![[tokkee]](http://tokkee.org/images/avatar.png){kind=avatar}
index 214ed235c554de89edc4f614072b50c6f0724ded..53a7bb0895036e4d66086b8c656e74588c82c38c 100644 (file)
NAME
----
NAME
----
-git-commit - Record your changes
+git-commit - Record changes to the repository
SYNOPSIS
--------
[verse]
SYNOPSIS
--------
[verse]
-'git-commit' [-a] [-s] [-v] [(-c | -C) <commit> | -F <file> | -m <msg>]
- [-e] [--author <author>] [--] [[-i | -o ]<file>...]
+'git-commit' [-a | --interactive] [-s] [-v]
+ [(-c | -C) <commit> | -F <file> | -m <msg> | --amend]
+ [--no-verify] [-e] [--author <author>]
+ [--] [[-i | -o ]<file>...]
DESCRIPTION
-----------
DESCRIPTION
-----------
-Updates the index file for given paths, or all modified files if
-'-a' is specified, and makes a commit object. The command
-VISUAL and EDITOR environment variables to edit the commit log
-message.
+Use 'git commit' when you want to record your changes into the repository
+along with a log message describing what the commit is about. All changes
+to be committed must be explicitly identified using one of the following
+methods:
+
+1. by using gitlink:git-add[1] to incrementally "add" changes to the
+ next commit before using the 'commit' command (Note: even modified
+ files must be "added");
+
+2. by using gitlink:git-rm[1] to identify content removal for the next
+ commit, again before using the 'commit' command;
+
+3. by directly listing files containing changes to be committed as arguments
+ to the 'commit' command, in which cases only those files alone will be
+ considered for the commit;
+
+4. by using the -a switch with the 'commit' command to automatically "add"
+ changes from all known files i.e. files that have already been committed
+ before, and to automatically "rm" files that have been
+ removed from the working tree, and perform the actual commit.
+
+5. by using the --interactive switch with the 'commit' command to decide one
+ by one which files should be part of the commit, before finalizing the
+ operation. Currently, this is done by invoking `git-add --interactive`.
+
+The gitlink:git-status[1] command can be used to obtain a
+summary of what is included by any of the above for the next
+commit by giving the same set of parameters you would give to
+this command.
+
+If you make a commit and then found a mistake immediately after
+that, you can recover from it with gitlink:git-reset[1].
-This command can run `commit-msg`, `pre-commit`, and
-`post-commit` hooks. See link:hooks.html[hooks] for more
-information.
OPTIONS
-------
-a|--all::
OPTIONS
-------
-a|--all::
- Update all paths in the index file. This flag notices
- files that have been modified and deleted, but new files
- you have not told git about are not affected.
+ Tell the command to automatically stage files that have
+ been modified and deleted, but new files you have not
+ told git about are not affected.
-c or -C <commit>::
Take existing commit object, and reuse the log message
-c or -C <commit>::
Take existing commit object, and reuse the log message
-s|--signoff::
Add Signed-off-by line at the end of the commit message.
-s|--signoff::
Add Signed-off-by line at the end of the commit message.
--v|--verify::
- Look for suspicious lines the commit introduces, and
- abort committing if there is one. The definition of
- 'suspicious lines' is currently the lines that has
- trailing whitespaces, and the lines whose indentation
- has a SP character immediately followed by a TAB
- character. This is the default.
-
--n|--no-verify::
- The opposite of `--verify`.
+--no-verify::
+ This option bypasses the pre-commit hook.
+ See also link:hooks.html[hooks].
-e|--edit::
The message taken from file with `-F`, command line with
-e|--edit::
The message taken from file with `-F`, command line with
commit log message unmodified. This option lets you
further edit the message taken from these sources.
commit log message unmodified. This option lets you
further edit the message taken from these sources.
--i|--include::
- Instead of committing only the files specified on the
- command line, update them in the index file and then
- commit the whole index. This is the traditional
- behaviour.
-
--o|--only::
- Commit only the files specified on the command line.
- This format cannot be used during a merge, nor when the
- index and the latest commit does not match on the
- specified paths to avoid confusion.
-
---::
- Do not interpret any more arguments as options.
-
-<file>...::
- Files to be committed. The meaning of these is
- different between `--include` and `--only`. Without
- either, it defaults `--only` semantics.
+--amend::
+
+ Used to amend the tip of the current branch. Prepare the tree
+ object you would want to replace the latest commit as usual
+ (this includes the usual -i/-o and explicit paths), and the
+ commit log editor is seeded with the commit message from the
+ tip of the current branch. The commit you create replaces the
+ current tip -- if it was a merge, it will have the parents of
+ the current tip as parents -- so the current top commit is
+ discarded.
++
+--
+It is a rough equivalent for:
+------
+ $ git reset --soft HEAD^
+ $ ... do something else to come up with the right tree ...
+ $ git commit -c ORIG_HEAD
-If you make a commit and then found a mistake immediately after
-that, you can recover from it with gitlink:git-reset[1].
+------
+but can be used to amend a merge commit.
+--
+-i|--include::
+ Before making a commit out of staged contents so far,
+ stage the contents of paths given on the command line
+ as well. This is usually not what you want unless you
+ are concluding a conflicted merge.
-Discussion
-----------
+-q|--quiet::
+ Suppress commit summary message.
