index b432d2518aba3d1be9d86fb1613bbe2f5fa9da4d..8707d0e7404543d0565d72566a8db5946d9467ee 100644 (file)
ifdef::git-format-patch[]
-p::
- Generate patches without diffstat.
+--no-stat::
+ Generate plain patches without any diffstats.
endif::git-format-patch[]
ifndef::git-format-patch[]
-U<n>::
--unified=<n>::
Generate diffs with <n> lines of context instead of
- the usual three. Implies "-p".
+ the usual three.
+ifndef::git-format-patch[]
+ Implies `-p`.
+endif::git-format-patch[]
+ifndef::git-format-patch[]
--raw::
Generate the raw format.
{git-diff-core? This is the default.}
+endif::git-format-patch[]
+ifndef::git-format-patch[]
--patch-with-raw::
- Synonym for "-p --raw".
+ Synonym for `-p --raw`.
+endif::git-format-patch[]
+
+--patience::
+ Generate a diff using the "patience diff" algorithm.
--stat[=width[,name-width]]::
Generate a diffstat. You can override the default
- output width for 80-column terminal by "--stat=width".
+ output width for 80-column terminal by `--stat=width`.
The width of the filename part can be controlled by
giving another width to it separated by a comma.
--numstat::
- Similar to \--stat, but shows number of added and
+ Similar to `\--stat`, but shows number of added and
deleted lines in decimal notation and pathname without
abbreviation, to make it more machine friendly. For
binary files, outputs two `-` instead of saying
`0 0`.
--shortstat::
- Output only the last line of the --stat format containing total
+ Output only the last line of the `--stat` format containing total
number of modified files, as well as number of added and deleted
lines.
Output the distribution of relative amount of changes (number of lines added or
removed) for each sub-directory. Directories with changes below
a cut-off percent (3% by default) are not shown. The cut-off percent
- can be set with "--dirstat=limit". Changes in a child directory is not
- counted for the parent directory, unless "--cumulative" is used.
+ can be set with `--dirstat=limit`. Changes in a child directory is not
+ counted for the parent directory, unless `--cumulative` is used.
--dirstat-by-file[=limit]::
- Same as --dirstat, but counts changed files instead of lines.
+ Same as `--dirstat`, but counts changed files instead of lines.
--summary::
Output a condensed summary of extended header information
such as creations, renames and mode changes.
+ifndef::git-format-patch[]
--patch-with-stat::
- Synonym for "-p --stat".
- {git-format-patch? This is the default.}
+ Synonym for `-p --stat`.
+endif::git-format-patch[]
+
+ifndef::git-format-patch[]
-z::
- NUL-line termination on output. This affects the --raw
- output field terminator. Also output from commands such
- as "git-log" will be delimited with NUL between commits.
+ifdef::git-log[]
+ Separate the commits with NULs instead of with new newlines.
++
+Also, when `--raw` or `--numstat` has been given, do not munge
+pathnames and use NULs as output field terminators.
+endif::git-log[]
+ifndef::git-log[]
+ When `--raw` or `--numstat` has been given, do not munge
+ pathnames and use NULs as output field terminators.
+endif::git-log[]
++
+Without this option, each pathname output will have TAB, LF, double quotes,
+and backslash characters replaced with `\t`, `\n`, `\"`, and `\\`,
+respectively, and the pathname will be enclosed in double quotes if
+any of those replacements occurred.
--name-only::
Show only names of changed files.
Show only names and status of changed files. See the description
of the `--diff-filter` option on what the status letters mean.
+--submodule[=<format>]::
+ Chose the output format for submodule differences. <format> can be one of
+ 'short' and 'log'. 'short' just shows pairs of commit names, this format
+ is used when this option is not given. 'log' is the default value for this
+ option and lists the commits in that commit range like the 'summary'
+ option of linkgit:git-submodule[1] does.
+
--color::
Show colored diff.
Turn off colored diff, even when the configuration file
gives the default to color output.
---color-words::
- Show colored word diff, i.e. color words which have changed.
+--color-words[=<regex>]::
+ Show colored word diff, i.e., color words which have changed.
+ By default, words are separated by whitespace.
