index fc0a4ab441d0ee55f44450d2722187e975f84f44..0b1f183ce8c88a59125b94b8a4db55304dcbc8eb 100644 (file)
Composing
~~~~~~~~~
Composing
~~~~~~~~~
---bcc::
+--bcc=<address>::
Specify a "Bcc:" value for each email. Default is the value of
'sendemail.bcc'.
+
The --bcc option must be repeated for each user you want on the bcc list.
Specify a "Bcc:" value for each email. Default is the value of
'sendemail.bcc'.
+
The --bcc option must be repeated for each user you want on the bcc list.
---cc::
+--cc=<address>::
Specify a starting "Cc:" value for each email.
Default is the value of 'sendemail.cc'.
+
Specify a starting "Cc:" value for each email.
Default is the value of 'sendemail.cc'.
+
Use $GIT_EDITOR, core.editor, $VISUAL, or $EDITOR to edit an
introductory message for the patch series.
+
Use $GIT_EDITOR, core.editor, $VISUAL, or $EDITOR to edit an
introductory message for the patch series.
+
-When '--compose' is used, git send-email gets less interactive will use the
-values of the headers you set there. If the body of the email (what you type
-after the headers and a blank line) only contains blank (or GIT: prefixed)
-lines, the summary won't be sent, but git-send-email will still use the
-Headers values if you don't removed them.
+When '--compose' is used, git send-email will use the From, Subject, and
+In-Reply-To headers specified in the message. If the body of the message
+(what you type after the headers and a blank line) only contains blank
+(or GIT: prefixed) lines the summary won't be sent, but From, Subject,
+and In-Reply-To headers will be used unless they are removed.
+
+
-If it wasn't able to see a header in the summary it will ask you about it
-interactively after quitting your editor.
+Missing From or In-Reply-To headers will be prompted for.
---from::
+--from=<address>::
Specify the sender of the emails. This will default to
the value GIT_COMMITTER_IDENT, as returned by "git var -l".
The user will still be prompted to confirm this entry.
Specify the sender of the emails. This will default to
the value GIT_COMMITTER_IDENT, as returned by "git var -l".
The user will still be prompted to confirm this entry.
---in-reply-to::
+--in-reply-to=<identifier>::
Specify the contents of the first In-Reply-To header.
Subsequent emails will refer to the previous email
instead of this if --chain-reply-to is set (the default)
Only necessary if --compose is also set. If --compose
is not set, this will be prompted for.
Specify the contents of the first In-Reply-To header.
Subsequent emails will refer to the previous email
instead of this if --chain-reply-to is set (the default)
Only necessary if --compose is also set. If --compose
is not set, this will be prompted for.
---subject::
+--subject=<string>::
Specify the initial subject of the email thread.
Only necessary if --compose is also set. If --compose
is not set, this will be prompted for.
Specify the initial subject of the email thread.
Only necessary if --compose is also set. If --compose
is not set, this will be prompted for.
---to::
+--to=<address>::
Specify the primary recipient of the emails generated. Generally, this
will be the upstream maintainer of the project involved. Default is the
value of the 'sendemail.to' configuration value; if that is unspecified,
Specify the primary recipient of the emails generated. Generally, this
will be the upstream maintainer of the project involved. Default is the
value of the 'sendemail.to' configuration value; if that is unspecified,
Sending
~~~~~~~
Sending
~~~~~~~
---envelope-sender::
+--envelope-sender=<address>::
Specify the envelope sender used to send the emails.
This is useful if your default address is not the address that is
subscribed to a list. If you use the sendmail binary, you must have
Specify the envelope sender used to send the emails.
This is useful if your default address is not the address that is
subscribed to a list. If you use the sendmail binary, you must have
the 'sendemail.envelopesender' configuration variable; if that is
unspecified, choosing the envelope sender is left to your MTA.
the 'sendemail.envelopesender' configuration variable; if that is
unspecified, choosing the envelope sender is left to your MTA.
---smtp-encryption::
+--smtp-encryption=<encryption>::
Specify the encryption to use, either 'ssl' or 'tls'. Any other
value reverts to plain SMTP. Default is the value of
'sendemail.smtpencryption'.
Specify the encryption to use, either 'ssl' or 'tls'. Any other
value reverts to plain SMTP. Default is the value of
'sendemail.smtpencryption'.
---smtp-pass::
+--smtp-pass[=<password>]::
Password for SMTP-AUTH. The argument is optional: If no
argument is specified, then the empty string is used as
the password. Default is the value of 'sendemail.smtppass',
Password for SMTP-AUTH. The argument is optional: If no
argument is specified, then the empty string is used as
the password. Default is the value of 'sendemail.smtppass',
specified (with '--smtp-pass' or 'sendemail.smtppass'), then the
user is prompted for a password while the input is masked for privacy.
specified (with '--smtp-pass' or 'sendemail.smtppass'), then the
user is prompted for a password while the input is masked for privacy.
