git-bisect.sh

   1 #!/bin/sh
   2
   3 USAGE='[start|bad|good|skip|next|reset|visualize|replay|log|run]'
   4 LONG_USAGE='git bisect start [<bad> [<good>...]] [--] [<pathspec>...]
   5         reset bisect state and start bisection.
   6 git bisect bad [<rev>]
   7         mark <rev> a known-bad revision.
   8 git bisect good [<rev>...]
   9         mark <rev>... known-good revisions.
  10 git bisect skip [<rev>...]
  11         mark <rev>... untestable revisions.
  12 git bisect next
  13         find next bisection to test and check it out.
  14 git bisect reset [<branch>]
  15         finish bisection search and go back to branch.
  16 git bisect visualize
  17         show bisect status in gitk.
  18 git bisect replay <logfile>
  19         replay bisection log.
  20 git bisect log
  21         show bisect log.
  22 git bisect run <cmd>...
  23         use <cmd>... to automatically bisect.'
  24
  25 OPTIONS_SPEC=
  26 . git-sh-setup
  27 require_work_tree
  28
  29 _x40='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
  30 _x40="$_x40$_x40$_x40$_x40$_x40$_x40$_x40$_x40"
  31
  32 sq() {
  33         @@PERL@@ -e '
  34                 for (@ARGV) {
  35                         s/'\''/'\'\\\\\'\''/g;
  36                         print " '\''$_'\''";
  37                 }
  38                 print "\n";
  39         ' "$@"
  40 }
  41
  42 bisect_autostart() {
  43         test -f "$GIT_DIR/BISECT_NAMES" || {
  44                 echo >&2 'You need to start by "git bisect start"'
  45                 if test -t 0
  46                 then
  47                         echo >&2 -n 'Do you want me to do it for you [Y/n]? '
  48                         read yesno
  49                         case "$yesno" in
  50                         [Nn]*)
  51                                 exit ;;
  52                         esac
  53                         bisect_start
  54                 else
  55                         exit 1
  56                 fi
  57         }
  58 }
  59
  60 bisect_start() {
  61         #
  62         # Verify HEAD. If we were bisecting before this, reset to the
  63         # top-of-line master first!
  64         #
  65         head=$(GIT_DIR="$GIT_DIR" git symbolic-ref -q HEAD) ||
  66         head=$(GIT_DIR="$GIT_DIR" git rev-parse --verify HEAD) ||
  67         die "Bad HEAD - I need a HEAD"
  68         #
  69         # Check that we either already have BISECT_START, or that the
  70         # branches bisect, new-bisect don't exist, to not override them.
  71         #
  72         test -s "$GIT_DIR/BISECT_START" ||
  73                 if git show-ref --verify -q refs/heads/bisect ||
  74                     git show-ref --verify -q refs/heads/new-bisect; then
  75                         die 'The branches "bisect" and "new-bisect" must not exist.'
  76                 fi
  77         start_head=''
  78         case "$head" in
  79         refs/heads/bisect)
  80                 branch=`cat "$GIT_DIR/BISECT_START"`
  81                 git checkout $branch || exit
  82                 ;;
  83         refs/heads/*|$_x40)
  84                 # This error message should only be triggered by cogito usage,
  85                 # and cogito users should understand it relates to cg-seek.
  86                 [ -s "$GIT_DIR/head-name" ] && die "won't bisect on seeked tree"
  87                 start_head="${head#refs/heads/}"
  88                 ;;
  89         *)
  90                 die "Bad HEAD - strange symbolic ref"
  91                 ;;
  92         esac
  93
  94         #
  95         # Get rid of any old bisect state
  96         #
  97         bisect_clean_state
  98
  99         #
 100         # Check for one bad and then some good revisions.
