1 package corefunctions;
2 use Exporter;
3 @ISA = qw(Exporter);
4 my @events = (
5 "get_events",
6 "registered",
7 'new_syslog_config',
8 "new_ntp_config",
9 "new_ldap_config",
10 "new_key",
11 "generate_hw_digest", # no implementations
12 "detect_hardware",
13 "confirm_new_key",
14 "ping",
15 "import_events", # no implementations
16 );
17 @EXPORT = @events;
19 use strict;
20 use warnings;
21 use Data::Dumper;
22 use Fcntl;
23 use GOSA::GosaSupportDaemon;
24 use File::Basename;
26 my ($ldap_enabled, $offline_enabled, $ldap_config, $pam_config, $nss_config, $fai_logpath);
28 my $chrony_file = "/etc/chrony/chrony.conf";
29 my $syslog_file = "/etc/syslog.conf";
31 my %cfg_defaults = (
32 "client" => {
33 "ldap" => [\$ldap_enabled, 1],
34 "offline-ldap" => [\$offline_enabled, 0],
35 "ldap-config" => [\$ldap_config, "/etc/ldap/ldap.conf"],
36 "pam-config" => [\$pam_config, "/etc/pam_ldap.conf"],
37 "nss-config" => [\$nss_config, "/etc/libnss-ldap.conf"],
38 "fai-logpath" => [\$fai_logpath, "/var/log/fai/fai.log"],
39 },
40 );
42 BEGIN {}
44 END {}
46 ### Start ######################################################################
48 &main::read_configfile($main::cfg_file, %cfg_defaults);
51 my $server_address = $main::server_address;
52 my $server_key = $main::server_key;
53 my $client_mac_address = $main::client_mac_address;
55 sub write_to_file {
56 my ($string, $file) = @_;
57 my $error = 0;
59 if( not defined $file || not -f $file ) {
60 &main::daemon_log("ERROR: $0: check '-f file' failed: $file", 1);
61 $error++;
62 }
63 if( not defined $string || 0 == length($string)) {
64 &main::daemon_log("ERROR: $0: empty string to write to file '$file'", 1);
65 $error++;
66 }
68 if( $error == 0 ) {
70 chomp($string);
72 if( not -f $file ) {
73 open (FILE, "$file");
74 close(FILE);
75 }
76 open(FILE, ">> $file") or &main::daemon_log("ERROR in corefunctions.pm: can not open '$file' to write '$string'", 1);;
77 print FILE $string."\n";
78 close(FILE);
79 }
81 return;
82 }
85 sub get_events {
86 return \@events;
87 }
89 sub daemon_log {
90 my ($msg, $level) = @_ ;
91 &main::daemon_log($msg, $level);
92 return;
93 }
95 sub registered {
96 my ($msg, $msg_hash) = @_ ;
98 my $header = @{$msg_hash->{'header'}}[0];
99 if( $header eq "registered" ) {
100 my $source = @{$msg_hash->{'source'}}[0];
101 &main::daemon_log("INFO: registration at $source", 1);
102 $main::server_address = $source;
103 }
105 # set globaly variable client_address
106 my $target = @{$msg_hash->{'target'}}[0];
107 $main::client_address = $target;
109 # set registration_flag to true
110 my $out_hash = &create_xml_hash("registered", $main::client_address, $main::server_address);
111 # Write the MAC address to file
112 if(stat($main::opts_file)) {
113 unlink($main::opts_file);
114 }
116 my $opts_file_FH;
117 my $hostname= $main::client_dnsname;
118 $hostname =~ s/\..*$//;
119 $hostname =~ tr/A-Z/a-z/;
120 open($opts_file_FH, ">$main::opts_file");
121 print $opts_file_FH "MAC=\"$main::client_mac_address\"\n";
122 print $opts_file_FH "IPADDRESS=\"$main::client_ip\"\n";
123 print $opts_file_FH "HOSTNAME=\"$hostname\"\n";