---smtp-server::
+--smtp-server=<host>::
If set, specifies the outgoing SMTP server to use (e.g.
`smtp.example.com` or a raw IP address). Alternatively it can
specify a full pathname of a sendmail-like program instead;
If set, specifies the outgoing SMTP server to use (e.g.
`smtp.example.com` or a raw IP address). Alternatively it can
specify a full pathname of a sendmail-like program instead;
`/usr/lib/sendmail` if such program is available, or
`localhost` otherwise.
`/usr/lib/sendmail` if such program is available, or
`localhost` otherwise.
---smtp-server-port::
+--smtp-server-port=<port>::
Specifies a port different from the default port (SMTP
servers typically listen to smtp port 25 and ssmtp port
465). This can be set with 'sendemail.smtpserverport'.
Specifies a port different from the default port (SMTP
servers typically listen to smtp port 25 and ssmtp port
465). This can be set with 'sendemail.smtpserverport'.
--smtp-ssl::
Legacy alias for '--smtp-encryption ssl'.
--smtp-ssl::
Legacy alias for '--smtp-encryption ssl'.
---smtp-user::
+--smtp-user=<user>::
Username for SMTP-AUTH. Default is the value of 'sendemail.smtpuser';
if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'),
then authentication is not attempted.
Username for SMTP-AUTH. Default is the value of 'sendemail.smtpuser';
if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'),
then authentication is not attempted.
Automating
~~~~~~~~~~
Automating
~~~~~~~~~~
---cc-cmd::
+--cc-cmd=<command>::
Specify a command to execute once per patch file which
should generate patch file specific "Cc:" entries.
Output of this command must be single email address per line.
Default is the value of 'sendemail.cccmd' configuration value.
Specify a command to execute once per patch file which
should generate patch file specific "Cc:" entries.
Output of this command must be single email address per line.
Default is the value of 'sendemail.cccmd' configuration value.
---[no-]chain-reply-to::
+--[no-]chain-reply-to=<identifier>::
If this is set, each email will be sent as a reply to the previous
email sent. If disabled with "--no-chain-reply-to", all emails after
the first will be sent as replies to the first email sent. When using
If this is set, each email will be sent as a reply to the previous
email sent. If disabled with "--no-chain-reply-to", all emails after
the first will be sent as replies to the first email sent. When using
entire patch series. Default is the value of the 'sendemail.chainreplyto'
configuration value; if that is unspecified, default to --chain-reply-to.
entire patch series. Default is the value of the 'sendemail.chainreplyto'
configuration value; if that is unspecified, default to --chain-reply-to.
---identity::
+--identity=<identity>::
A configuration identity. When given, causes values in the
'sendemail.<identity>' subsection to take precedence over
values in the 'sendemail' section. The default identity is
A configuration identity. When given, causes values in the
'sendemail.<identity>' subsection to take precedence over
values in the 'sendemail' section. The default identity is
cc list. Default is the value of 'sendemail.signedoffbycc' configuration
value; if that is unspecified, default to --signed-off-by-cc.
cc list. Default is the value of 'sendemail.signedoffbycc' configuration
value; if that is unspecified, default to --signed-off-by-cc.
---suppress-cc::
+--suppress-cc=<category>::
Specify an additional category of recipients to suppress the
auto-cc of:
+
Specify an additional category of recipients to suppress the
auto-cc of:
+
Administering
~~~~~~~~~~~~~
Administering
~~~~~~~~~~~~~
+--confirm=<mode>::
+ Confirm just before sending:
++
+--
+- 'always' will always confirm before sending
+- 'never' will never confirm before sending
+- 'cc' will confirm before sending when send-email has automatically
+ added addresses from the patch to the Cc list
+- 'compose' will confirm before sending the first message when using --compose.
+- 'auto' is equivalent to 'cc' + 'compose'
+--
++
+Default is the value of 'sendemail.confirm' configuration value; if that
+is unspecified, default to 'auto' unless any of the suppress options
+have been specified, in which case default to 'compose'.
+
--dry-run::
Do everything except actually send the emails.
--dry-run::
Do everything except actually send the emails.
summary when '--compose' is used). If false, files will be edited one
after the other, spawning a new editor each time.
summary when '--compose' is used). If false, files will be edited one
after the other, spawning a new editor each time.
+sendemail.confirm::
+ Sets the default for whether to confirm before sending. Must be
+ one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm'
+ in the previous section for the meaning of these values.
+
Author
------
Author
------