::
+ All listed refs are deleted from the remote repository. This is
+ the same as prefixing all refs with a colon.
+
--tags::
- All refs under `$GIT_DIR/refs/tags` are pushed, in
+ All refs under `refs/tags` are pushed, in
addition to refspecs explicitly listed on the command
line.
--repo=<repository>::
This option is only relevant if no <repository> argument is
- passed in the invocation. In this case, 'git-push' derives the
+ passed in the invocation. In this case, 'git push' derives the
remote name from the current branch: If it tracks a remote
branch, then that remote repository is pushed to. Otherwise,
the name "origin" is used. For this latter case, this option
+
is that #1 always pushes to "public" whereas #2 pushes to "public"
only if the current branch does not track a remote branch. This is
-useful if you write an alias or script around 'git-push'.
+useful if you write an alias or script around 'git push'.
+
+-u::
+--set-upstream::
+ For every branch that is up to date or successfully pushed, add
+ upstream (tracking) reference, used by argument-less
+ linkgit:git-pull[1] and other commands. For more information,
+ see 'branch.<name>.merge' in linkgit:git-config[1].
--thin::
--no-thin::
- These options are passed to 'git-send-pack'. Thin
- transfer spends extra cycles to minimize the number of
- objects to be sent and meant to be used on slower connection.
+ These options are passed to linkgit:git-send-pack[1]. A thin transfer
+ significantly reduces the amount of sent data when the sender and
+ receiver share many of the same objects in common. The default is
+ \--thin.
+
+-q::
+--quiet::
+ Suppress all output, including the listing of updated refs,
+ unless an error occurs. Progress is not reported to the standard
+ error stream.
-v::
--verbose::
Run verbosely.
+--progress::
+ Progress status is reported on the standard error stream
+ by default when it is attached to a terminal, unless -q
+ is specified. This flag forces progress status even if the
+ standard error stream is not directed to a terminal.
+
+--recurse-submodules=check::
+ Check whether all submodule commits used by the revisions to be
+ pushed are available on a remote tracking branch. Otherwise the
+ push will be aborted and the command will exit with non-zero status.
+
+
include::urls-remotes.txt[]
OUTPUT
<flag> <summary> <from> -> <to> (<reason>)
-------------------------------
+If --porcelain is used, then each line of the output is of the form:
+
+-------------------------------
+ <flag> \t <from>:<to> \t <summary> (<reason>)
+-------------------------------
+
+The status of up-to-date refs is shown only if --porcelain or --verbose
+option is used.
+
flag::
- A single character indicating the status of the ref. This is
- blank for a successfully pushed ref, `!` for a ref that was
- rejected or failed to push, and '=' for a ref that was up to
- date and did not need pushing (note that the status of up to
- date refs is shown only when `git push` is running verbosely).
+ A single character indicating the status of the ref:
+(space);; for a successfully pushed fast-forward;
+`{plus}`;; for a successful forced update;
+`-`;; for a successfully deleted ref;
+`*`;; for a successfully pushed new ref;
+`!`;; for a ref that was rejected or failed to push; and
+`=`;; for a ref that was up to date and did not need pushing.
summary::
For a successfully pushed ref, the summary shows the old and new
values of the ref in a form suitable for using as an argument to
`git log` (this is `<old>..<new>` in most cases, and
- `<old>...<new>` for forced non-fast forward updates). For a
- failed update, more details are given for the failure.
- The string `rejected` indicates that git did not try to send the
- ref at all (typically because it is not a fast forward). The
- string `remote rejected` indicates that the remote end refused
- the update; this rejection is typically caused by a hook on the
- remote side. The string `remote failure` indicates that the
- remote end did not report the successful update of the ref
- (perhaps because of a temporary error on the remote side, a
- break in the network connection, or other transient error).
+ `<old>\...<new>` for forced non-fast-forward updates).
++
+For a failed update, more details are given:
++
+--
+rejected::
+ Git did not try to send the ref at all, typically because it
+ is not a fast-forward and you did not force the update.
+
+remote rejected::
+ The remote end refused the update. Usually caused by a hook
+ on the remote side, or because the remote repository has one
+ of the following safety options in effect:
+ `receive.denyCurrentBranch` (for pushes to the checked out
+ branch), `receive.denyNonFastForwards` (for forced
+ non-fast-forward updates), `receive.denyDeletes` or
+ `receive.denyDeleteCurrent`. See linkgit:git-config[1].
+
+remote failure::
+ The remote end did not report the successful update of the ref,
+ perhaps because of a temporary error on the remote side, a
+ break in the network connection, or other transient error.
+--
from::
The name of the local ref being pushed, minus its
refs, no explanation is needed. For a failed ref, the reason for
failure is described.
+Note about fast-forwards
+------------------------
+
+When an update changes a branch (or more in general, a ref) that used to
+point at commit A to point at another commit B, it is called a
+fast-forward update if and only if B is a descendant of A.