124 print $opts_file_FH "FQDN=\"$main::client_dnsname\"\n";
125 if(defined(@{$msg_hash->{'ldap_available'}}) &&
126 @{$msg_hash->{'ldap_available'}}[0] eq "true") {
127 print $opts_file_FH "LDAP_AVAILABLE=\"true\"\n";
128 }
129 if(defined(@{$msg_hash->{'error'}})) {
130 my $errormsg= @{$msg_hash->{'error'}}[0];
131 print $opts_file_FH "GOSA_SI_ERROR=\"$errormsg\"\n";
132 &write_to_file($errormsg, $fai_logpath);
133 }
134 close($opts_file_FH);
136 my $out_msg = &create_xml_string($out_hash);
137 return $out_msg;
138 }
140 sub server_leaving {
141 my ($msg_hash) = @_ ;
142 my $source = @{$msg_hash->{'source'}}[0];
143 my $header = @{$msg_hash->{'header'}}[0];
145 daemon_log("gosa-si-server $source is going down, cause registration procedure", 1);
146 $main::server_address = "none";
147 $main::server_key = "none";
149 # reinitialization of default values in config file
150 &main::read_configfile;
152 # registrated at new daemon
153 &main::register_at_server();
155 return;
156 }
159 ## @method new_syslog_config
160 # Update or add syslog messages forwarding to specified syslog server.
161 # @param msg - STRING - xml message with tag server
162 # @param msg_hash - HASHREF - message information parsed into a hash
163 sub new_syslog_config {
164 my ($msg, $msg_hash) = @_ ;
166 # Sanity check of incoming message
167 if ((not exists $msg_hash->{'server'}) || (not @{$msg_hash->{'server'}} == 1) ) {
168 &main::daemon_log("ERROR: 'new_syslog_config'-message does not contain a syslog server: $msg", 1);
169 return;
170 }
172 # Fetch the new syslog server from incoming message
173 my $syslog_server = @{$msg_hash->{'server'}}[0];
174 &main::daemon_log("INFO: found syslog server: ".join(", ", $syslog_server), 5);
175 my $found_server_flag = 0;
177 # Sanity check of /etc/syslog.conf
178 if (not -f $syslog_file) {
179 &main::daemon_log("ERROR: file '$syslog_file' does not exist, cannot do syslog reconfiguration!", 1);
180 return;
181 }
183 # Substitute existing server with new syslog server
184 open (FILE, "<$syslog_file");
185 my @file = <FILE>;
186 close FILE;
187 my $syslog_server_line = "*.*\t@".$syslog_server."\n";
188 foreach my $line (@file) {
189 if ($line =~ /^\*\.\*\s+@/) {
190 $line = $syslog_server_line;
191 $found_server_flag++;
192 }
193 }
195 # Append new server if no old server configuration found
196 if (not $found_server_flag) {
197 push(@file, "\n#\n# syslog server configuration written by GOsa-si\n#\n");
198 push(@file, $syslog_server_line);
199 }
201 # Write changes to file and close it
202 open (FILE, "+>$syslog_file");
203 print FILE join("", @file);
204 close FILE;
205 &main::daemon_log("INFO: wrote new configuration file: $syslog_file", 5);
207 # Restart syslog deamon
208 my $res = qx(/etc/init.d/sysklogd restart);
209 &main::daemon_log("INFO: restart syslog daemon: $res", 5);
211 return;
212 }
215 ## @method new_ntp_config
216 # Updates the server options in /etc/chrony/chrony.conf and restarts the chrony service
217 # @param msg - STRING - xml message with tag server
218 # @param msg_hash - HASHREF - message information parsed into a hash
219 sub new_ntp_config {
