![[tokkee]](http://tokkee.org/images/avatar.png){kind=avatar}
index d227cec9ba566caa098c36e8c91b19a8a27fcae5..b586c0f442afd33c2875af26b83bb261de7361b0 100644 (file)
--------
[verse]
'git commit' [-a | --interactive] [-s] [-v] [-u<mode>] [--amend] [--dry-run]
- [(-c | -C) <commit>] [-F <file> | -m <msg>] [--reset-author]
- [--allow-empty] [--no-verify] [-e] [--author=<author>]
- [--cleanup=<mode>] [--] [[-i | -o ]<file>...]
+ [(-c | -C | --fixup | --squash) <commit>] [-F <file> | -m <msg>]
+ [--reset-author] [--allow-empty] [--allow-empty-message] [--no-verify]
+ [-e] [--author=<author>] [--date=<date>] [--cleanup=<mode>]
+ [--status | --no-status] [-i | -o] [--] [<file>...]
DESCRIPTION
-----------
The content to be added can be specified in several ways:
-1. by using 'git-add' to incrementally "add" changes to the
+1. by using 'git add' to incrementally "add" changes to the
index before using the 'commit' command (Note: even modified
files must be "added");
-2. by using 'git-rm' to remove files from the working tree
+2. by using 'git rm' to remove files from the working tree
and the index, again before using the 'commit' command;
3. by listing files as arguments to the 'commit' command, in which
5. by using the --interactive switch with the 'commit' command to decide one
by one which files should be part of the commit, before finalizing the
- operation. Currently, this is done by invoking 'git-add --interactive'.
+ operation. Currently, this is done by invoking 'git add --interactive'.
The `--dry-run` option can be used to obtain a
summary of what is included by any of the above for the next
commit by giving the same set of parameters (options and paths).
If you make a commit and then find a mistake immediately after
-that, you can recover from it with 'git-reset'.
+that, you can recover from it with 'git reset'.
OPTIONS
Like '-C', but with '-c' the editor is invoked, so that
the user can further edit the commit message.
+--fixup=<commit>::
+ Construct a commit message for use with `rebase --autosquash`.
+ The commit message will be the subject line from the specified
+ commit with a prefix of "fixup! ". See linkgit:git-rebase[1]
+ for details.
+
+--squash=<commit>::
+ Construct a commit message for use with `rebase --autosquash`.
+ The commit message subject line is taken from the specified
+ commit with a prefix of "squash! ". Can be used with additional
+ commit message options (`-m`/`-c`/`-C`/`-F`). See
+ linkgit:git-rebase[1] for details.
+
--reset-author::
When used with -C/-c/--amend options, declare that the
authorship of the resulting commit now belongs of the committer.
This also renews the author timestamp.
+--short::
+ When doing a dry-run, give the output in the short-format. See
+ linkgit:git-status[1] for details. Implies `--dry-run`.
+
+--porcelain::
+ When doing a dry-run, give the output in a porcelain-ready
+ format. See linkgit:git-status[1] for details. Implies
+ `--dry-run`.
+
+-z::
+ When showing `short` or `porcelain` status output, terminate
+ entries in the status output with NUL, instead of LF. If no
+ format is given, implies the `--porcelain` output format.
+
-F <file>::
--file=<file>::
Take the commit message from the given file. Use '-' to
read the message from the standard input.
--author=<author>::
- Override the author name used in the commit. You can use the
- standard `A U Thor <author@example.com>` format. Otherwise,
- an existing commit that matches the given string and its author
- name is used.
+ Override the commit author. Specify an explicit author using the
+ standard `A U Thor <author@example.com>` format. Otherwise <author>
+ is assumed to be a pattern and is used to search for an existing
+ commit by that author (i.e. rev-list --all -i --author=<author>);
+ the commit author is then copied from the first such commit found.
+
+--date=<date>::
+ Override the author date used in the commit.
-m <msg>::
--message=<msg>::
Usually recording a commit that has the exact same tree as its
sole parent commit is a mistake, and the command prevents you
from making such a commit. This option bypasses the safety, and
- is primarily for use by foreign scm interface scripts.
+ is primarily for use by foreign SCM interface scripts.
+
+--allow-empty-message::
+ Like --allow-empty this command is primarily for use by foreign
+ SCM interface scripts. It allows you to create a commit with an
+ empty commit message without using plumbing commands like
+ linkgit:git-commit-tree[1].
--cleanup=<mode>::
This option sets how the commit message is cleaned up.
Make a commit only from the paths specified on the
command line, disregarding any contents that have been
staged so far. This is the default mode of operation of
- 'git-commit' if any paths are given on the command line,
+ 'git commit' if any paths are given on the command line,
in which case this option can be omitted.
If this option is specified together with '--amend', then
no paths need to be specified, which can be used to amend
Show untracked files (Default: 'all').
+
The mode parameter is optional, and is used to specify
-the handling of untracked files. The possible options are:
+the handling of untracked files.
++
+The possible options are:
+
---
- 'no' - Show no untracked files
- 'normal' - Shows untracked files and directories
- 'all' - Also shows individual files in untracked directories.
---
+
See linkgit:git-config[1] for configuration variable
used to change the default for when the option is not
to be committed, paths with local changes that will be left
uncommitted and paths that are untracked.
+--status::
+ Include the output of linkgit:git-status[1] in the commit
+ message template when using an editor to prepare the commit
+ message. Defaults to on, but can be used to override
+ configuration variable commit.status.
+
+--no-status::
+ Do not include the output of linkgit:git-status[1] in the
+ commit message template when using an editor to prepare the
+ default commit message.
+
\--::
Do not interpret any more arguments as options.
these files are also staged for the next commit on top
of what have been staged before.
+:git-commit: 1
+include::date-formats.txt[]
EXAMPLES
--------
When recording your own work, the contents of modified files in
your working tree are temporarily stored to a staging area
-called the "index" with 'git-add'. A file can be
+called the "index" with 'git add'. A file can be
reverted back, only in the index but not in the working tree,
to that of the last commit with `git reset HEAD -- <file>`,
-which effectively reverts 'git-add' and prevents the changes to
+which effectively reverts 'git add' and prevents the changes to
this file from participating in the next commit. After building
the state to be committed incrementally with these commands,
`git commit` (without any pathname parameter) is used to record what
this second commit would record the changes to `hello.c` and
`hello.h` as expected.
-After a merge (initiated by 'git-merge' or 'git-pull') stops
+After a merge (initiated by 'git merge' or 'git pull') stops
because of conflicts, cleanly merged
paths are already staged to be committed for you, and paths that
conflicted are left in unmerged state. You would have to first
-check which paths are conflicting with 'git-status'
+check which paths are conflicting with 'git status'
and after fixing them manually in your working tree, you would
-stage the result as usual with 'git-add':
+stage the result as usual with 'git add':
------------
$ git status | grep unmerged