-`git commit` without _any_ parameter commits the tree structure
-recorded by the current index file. This is a whole-tree commit
-even the command is invoked from a subdirectory.
+\--::
+ Do not interpret any more arguments as options.
-`git commit --include paths...` is equivalent to
+<file>...::
+ When files are given on the command line, the command
+ commits the contents of the named files, without
+ recording the changes already staged. The contents of
+ these files are also staged for the next commit on top
+ of what have been staged before.
- git update-index --remove paths...
- git commit
-That is, update the specified paths to the index and then commit
-the whole tree.
+EXAMPLES
+--------
+When recording your own work, the contents of modified files in
+your working tree are temporarily stored to a staging area
+called the "index" with gitlink:git-add[1]. Removal
+of a file is staged with gitlink:git-rm[1]. After building the
+state to be committed incrementally with these commands, `git
+commit` (without any pathname parameter) is used to record what
+has been staged so far. This is the most basic form of the
+command. An example:
+
+------------
+$ edit hello.c
+$ git rm goodbye.c
+$ git add hello.c
+$ git commit
+------------
+
+Instead of staging files after each individual change, you can
+tell `git commit` to notice the changes to the files whose
+contents are tracked in
+your working tree and do corresponding `git add` and `git rm`
+for you. That is, this example does the same as the earlier
+example if there is no other change in your working tree:
+
+------------
+$ edit hello.c
+$ rm goodbye.c
+$ git commit -a
+------------
+
+The command `git commit -a` first looks at your working tree,
+notices that you have modified hello.c and removed goodbye.c,
+and performs necessary `git add` and `git rm` for you.
+
+After staging changes to many files, you can alter the order the
+changes are recorded in, by giving pathnames to `git commit`.
+When pathnames are given, the command makes a commit that
+only records the changes made to the named paths:
+
+------------
+$ edit hello.c hello.h
+$ git add hello.c hello.h
+$ edit Makefile
+$ git commit Makefile
+------------
+
+This makes a commit that records the modification to `Makefile`.
+The changes staged for `hello.c` and `hello.h` are not included
+in the resulting commit. However, their changes are not lost --
+they are still staged and merely held back. After the above
+sequence, if you do:
+
+------------
+$ git commit
+------------
+
+this second commit would record the changes to `hello.c` and
+`hello.h` as expected.
+
+After a merge (initiated by either gitlink:git-merge[1] or
+gitlink:git-pull[1]) stops because of conflicts, cleanly merged
+paths are already staged to be committed for you, and paths that
+conflicted are left in unmerged state. You would have to first
+check which paths are conflicting with gitlink:git-status[1]
+and after fixing them manually in your working tree, you would
+stage the result as usual with gitlink:git-add[1]:
+
+------------
+$ git status | grep unmerged
+unmerged: hello.c
+$ edit hello.c
+$ git add hello.c
+------------
+
+After resolving conflicts and staging the result, `git ls-files -u`
+would stop mentioning the conflicted path. When you are done,
+run `git commit` to finally record the merge:
+
+------------
+$ git commit
+------------
+
+As with the case to record your own changes, you can use `-a`
+option to save typing. One difference is that during a merge
+resolution, you cannot use `git commit` with pathnames to
+alter the order the changes are committed, because the merge
+should be recorded as a single commit. In fact, the command
+refuses to run when given pathnames (but see `-i` option).
+
+
+DISCUSSION
+----------
-`git commit paths...` largely bypasses the index file and
-commits only the changes made to the specified paths. It has
-however several safety valves to prevent confusion.
+Though not required, it's a good idea to begin the commit message
+with a single short (less than 50 character) line summarizing the
+change, followed by a blank line and then a more thorough description.
+Tools that turn commits into email, for example, use the first line
+on the Subject: line and the rest of the commit in the body.
-. It refuses to run during a merge (i.e. when
- `$GIT_DIR/MERGE_HEAD` exists), and reminds trained git users
- that the traditional semantics now needs -i flag.
+include::i18n.txt[]
-. It refuses to run if named `paths...` are different in HEAD
- and the index (ditto about reminding). Added paths are OK.
- This is because an earlier `git diff` (not `git diff HEAD`)
- would have shown the differences since the last `git
- update-index paths...` to the user, and an inexperienced user
- may mistakenly think that the changes between the index and
- the HEAD (i.e. earlier changes made before the last `git
- update-index paths...` was done) are not being committed.
+ENVIRONMENT VARIABLES
+---------------------
+The command specified by either the VISUAL or EDITOR environment
+variables is used to edit the commit log message.
-. It reads HEAD commit into a temporary index file, updates the
- specified `paths...` and makes a commit. At the same time,
- the real index file is also updated with the same `paths...`.
+HOOKS
+-----
+This command can run `commit-msg`, `pre-commit`, and
+`post-commit` hooks. See link:hooks.html[hooks] for more
+information.
-`git commit --all` updates the index file with _all_ changes to
-the working tree, and makes a whole-tree commit, regardless of
-which subdirectory the command is invoked in.
+SEE ALSO
+--------
+gitlink:git-add[1],
+gitlink:git-rm[1],
+gitlink:git-mv[1],
+gitlink:git-merge[1],
+gitlink:git-commit-tree[1]
Author
------
Author
------