220 my ($msg, $msg_hash) = @_ ;
222 # Sanity check of incoming message
223 if ((not exists $msg_hash->{'server'}) || (not @{$msg_hash->{'server'}} >= 1) ) {
224 &main::daemon_log("ERROR: 'new_ntp_config'-message does not contain a ntp server: $msg", 1);
225 return;
226 }
228 # Fetch the new ntp server from incoming message
229 my $ntp_servers = $msg_hash->{'server'};
230 &main::daemon_log("INFO: found ntp server: ".join(", ", @$ntp_servers), 5);
231 my $ntp_servers_string = "server\t".join("\nserver\t", @$ntp_servers)."\n";
232 my $found_server_flag = 0;
234 # Sanity check of /etc/chrony/chrony.conf
235 if (not -f $chrony_file) {
236 &main::daemon_log("ERROR: file '$chrony_file' does not exist, cannot do ntp reconfiguration!", 1);
237 return;
238 }
240 # Substitute existing server with new ntp server
241 open (FILE, "<$chrony_file");
242 my @file = <FILE>;
243 close FILE;
244 foreach my $line (@file) {
245 if ($line =~ /server /) {
246 if ($found_server_flag) {
247 $line =~ s/^server [\s\S]+$//;
248 } else {
249 $line =~ s/^server [\s\S]+$/$ntp_servers_string/;
250 }
251 $found_server_flag++;
252 }
253 }
255 # Append new server if no old server configuration found
256 if (not $found_server_flag) {
257 push(@file, "\n# ntp server configuration written by GOsa-si\n");
258 push(@file, $ntp_servers_string);
259 }
261 # Write changes to file and close it
262 open (FILE, ">$chrony_file");
263 print FILE join("", @file);
264 close FILE;
265 &main::daemon_log("INFO: wrote new configuration file: $chrony_file", 5);
267 # Restart chrony deamon
268 my $res = qx(/etc/init.d/chrony force-reload);
269 &main::daemon_log("INFO: restart chrony daemon: $res", 5);
271 return;
272 }
275 sub new_ldap_config {
276 my ($msg, $msg_hash) = @_ ;
278 if( $ldap_enabled != 1 ) {
279 return;
280 }
282 my $element;
283 my @ldap_uris;
284 my $ldap_base;
285 my @ldap_options;
286 my @pam_options;
287 my @nss_options;
288 my $goto_admin;
289 my $goto_secret;
290 my $admin_base= "";
291 my $department= "";
292 my $release= "";
293 my $unit_tag;
295 # Transform input into array
296 while ( my ($key, $value) = each(%$msg_hash) ) {
297 if ($key =~ /^(source|target|header)$/) {
298 next;
299 }
301 foreach $element (@$value) {
302 if ($key =~ /^ldap_uri$/) {
303 push (@ldap_uris, $element);
304 next;
305 }
306 if ($key =~ /^ldap_base$/) {
307 $ldap_base= $element;
308 next;
309 }
310 if ($key =~ /^goto_admin$/) {
311 $goto_admin= $element;
312 next;
313 }
314 if ($key =~ /^goto_secret$/) {
315 $goto_secret= $element;
316 next;
317 }
318 if ($key =~ /^ldap_cfg$/) {
319 push (@ldap_options, "$element");
320 next;
321 }
322 if ($key =~ /^pam_cfg$/) {
323 push (@pam_options, "$element");
324 next;
325 }
326 if ($key =~ /^nss_cfg$/) {
327 push (@nss_options, "$element");
328 next;
329 }
330 if ($key =~ /^admin_base$/) {
331 $admin_base= $element;
332 next;
333 }
334 if ($key =~ /^department$/) {
335 $department= $element;
336 next;
337 }
338 if ($key =~ /^unit_tag$/) {
339 $unit_tag= $element;
340 next;
341 }
342 if ($key =~ /^release$/) {
343 $release= $element;
344 next;
345 }
346 }
347 }
349 # Unit tagging enabled?
