git-rebase.sh

   1 #!/bin/sh
   2 #
   3 # Copyright (c) 2005 Junio C Hamano.
   4 #
   5
   6 USAGE='[--onto <newbase>] <upstream> [<branch>]'
   7 LONG_USAGE='git-rebase replaces <branch> with a new branch of the
   8 same name.  When the --onto option is provided the new branch starts
   9 out with a HEAD equal to <newbase>, otherwise it is equal to <upstream>
  10 It then attempts to create a new commit for each commit from the original
  11 <branch> that does not exist in the <upstream> branch.
  12
  13 It is possible that a merge failure will prevent this process from being
  14 completely automatic.  You will have to resolve any such merge failure
  15 and run git rebase --continue.  Another option is to bypass the commit
  16 that caused the merge failure with git rebase --skip.  To restore the
  17 original <branch> and remove the .dotest working files, use the command
  18 git rebase --abort instead.
  19
  20 Note that if <branch> is not specified on the command line, the
  21 currently checked out branch is used.  You must be in the top
  22 directory of your project to start (or continue) a rebase.
  23
  24 Example:       git-rebase master~1 topic
  25
  26         A---B---C topic                   A'\''--B'\''--C'\'' topic
  27        /                   -->           /
  28   D---E---F---G master          D---E---F---G master
  29 '
  30 . git-sh-setup
  31
  32 RESOLVEMSG="
  33 When you have resolved this problem run \"git rebase --continue\".
  34 If you would prefer to skip this patch, instead run \"git rebase --skip\".
  35 To restore the original branch and stop rebasing run \"git rebase --abort\".
  36 "
  37 unset newbase
  38 strategy=recursive
  39 do_merge=
  40 dotest=$GIT_DIR/.dotest-merge
  41 prec=4
  42
  43 continue_merge () {
  44         test -n "$prev_head" || die "prev_head must be defined"
  45         test -d "$dotest" || die "$dotest directory does not exist"
  46
  47         unmerged=$(git-ls-files -u)
  48         if test -n "$unmerged"
  49         then
  50                 echo "You still have unmerged paths in your index"
  51                 echo "did you forget update-index?"
  52                 die "$RESOLVEMSG"
  53         fi
  54
  55         if test -n "`git-diff-index HEAD`"
  56         then
  57                 if ! git-commit -C "`cat $dotest/current`"
  58                 then
  59                         echo "Commit failed, please do not call \"git commit\""
  60                         echo "directly, but instead do one of the following: "
  61                         die "$RESOLVEMSG"
  62                 fi
  63                 printf "Committed: %0${prec}d" $msgnum
  64         else
  65                 printf "Already applied: %0${prec}d" $msgnum
  66         fi
  67         echo ' '`git-rev-list --pretty=oneline -1 HEAD | \
  68                                 sed 's/^[a-f0-9]\+ //'`
  69
  70         prev_head=`git-rev-parse HEAD^0`
  71         # save the resulting commit so we can read-tree on it later
  72         echo "$prev_head" > "$dotest/prev_head"
  73
  74         # onto the next patch:
  75         msgnum=$(($msgnum + 1))
  76         echo "$msgnum" >"$dotest/msgnum"
  77 }
  78
  79 call_merge () {
  80         cmt="$(cat $dotest/cmt.$1)"
  81         echo "$cmt" > "$dotest/current"
  82         git-merge-$strategy "$cmt^" -- HEAD "$cmt"
  83         rv=$?
  84         case "$rv" in
  85         0)
  86                 return
  87                 ;;
  88         1)
  89                 test -d "$GIT_DIR/rr-cache" && git-rerere
  90                 die "$RESOLVEMSG"
  91                 ;;
  92         2)
  93                 echo "Strategy: $rv $strategy failed, try another" 1>&2
  94                 die "$RESOLVEMSG"
  95                 ;;
  96         *)
  97                 die "Unknown exit code ($rv) from command:" \
  98                         "git-merge-$strategy $cmt^ -- HEAD $cmt"
  99                 ;;
 100         esac
 101 }
 102
 103 finish_rb_merge () {
 104         rm -r "$dotest"
 105         echo "All done."