++
+When a <regex> is specified, every non-overlapping match of the
+<regex> is considered a word. Anything between these matches is
+considered whitespace and ignored(!) for the purposes of finding
+differences. You may want to append `|[^[:space:]]` to your regular
+expression to make sure that it matches all non-whitespace characters.
+A match that contains a newline is silently truncated(!) at the
+newline.
++
+The regex can also be set via a diff driver or configuration option, see
+linkgit:gitattributes[1] or linkgit:git-config[1]. Giving it explicitly
+overrides any diff driver or configuration setting. Diff drivers
+override configuration settings.
+endif::git-format-patch[]
--no-renames::
Turn off rename detection, even when the configuration
file gives the default to do so.
+ifndef::git-format-patch[]
--check::
Warn if changes introduce trailing whitespace
or an indent that uses a space before a tab. Exits with
non-zero status if problems are found. Not compatible with
--exit-code.
+endif::git-format-patch[]
--full-index::
Instead of the first handful of characters, show the full
line when generating patch format output.
--binary::
- In addition to --full-index, output "binary diff" that
- can be applied with "git apply".
+ In addition to `--full-index`, output a binary diff that
+ can be applied with `git-apply`.
--abbrev[=<n>]::
Instead of showing the full 40-byte hexadecimal object
name in diff-raw format output and diff-tree header
- lines, show only handful hexdigits prefix. This is
- independent of --full-index option above, which controls
+ lines, show only a partial prefix. This is
+ independent of the `--full-index` option above, which controls
the diff-patch output format. Non default number of
- digits can be specified with --abbrev=<n>.
+ digits can be specified with `--abbrev=<n>`.
-B::
Break complete rewrite changes into pairs of delete and create.
-C::
Detect copies as well as renames. See also `--find-copies-harder`.
+ifndef::git-format-patch[]
--diff-filter=[ACDMRTUXB*]::
Select only files that are Added (`A`), Copied (`C`),
Deleted (`D`), Modified (`M`), Renamed (`R`), have their
paths are selected if there is any file that matches
other criteria in the comparison; if there is no file
that matches other criteria, nothing is selected.
+endif::git-format-patch[]
--find-copies-harder::
For performance reasons, by default, `-C` option finds copies only
`-C` option has the same effect.
-l<num>::
- -M and -C options require O(n^2) processing time where n
+ The `-M` and `-C` options require O(n^2) processing time where n
is the number of potential rename/copy targets. This
option prevents rename/copy detection from running if
the number of rename/copy targets exceeds the specified
number.
+ifndef::git-format-patch[]
-S<string>::
- Look for differences that contain the change in <string>.
+ Look for differences that introduce or remove an instance of
+ <string>. Note that this is different than the string simply
+ appearing in diff output; see the 'pickaxe' entry in
+ linkgit:gitdiffcore[7] for more details.
--pickaxe-all::
- When -S finds a change, show all the changes in that
+ When `-S` finds a change, show all the changes in that
changeset, not just the files that contain the change
in <string>.
--pickaxe-regex::
Make the <string> not a plain string but an extended POSIX
regex to match.
+endif::git-format-patch[]
-O<orderfile>::
Output the patch in the order specified in the
<orderfile>, which has one shell glob pattern per line.
+ifndef::git-format-patch[]
-R::
Swap two inputs; that is, show differences from index or
on-disk file to tree contents.
not in a subdirectory (e.g. in a bare repository), you
can name which subdirectory to make the output relative
to by giving a <path> as an argument.
+endif::git-format-patch[]
-a::
--text::
differences even if one line has whitespace where the other
line has none.
+--inter-hunk-context=<lines>::
+ Show the context between diff hunks, up to the specified number
+ of lines, thereby fusing hunks that are close to each other.
+
+ifndef::git-format-patch[]
--exit-code::
Make the program exit with codes similar to diff(1).
That is, it exits with 1 if there were differences and
0 means no differences.
--quiet::
- Disable all output of the program. Implies --exit-code.
+ Disable all output of the program. Implies `--exit-code`.
+endif::git-format-patch[]
--ext-diff::
Allow an external diff helper to be executed. If you set an