350 if (defined $unit_tag){
351 push (@pam_options, "pam_filter gosaUnitTag=$unit_tag");
352 push (@nss_options, "nss_base_passwd $admin_base?sub?gosaUnitTag=$unit_tag");
353 push (@nss_options, "nss_base_group $admin_base?sub?gosaUnitTag=$unit_tag");
354 }
356 # Setup ldap.conf
357 my $file1;
358 my $file2;
359 open(file1, "> $ldap_config");
360 print file1 "# This file was automatically generated by gosa-si-client. Do not change.\n";
361 print file1 "URI";
362 foreach $element (@ldap_uris) {
363 print file1 " $element";
364 }
365 print file1 "\nBASE $ldap_base\n";
366 foreach $element (@ldap_options) {
367 print file1 "$element\n";
368 }
369 close (file1);
370 daemon_log("wrote $ldap_config", 5);
372 # Setup pam_ldap.conf / libnss-ldap.conf
373 open(file1, "> $pam_config");
374 open(file2, "> $nss_config");
375 print file1 "# This file was automatically generated by gosa-si-client. Do not change.\n";
376 print file2 "# This file was automatically generated by gosa-si-client. Do not change.\n";
377 print file1 "uri";
378 print file2 "uri";
379 foreach $element (@ldap_uris) {
380 print file1 " $element";
381 print file2 " $element";
382 }
383 print file1 "\nbase $ldap_base\n";
384 print file2 "\nbase $ldap_base\n";
385 foreach $element (@pam_options) {
386 print file1 "$element\n";
387 }
388 foreach $element (@nss_options) {
389 print file2 "$element\n";
390 }
391 close (file2);
392 daemon_log("wrote $nss_config", 5);
393 close (file1);
394 daemon_log("wrote $pam_config", 5);
396 # Create goto.secrets if told so - for compatibility reasons
397 if (defined $goto_admin){
398 open(file1, "> /etc/goto/secret");
399 close(file1);
400 chown(0,0, "/etc/goto/secret");
401 chmod(0600, "/etc/goto/secret");
402 open(file1, "> /etc/goto/secret");
403 print file1 "GOTOADMIN=\"$goto_admin\"\nGOTOSECRET=\"$goto_secret\"\n";
404 close(file1);
405 daemon_log("wrote /etc/goto/secret", 5);
406 }
408 # Write shell based config
409 my $cfg_name= "/etc/ldap/ldap-shell.conf";
411 # Get first LDAP server
412 my $ldap_server= $ldap_uris[0];
413 $ldap_server=~ s/^ldap:\/\/([^:]+).*$/$1/;
415 open(file1, "> $cfg_name");
416 print file1 "LDAP_BASE=\"$ldap_base\"\n";
417 print file1 "LDAP_SERVER=\"$ldap_server\"\n";
418 print file1 "LDAP_URIS=\"@ldap_uris\"\n";
419 print file1 "ADMIN_BASE=\"$admin_base\"\n";
420 print file1 "DEPARTMENT=\"$department\"\n";
421 print file1 "RELEASE=\"$release\"\n";
422 print file1 "UNIT_TAG=\"".(defined $unit_tag ? "$unit_tag" : "")."\"\n";
423 print file1 "UNIT_TAG_FILTER=\"".(defined $unit_tag ? "(gosaUnitTag=$unit_tag)" : "")."\"\n";
424 close(file1);
425 daemon_log("wrote $cfg_name", 5);
427 # Write offline config
428 if ($offline_enabled){
429 $cfg_name= "/etc/ldap/ldap-offline.conf";
431 # Get first LDAP server
432 open(file1, "> $cfg_name");
433 print file1 "LDAP_BASE=\"$ldap_base\"\n";
434 print file1 "LDAP_SERVER=\"127.0.0.1\"\n";
435 print file1 "LDAP_URIS=\"ldap://127.0.0.1\"\n";
436 print file1 "ADMIN_BASE=\"$admin_base\"\n";
437 print file1 "DEPARTMENT=\"$department\"\n";