 106 }
 107
 108 while case "$#" in 0) break ;; esac
 109 do
 110         case "$1" in
 111         --continue)
 112                 diff=$(git-diff-files)
 113                 case "$diff" in
 114                 ?*)     echo "You must edit all merge conflicts and then"
 115                         echo "mark them as resolved using git update-index"
 116                         exit 1
 117                         ;;
 118                 esac
 119                 if test -d "$dotest"
 120                 then
 121                         prev_head="`cat $dotest/prev_head`"
 122                         end="`cat $dotest/end`"
 123                         msgnum="`cat $dotest/msgnum`"
 124                         onto="`cat $dotest/onto`"
 125                         continue_merge
 126                         while test "$msgnum" -le "$end"
 127                         do
 128                                 call_merge "$msgnum"
 129                                 continue_merge
 130                         done
 131                         finish_rb_merge
 132                         exit
 133                 fi
 134                 git am --resolved --3way --resolvemsg="$RESOLVEMSG" \
 135                         --reflog-action=rebase
 136                 exit
 137                 ;;
 138         --skip)
 139                 if test -d "$dotest"
 140                 then
 141                         prev_head="`cat $dotest/prev_head`"
 142                         end="`cat $dotest/end`"
 143                         msgnum="`cat $dotest/msgnum`"
 144                         msgnum=$(($msgnum + 1))
 145                         onto="`cat $dotest/onto`"
 146                         while test "$msgnum" -le "$end"
 147                         do
 148                                 call_merge "$msgnum"
 149                                 continue_merge
 150                         done
 151                         finish_rb_merge
 152                         exit
 153                 fi
 154                 git am -3 --skip --resolvemsg="$RESOLVEMSG" \
 155                         --reflog-action=rebase
 156                 exit
 157                 ;;
 158         --abort)
 159                 if test -d "$dotest"
 160                 then
 161                         rm -r "$dotest"
 162                 elif test -d .dotest
 163                 then
 164                         rm -r .dotest
 165                 else
 166                         die "No rebase in progress?"
 167                 fi
 168                 git reset --hard ORIG_HEAD
 169                 exit
 170                 ;;
 171         --onto)
 172                 test 2 -le "$#" || usage
 173                 newbase="$2"
 174                 shift
 175                 ;;
 176         -M|-m|--m|--me|--mer|--merg|--merge)
 177                 do_merge=t
 178                 ;;
 179         -s=*|--s=*|--st=*|--str=*|--stra=*|--strat=*|--strate=*|\
 180                 --strateg=*|--strategy=*|\
 181         -s|--s|--st|--str|--stra|--strat|--strate|--strateg|--strategy)
 182                 case "$#,$1" in
 183                 *,*=*)
 184                         strategy=`expr "z$1" : 'z-[^=]*=\(.*\)'` ;;
 185                 1,*)
 186                         usage ;;
 187                 *)
 188                         strategy="$2"
 189                         shift ;;
 190                 esac
 191                 do_merge=t
 192                 ;;
 193         -*)
 194                 usage
 195                 ;;
 196         *)
 197                 break
 198                 ;;
 199         esac
 200         shift
 201 done
 202
 203 # Make sure we do not have .dotest
 204 if test -z "$do_merge"
 205 then
 206         if mkdir .dotest
 207         then
 208                 rmdir .dotest
 209         else
 210                 echo >&2 '
 211 It seems that I cannot create a .dotest directory, and I wonder if you
 212 are in the middle of patch application or another rebase.  If that is not
 213 the case, please rm -fr .dotest and run me again.  I am stopping in case
 214 you still have something valuable there.'
 215                 exit 1
 216         fi
 217 else
 218         if test -d "$dotest"
 219         then
 220                 die "previous dotest directory $dotest still exists." \
 221                         'try git-rebase < --continue | --abort >'
 222         fi
 223 fi
 224
 225 # The tree must be really really clean.