+
+In a fast-forward update from A to B, the set of commits that the original
+commit A built on top of is a subset of the commits the new commit B
+builds on top of. Hence, it does not lose any history.
+
+In contrast, a non-fast-forward update will lose history. For example,
+suppose you and somebody else started at the same commit X, and you built
+a history leading to commit B while the other person built a history
+leading to commit A. The history looks like this:
+
+----------------
+
+ B
+ /
+ ---X---A
+
+----------------
+
+Further suppose that the other person already pushed changes leading to A
+back to the original repository you two obtained the original commit X.
+
+The push done by the other person updated the branch that used to point at
+commit X to point at commit A. It is a fast-forward.
+
+But if you try to push, you will attempt to update the branch (that
+now points at A) with commit B. This does _not_ fast-forward. If you did
+so, the changes introduced by commit A will be lost, because everybody
+will now start building on top of B.
+
+The command by default does not allow an update that is not a fast-forward
+to prevent such loss of history.
+
+If you do not want to lose your work (history from X to B) nor the work by
+the other person (history from X to A), you would need to first fetch the
+history from the repository, create a history that contains changes done
+by both parties, and push the result back.
+
+You can perform "git pull", resolve potential conflicts, and "git push"
+the result. A "git pull" will create a merge commit C between commits A
+and B.
+
+----------------
+
+ B---C
+ / /
+ ---X---A
+
+----------------
+
+Updating A with the resulting merge commit will fast-forward and your
+push will be accepted.
+
+Alternatively, you can rebase your change between X and B on top of A,
+with "git pull --rebase", and push the result back. The rebase will
+create a new commit D that builds the change between X and B on top of
+A.
+
+----------------
+
+ B D
+ / /
+ ---X---A
+
+----------------
+
+Again, updating A with this commit will fast-forward and your push will be
+accepted.
+
+There is another common situation where you may encounter non-fast-forward
+rejection when you try to push, and it is possible even when you are
+pushing into a repository nobody else pushes into. After you push commit
+A yourself (in the first picture in this section), replace it with "git
+commit --amend" to produce commit B, and you try to push it out, because
+forgot that you have pushed A out already. In such a case, and only if
+you are certain that nobody in the meantime fetched your earlier commit A
+(and started building on top of it), you can run "git push --force" to
+overwrite it. In other words, "git push --force" is a method reserved for
+a case where you do mean to lose history.
+
+
Examples
--------
-git push::
+`git push`::
Works like `git push <remote>`, where <remote> is the
current branch's remote (or `origin`, if no remote is
configured for the current branch).
-git push origin::
+`git push origin`::
Without additional configuration, works like
`git push origin :`.
+
the ones in the examples below) can be configured as the default for
`git push origin`.
-git push origin :::
+`git push origin :`::
Push "matching" branches to `origin`. See
<refspec> in the <<OPTIONS,OPTIONS>> section above for a
description of "matching" branches.
-git push origin master::
+`git push origin master`::
Find a ref that matches `master` in the source repository
(most likely, it would find `refs/heads/master`), and update
the same ref (e.g. `refs/heads/master`) in `origin` repository
with it. If `master` did not exist remotely, it would be
created.
-git push origin HEAD::
+`git push origin HEAD`::
A handy way to push the current branch to the same name on the
remote.
-git push origin master:satellite/master dev:satellite/dev::
+`git push origin master:satellite/master dev:satellite/dev`::
Use the source ref that matches `master` (e.g. `refs/heads/master`)
to update the ref that matches `satellite/master` (most probably
`refs/remotes/satellite/master`) in the `origin` repository, then
do the same for `dev` and `satellite/dev`.
-git push origin HEAD:master::
+`git push origin HEAD:master`::
Push the current branch to the remote ref matching `master` in the
`origin` repository. This form is convenient to push the current
branch without thinking about its local name.
-git push origin master:refs/heads/experimental::
+`git push origin master:refs/heads/experimental`::
Create the branch `experimental` in the `origin` repository
by copying the current `master` branch. This form is only
needed to create a new branch or tag in the remote repository when
the local name and the remote name are different; otherwise,
the ref name on its own will work.
-git push origin :experimental::
+`git push origin :experimental`::
Find a ref that matches `experimental` in the `origin` repository
(e.g. `refs/heads/experimental`), and delete it.
-git push origin {plus}dev:master::
+`git push origin {plus}dev:master`::
Update the origin repository's master branch with the dev branch,
- allowing non-fast forward updates. *This can leave unreferenced
+ allowing non-fast-forward updates. *This can leave unreferenced
commits dangling in the origin repository.* Consider the
- following situation, where a fast forward is not possible:
+ following situation, where a fast-forward is not possible:
+
----
o---o---o---A---B origin/master
and so would be unreachable. As such, these commits would be removed by
a `git gc` command on the origin repository.
-
-Author
-------
-Written by Junio C Hamano <gitster@pobox.com>, later rewritten in C
-by Linus Torvalds <torvalds@osdl.org>
-
-Documentation
---------------
-Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>.
-
GIT
---
Part of the linkgit:git[1] suite