438 print file1 "RELEASE=\"$release\"\n";
439 print file1 "UNIT_TAG=\"".(defined $unit_tag ? "$unit_tag" : "")."\"\n";
440 print file1 "UNIT_TAG_FILTER=\"".(defined $unit_tag ? "(gosaUnitTag=$unit_tag)" : "")."\"\n";
441 close(file1);
442 daemon_log("wrote $cfg_name", 5);
443 }
445 return;
446 }
449 sub new_key {
450 # my ($msg_hash) = @_ ;
451 my $new_server_key = &main::create_passwd();
453 my $out_hash = &create_xml_hash("new_key", $main::client_address, $main::server_address, $new_server_key);
454 my $out_msg = &create_xml_string($out_hash);
456 # set global $NEW_KEY_FLAG, gosa-si-client cause a reregistering process if no 'confirm_new_key'-msg
457 # comes from gosa-si-server within a given time
460 return $out_msg;
461 }
464 sub confirm_new_key {
465 my ($msg, $msg_hash) = @_ ;
466 my $header = @{$msg_hash->{'header'}}[0];
467 my $target = @{$msg_hash->{'target'}}[0];
468 my $source = @{$msg_hash->{'source'}}[0];
470 &main::daemon_log("confirm new key from $source", 5);
471 return;
473 }
476 sub detect_hardware {
478 &write_to_file('goto-hardware-detection-start', $fai_logpath);
480 my $hwinfo= `which hwinfo`;
481 chomp $hwinfo;
483 if (!(defined($hwinfo) && length($hwinfo) > 0)) {
484 &main::daemon_log("ERROR: hwinfo was not found in \$PATH! Hardware detection will not work!", 1);
485 return;
486 }
488 my $result= {
489 gotoHardwareChecksum => &main::generate_hw_digest(),
490 macAddress => $client_mac_address,
491 gotoXMonitor => "",
492 gotoXDriver => "",
493 gotoXMouseType => "",
494 gotoXMouseport => "",
495 gotoXkbModel => "",
496 gotoXHsync => "",
497 gotoXVsync => "",
498 gotoXResolution => "",
499 ghUsbSupport => "",
500 gotoSndModule => "",
501 ghGfxAdapter => "",
502 ghNetNic => "",
503 ghSoundAdapter => "",
504 ghMemSize => "",
505 ghCpuType => "",
506 gotoModules => [],
507 ghIdeDev => [],
508 ghScsiDev => [],
509 };
511 &main::daemon_log("Starting hardware detection", 4);
512 my $gfxcard= `$hwinfo --gfxcard`;
513 my $primary_adapter= $1 if $gfxcard =~ /^Primary display adapter:\s#(\d+)\n/m;
514 if(defined($primary_adapter)) {
515 ($result->{ghGfxAdapter}, $result->{gotoXDriver}) = ($1,$2) if
516 $gfxcard =~ /$primary_adapter:.*?Model:\s\"([^\"]*)\".*?Server Module:\s(\w*).*?\n\n/s;
517 }
518 my $monitor= `$hwinfo --monitor`;
519 my $primary_monitor= $1 if $monitor =~ /^(\d*):.*/m;
520 if(defined($primary_monitor)) {
521 ($result->{gotoXMonitor}, $result->{gotoXResolution}, $result->{gotoXVsync}, $result->{gotoXHsync})= ($1,$2,$3,$4) if
522 $monitor =~ /$primary_monitor:\s.*?Model:\s\"(.*?)\".*?Max\.\sResolution:\s([0-9x]*).*?Vert\.\sSync\sRange:\s([\d\-]*)\sHz.*?Hor\.\sSync\sRange:\s([\d\-]*)\skHz.*/s;
523 }
525 if(length($result->{gotoXHsync}) == 0) {
526 # set default values
527 $result->{gotoXHsync} = "30+50";
528 $result->{gotoXVsync} = "30+90";
529 }
531 my $mouse= `$hwinfo --mouse`;
532 my $primary_mouse= $1 if $mouse =~ /^(\d*):.*/m;
533 if(defined($primary_mouse)) {
534 ($result->{gotoXMouseport}, $result->{gotoXMouseType}) = ($1,$2) if
