<_name>All in one ru.cnc-club.filter.gcodetools_ptg_area_area_artefacts_engraving_dxfpoints_tools_library_orientation gcodetools.py inkex.py 1 4 <_param name="help" type="description"> Biarc interpolation tolerance is the maximum distance between path and its approximation. The segment will be split into two segments if the distance between path's segment and it's approximation exceeds biarc interpolation tolerance. 100 -10 <_param name="help" type="description"> "Create area offset": creates several Inkscape path offsets to fill original path's area up to "Area radius" value. Outlines start from "1/2 D" up to "Area width" total width with "D" steps where D is taken from the nearest tool definition ("Tool diameter" value). Only one offset will be created if the "Area width" is equal to "1/2 D". 5.0 <_option value="mark with an arrow">mark with an arrow <_option value="mark with style">mark with style <_option value="delete">delete <_param name="help" type="description"> Usage: 1. Select all Area Offsets (gray outlines) 2. Object/Ungroup (Shift+Ctrl+G) 3. Press Apply Suspected small objects will be marked out by colored arrows. 150 10 4 false <_param name="help" type="description"> This function creates path to engrave sharp angles. Cutter's shape function is defined by the tool. Some simple shapes: cone....(45 degrees)...........: w cone....(height/diameter=10/3).: 10/3 w sphere..("r" diameter).........: math.sqrt(max(0,r**2-w**2)) ellipse.(R1=r and R2=r*4r).....: math.sqrt(max(0,r**2-w**2))*4 <_param name="help" type="description"> Convert selected objects to drill points (as dxf_import plugin does). Also you can save original shape. Only the start point of each curve will be used. Also you can manually select object, open XML editor (Shift+Ctrl+X) and add or remove XML tag 'dxfpoint' with any value. <_option value='save'>set as dxfpoint and save shape <_option value='replace'>set as dxfpoint and draw arrow <_option value='clear'>clear dxfpoint sign <_option value='default tool'>default <_option value='cylinder cutter'>cylinder <_option value='cone cutter'>cone <_option value='plasma cutter'>plasma <_option value='tangent knife'>tangent knife <_option value='lathe cutter'>lathe cutter <_option value='check'>Just check tools <_param name="help" type="description"> Selected tool type fills appropriate default values. You can change these values using the Text tool later on. The topmost (z order) tool in the active layer is used. If there is no tool inside the current layer it is taken from the upper layer. Press Apply to create new tool. <_option value="2">2-points mode (move and rotate, maintained aspect ratio X/Y) <_option value="3">3-points mode (move, rotate and mirror, different X/Y scale) 0 -1 mm in <_param name="help" type="description"> Orientation points are used to calculate transformation (offset,scale,mirror,rotation in XY plane) of the path. 3-points mode only: do not put all three into one line (use 2-points mode instead). You can modify Z surface, Z depth values later using text tool (3rd coordinates). If there are no orientation points inside current layer they are taken from the upper layer. Do not ungroup orientation points! You can select them using double click to enter the group or by Ctrl+Click. Now press apply to create control points (independent set for each layer). 1 0.0 true 0.05 output.ngc true /home 5 mm in None Parameterize Gcode Flip y axis and parameterize Gcode Round all values to 4 digits false <_param name="fullhelp" type="description"> Gcodetools plug-in: converts paths to Gcode (using circular interpolation), makes offset paths and engraves sharp corners using cone cutters. This plug-in calculates Gcode for paths using circular interpolation or linear motion when needed. Tutorials, manuals and support can be found at English support forum: http://www.cnc-club.ru/gcodetools and Russian support forum: http://www.cnc-club.ru/gcodetoolsru Credits: Nick Drobchenko, Vladimir Kalyaev, John Brooker, Henry Nicolas. Gcodetools ver. 1.6.01 path