 226 git-update-index --refresh || exit
 227 diff=$(git-diff-index --cached --name-status -r HEAD)
 228 case "$diff" in
 229 ?*)     echo "$diff"
 230         exit 1
 231         ;;
 232 esac
 233
 234 # The upstream head must be given.  Make sure it is valid.
 235 upstream_name="$1"
 236 upstream=`git rev-parse --verify "${upstream_name}^0"` ||
 237     die "invalid upstream $upstream_name"
 238
 239 # If a hook exists, give it a chance to interrupt
 240 if test -x "$GIT_DIR/hooks/pre-rebase"
 241 then
 242         "$GIT_DIR/hooks/pre-rebase" ${1+"$@"} || {
 243                 echo >&2 "The pre-rebase hook refused to rebase."
 244                 exit 1
 245         }
 246 fi
 247
 248 # If the branch to rebase is given, first switch to it.
 249 case "$#" in
 250 2)
 251         branch_name="$2"
 252         git-checkout "$2" || usage
 253         ;;
 254 *)
 255         branch_name=`git symbolic-ref HEAD` || die "No current branch"
 256         branch_name=`expr "z$branch_name" : 'zrefs/heads/\(.*\)'`
 257         ;;
 258 esac
 259 branch=$(git-rev-parse --verify "${branch_name}^0") || exit
 260
 261 # Make sure the branch to rebase onto is valid.
 262 onto_name=${newbase-"$upstream_name"}
 263 onto=$(git-rev-parse --verify "${onto_name}^0") || exit
 264
 265 # Now we are rebasing commits $upstream..$branch on top of $onto
 266
 267 # Check if we are already based on $onto, but this should be
 268 # done only when upstream and onto are the same.
 269 mb=$(git-merge-base "$onto" "$branch")
 270 if test "$upstream" = "$onto" && test "$mb" = "$onto"
 271 then
 272         echo >&2 "Current branch $branch_name is up to date."
 273         exit 0
 274 fi
 275
 276 # Rewind the head to "$onto"; this saves our current head in ORIG_HEAD.
 277 git-reset --hard "$onto"
 278
 279 # If the $onto is a proper descendant of the tip of the branch, then
 280 # we just fast forwarded.
 281 if test "$mb" = "$branch"
 282 then
 283         echo >&2 "Fast-forwarded $branch_name to $onto_name."
 284         exit 0
 285 fi
 286
 287 if test -z "$do_merge"
 288 then
 289         git-format-patch -k --stdout --full-index "$upstream"..ORIG_HEAD |
 290         git am --binary -3 -k --resolvemsg="$RESOLVEMSG" \
 291                 --reflog-action=rebase
 292         exit $?
 293 fi
 294
 295 if test "@@NO_PYTHON@@" && test "$strategy" = "recursive-old"
 296 then
 297         die 'The recursive-old merge strategy is written in Python,
 298 which this installation of git was not configured with.  Please consider
 299 a different merge strategy (e.g. recursive, resolve, or stupid)
 300 or install Python and git with Python support.'
 301
 302 fi
 303
 304 # start doing a rebase with git-merge
 305 # this is rename-aware if the recursive (default) strategy is used
 306
 307 mkdir -p "$dotest"
 308 echo "$onto" > "$dotest/onto"
 309 prev_head=`git-rev-parse HEAD^0`
 310 echo "$prev_head" > "$dotest/prev_head"
 311
 312 msgnum=0
 313 for cmt in `git-rev-list --no-merges "$upstream"..ORIG_HEAD \
 314                         | @@PERL@@ -e 'print reverse <>'`
 315 do
 316         msgnum=$(($msgnum + 1))
 317         echo "$cmt" > "$dotest/cmt.$msgnum"
 318 done
 319
 320 echo 1 >"$dotest/msgnum"
 321 echo $msgnum >"$dotest/end"
 322
 323 end=$msgnum
 324 msgnum=1
 325
 326 while test "$msgnum" -le "$end"
 327 do
 328         call_merge "$msgnum"
 329         continue_merge
 330 done
 331
 332 finish_rb_merge