![[tokkee]](http://tokkee.org/images/avatar.png){kind=avatar}
index ce7c170d6982cfd92ca0a23da77cbd6d6901e869..e598cdda45cf0b953a106d6786765b3316e2cc16 100644 (file)
Everybody uses these commands to maintain git repositories.
Everybody uses these commands to maintain git repositories.
- * gitlink:git-init[1] or gitlink:git-clone[1] to create a
+ * linkgit:git-init[1] or linkgit:git-clone[1] to create a
new repository.
new repository.
- * gitlink:git-fsck[1] to check the repository for errors.
+ * linkgit:git-fsck[1] to check the repository for errors.
- * gitlink:git-prune[1] to remove unused objects in the repository.
-
- * gitlink:git-repack[1] to pack loose objects for efficiency.
-
- * gitlink:git-gc[1] to do common housekeeping tasks such as
+ * linkgit:git-gc[1] to do common housekeeping tasks such as
repack and prune.
Examples
repack and prune.
Examples
------------
$ git fsck <1>
$ git count-objects <2>
------------
$ git fsck <1>
$ git count-objects <2>
-$ git repack <3>
-$ git gc <4>
+$ git gc <3>
------------
+
<1> running without `\--full` is usually cheap and assures the
repository health reasonably well.
<2> check how many loose objects there are and how much
disk space is wasted by not repacking.
------------
+
<1> running without `\--full` is usually cheap and assures the
repository health reasonably well.
<2> check how many loose objects there are and how much
disk space is wasted by not repacking.
-<3> without `-a` repacks incrementally. repacking every 4-5MB
-of loose objects accumulation may be a good rule of thumb.
-<4> it is easier to use `git gc` than individual housekeeping commands
-such as `prune` and `repack`. This runs `repack -a -d`.
+<3> repacks the local repository and performs other housekeeping tasks.
Repack a small project into single pack.::
+
------------
Repack a small project into single pack.::
+
------------
-$ git repack -a -d <1>
-$ git prune
+$ git gc <1>
------------
+
<1> pack all the objects reachable from the refs into one pack,
------------
+
<1> pack all the objects reachable from the refs into one pack,
other people, and works alone in a single repository, using the
following commands.
other people, and works alone in a single repository, using the
following commands.
- * gitlink:git-show-branch[1] to see where you are.
+ * linkgit:git-show-branch[1] to see where you are.
- * gitlink:git-log[1] to see what happened.
+ * linkgit:git-log[1] to see what happened.
- * gitlink:git-checkout[1] and gitlink:git-branch[1] to switch
+ * linkgit:git-checkout[1] and linkgit:git-branch[1] to switch
branches.
branches.
- * gitlink:git-add[1] to manage the index file.
+ * linkgit:git-add[1] to manage the index file.
- * gitlink:git-diff[1] and gitlink:git-status[1] to see what
+ * linkgit:git-diff[1] and linkgit:git-status[1] to see what
you are in the middle of doing.
you are in the middle of doing.
- * gitlink:git-commit[1] to advance the current branch.
+ * linkgit:git-commit[1] to advance the current branch.
- * gitlink:git-reset[1] and gitlink:git-checkout[1] (with
+ * linkgit:git-reset[1] and linkgit:git-checkout[1] (with
pathname parameters) to undo changes.
pathname parameters) to undo changes.
- * gitlink:git-merge[1] to merge between local branches.
+ * linkgit:git-merge[1] to merge between local branches.
- * gitlink:git-rebase[1] to maintain topic branches.
+ * linkgit:git-rebase[1] to maintain topic branches.
- * gitlink:git-tag[1] to mark known point.
+ * linkgit:git-tag[1] to mark known point.
Examples
~~~~~~~~
Examples
~~~~~~~~
learn how to communicate with others, and uses these commands in
addition to the ones needed by a standalone developer.
learn how to communicate with others, and uses these commands in
addition to the ones needed by a standalone developer.
- * gitlink:git-clone[1] from the upstream to prime your local
+ * linkgit:git-clone[1] from the upstream to prime your local
repository.
repository.
- * gitlink:git-pull[1] and gitlink:git-fetch[1] from "origin"
+ * linkgit:git-pull[1] and linkgit:git-fetch[1] from "origin"
to keep up-to-date with the upstream.
to keep up-to-date with the upstream.
- * gitlink:git-push[1] to shared repository, if you adopt CVS
+ * linkgit:git-push[1] to shared repository, if you adopt CVS
style shared repository workflow.
style shared repository workflow.
- * gitlink:git-format-patch[1] to prepare e-mail submission, if
+ * linkgit:git-format-patch[1] to prepare e-mail submission, if
you adopt Linux kernel-style public forum workflow.
Examples
you adopt Linux kernel-style public forum workflow.
Examples
$ git log -p ORIG_HEAD.. arch/i386 include/asm-i386 <4>
$ git pull git://git.kernel.org/pub/.../jgarzik/libata-dev.git ALL <5>
$ git reset --hard ORIG_HEAD <6>
$ git log -p ORIG_HEAD.. arch/i386 include/asm-i386 <4>
$ git pull git://git.kernel.org/pub/.../jgarzik/libata-dev.git ALL <5>
$ git reset --hard ORIG_HEAD <6>
-$ git prune <7>
+$ git gc <7>
$ git fetch --tags <8>
------------
+
$ git fetch --tags <8>
------------
+
them and publishes the result for others to use, using these
commands in addition to the ones needed by participants.
them and publishes the result for others to use, using these
commands in addition to the ones needed by participants.
- * gitlink:git-am[1] to apply patches e-mailed in from your
+ * linkgit:git-am[1] to apply patches e-mailed in from your
contributors.
contributors.
- * gitlink:git-pull[1] to merge from your trusted lieutenants.
+ * linkgit:git-pull[1] to merge from your trusted lieutenants.
- * gitlink:git-format-patch[1] to prepare and send suggested
+ * linkgit:git-format-patch[1] to prepare and send suggested
alternative to contributors.
alternative to contributors.
- * gitlink:git-revert[1] to undo botched commits.
+ * linkgit:git-revert[1] to undo botched commits.
- * gitlink:git-push[1] to publish the bleeding edge.
+ * linkgit:git-push[1] to publish the bleeding edge.
Examples
Examples
A repository administrator uses the following tools to set up
and maintain access to the repository by developers.
A repository administrator uses the following tools to set up
and maintain access to the repository by developers.
- * gitlink:git-daemon[1] to allow anonymous download from
+ * linkgit:git-daemon[1] to allow anonymous download from
repository.
repository.
- * gitlink:git-shell[1] can be used as a 'restricted login shell'
+ * linkgit:git-shell[1] can be used as a 'restricted login shell'
for shared central repository users.
link:howto/update-hook-example.txt[update hook howto] has a good
for shared central repository users.
link:howto/update-hook-example.txt[update hook howto] has a good