535 $mouse =~ /$primary_mouse:\s.*?Device\sFile:\s(.*?)\s.*?XFree86\sProtocol:\s(.*?)\n.*?/s;
536 }
538 my $sound= `$hwinfo --sound`;
539 my $primary_sound= $1 if $sound =~ /^(\d*):.*/m;
540 if(defined($primary_sound)) {
541 ($result->{ghSoundAdapter}, $result->{gotoSndModule})= ($1,$2) if
542 $sound =~ /$primary_sound:\s.*?Model:\s\"(.*?)\".*?Driver\sModules:\s\"(.*?)\".*/s;
543 }
545 my $netcard= `hwinfo --netcard`;
546 my $primary_netcard= $1 if $netcard =~ /^(\d*):.*/m;
547 if(defined($primary_netcard)) {
548 $result->{ghNetNic}= $1 if $netcard =~ /$primary_netcard:\s.*?Model:\s\"(.*?)\".*/s;
549 }
551 my $keyboard= `hwinfo --keyboard`;
552 my $primary_keyboard= $1 if $keyboard =~ /^(\d*):.*/m;
553 if(defined($primary_keyboard)) {
554 $result->{gotoXkbModel}= $1 if $keyboard =~ /$primary_keyboard:\s.*?XkbModel:\s(.*?)\n.*/s;
555 }
557 $result->{ghCpuType}= sprintf "%s / %s - %s",
558 `cat /proc/cpuinfo` =~ /.*?vendor_id\s+:\s(.*?)\n.*?model\sname\s+:\s(.*?)\n.*?cpu\sMHz\s+:\s(.*?)\n.*/s;
559 $result->{ghMemSize}= $1 if `cat /proc/meminfo` =~ /^MemTotal:\s+(.*?)\skB.*/s;
561 my @gotoModules=();
562 for my $line(`lsmod`) {
563 if (($line =~ /^Module.*$/) or ($line =~ /^snd.*$/)) {
564 next;
565 } else {
566 push @gotoModules, $1 if $line =~ /^(\w*).*$/
567 }
568 }
569 my %seen = ();
571 # Remove duplicates and save
572 push @{$result->{gotoModules}}, grep { ! $seen{$_} ++ } @gotoModules;
574 $result->{ghUsbSupport} = (-d "/proc/bus/usb")?"true":"false";
576 foreach my $device(`hwinfo --ide` =~ /^.*?Model:\s\"(.*?)\".*$/mg) {
577 push @{$result->{ghIdeDev}}, $device;
578 }
580 foreach my $device(`hwinfo --scsi` =~ /^.*?Model:\s\"(.*?)\".*$/mg) {
581 push @{$result->{ghScsiDev}}, $device;
582 }
584 &main::daemon_log("Hardware detection done!", 4);
586 &write_to_file('goto-hardware-detection-stop', $fai_logpath);
588 return &main::send_msg_hash_to_target(
589 &main::create_xml_hash("detected_hardware", $main::client_address, $main::server_address, $result),
590 $main::server_address,
591 $main::server_key,
592 );
593 }
596 sub ping {
597 my ($msg, $msg_hash) = @_ ;
598 my $header = @{$msg_hash->{'header'}}[0];
599 my $source = @{$msg_hash->{'source'}}[0];
600 my $target = @{$msg_hash->{'target'}}[0];
601 my $session_id = @{$msg_hash->{'session_id'}}[0];
602 my $out_msg;
603 my $out_hash;
605 # there is no session_id so send 'got_new_ping'-msg
606 if (not defined $session_id) {
607 $out_hash = &main::create_xml_hash("got_new_ping", $target, $source);
609 # there is a session_id so send 'answer_$session_id'-msg because there is
610 # a process waiting for this message
611 } else {
612 $out_hash = &main::create_xml_hash("answer_$session_id", $target, $source);
613 &add_content2xml_hash($out_hash, "session_id", $session_id);
614 }
616 my $forward_to_gosa = @{$msg_hash->{'forward_to_gosa'}}[0];
617 if (defined $forward_to_gosa) {
618 &add_content2xml_hash($out_hash, "forward_to_gosa", $forward_to_gosa);
619 }
620 $out_msg = &main::create_xml_string($out_hash);
621 return $out_msg;
623 }
625 1;