 101         #
 102         has_double_dash=0
 103         for arg; do
 104             case "$arg" in --) has_double_dash=1; break ;; esac
 105         done
 106         orig_args=$(sq "$@")
 107         bad_seen=0
 108         eval=''
 109         while [ $# -gt 0 ]; do
 110             arg="$1"
 111             case "$arg" in
 112             --)
 113                 shift
 114                 break
 115                 ;;
 116             *)
 117                 rev=$(git rev-parse --verify "$arg^{commit}" 2>/dev/null) || {
 118                     test $has_double_dash -eq 1 &&
 119                         die "'$arg' does not appear to be a valid revision"
 120                     break
 121                 }
 122                 case $bad_seen in
 123                 0) state='bad' ; bad_seen=1 ;;
 124                 *) state='good' ;;
 125                 esac
 126                 eval="$eval bisect_write '$state' '$rev' 'nolog'; "
 127                 shift
 128                 ;;
 129             esac
 130         done
 131
 132         sq "$@" >"$GIT_DIR/BISECT_NAMES"
 133         test -n "$start_head" && echo "$start_head" >"$GIT_DIR/BISECT_START"
 134         eval "$eval"
 135         echo "git-bisect start$orig_args" >>"$GIT_DIR/BISECT_LOG"
 136         bisect_auto_next
 137 }
 138
 139 bisect_write() {
 140         state="$1"
 141         rev="$2"
 142         nolog="$3"
 143         case "$state" in
 144                 bad)            tag="$state" ;;
 145                 good|skip)      tag="$state"-"$rev" ;;
 146                 *)              die "Bad bisect_write argument: $state" ;;
 147         esac
 148         git update-ref "refs/bisect/$tag" "$rev"
 149         echo "# $state: $(git show-branch $rev)" >>"$GIT_DIR/BISECT_LOG"
 150         test -z "$nolog" && echo "git-bisect $state $rev" >>"$GIT_DIR/BISECT_LOG"
 151 }
 152
 153 bisect_state() {
 154         bisect_autostart
 155         state=$1
 156         case "$#,$state" in
 157         0,*)
 158                 die "Please call 'bisect_state' with at least one argument." ;;
 159         1,bad|1,good|1,skip)
 160                 rev=$(git rev-parse --verify HEAD) ||
 161                         die "Bad rev input: HEAD"
 162                 bisect_write "$state" "$rev" ;;
 163         2,bad|*,good|*,skip)
 164                 shift
 165                 eval=''
 166                 for rev in "$@"
 167                 do
 168                         sha=$(git rev-parse --verify "$rev^{commit}") ||
 169                                 die "Bad rev input: $rev"
 170                         eval="$eval bisect_write '$state' '$sha'; "
 171                 done
 172                 eval "$eval" ;;
 173         *,bad)
 174                 die "'git bisect bad' can take only one argument." ;;
 175         *)
 176                 usage ;;
 177         esac
 178         bisect_auto_next
 179 }
 180
 181 bisect_next_check() {
 182         missing_good= missing_bad=
 183         git show-ref -q --verify refs/bisect/bad || missing_bad=t
 184         test -n "$(git for-each-ref "refs/bisect/good-*")" || missing_good=t
 185
 186         case "$missing_good,$missing_bad,$1" in
 187         ,,*)
 188                 : have both good and bad - ok
 189                 ;;
 190         *,)
 191                 # do not have both but not asked to fail - just report.
 192                 false
 193                 ;;
 194         t,,good)
 195                 # have bad but not good.  we could bisect although
 196                 # this is less optimum.
 197                 echo >&2 'Warning: bisecting only with a bad commit.'
 198                 if test -t 0
 199                 then
 200                         printf >&2 'Are you sure [Y/n]? '
 201                         case "$(read yesno)" in [Nn]*) exit 1 ;; esac
 202                 fi
 203                 : bisect without good...
 204                 ;;
 205         *)
 206                 THEN=''
 207                 test -f "$GIT_DIR/BISECT_NAMES" || {
 208                         echo >&2 'You need to start by "git bisect start".'
 209                         THEN='then '
 210                 }
 211                 echo >&2 'You '$THEN'need to give me at least one good' \
 212                         'and one bad revisions.'
 213                 echo >&2 '(You can use "git bisect bad" and' \
 214                         '"git bisect good" for that.)'
 215                 exit 1 ;;
 216         esac
 217 }
 218
 219 bisect_auto_next() {
 220         bisect_next_check && bisect_next || :
 221 }
 222
 223 filter_skipped() {
 224         _eval="$1"
 225         _skip="$2"
 226
 227         if [ -z "$_skip" ]; then
 228                 eval $_eval
 229                 return
 230         fi
 231
 232         # Let's parse the output of:
 233         # "git rev-list --bisect-vars --bisect-all ..."
 234         eval $_eval | while read hash line
 235         do
 236                 case "$VARS,$FOUND,$TRIED,$hash" in
 237                         # We display some vars.
 238                         1,*,*,*) echo "$hash $line" ;;
 239
 240                         # Split line.
 241                         ,*,*,---*) ;;
 242
 243                         # We had nothing to search.
 244                         ,,,bisect_rev*)
 245                                 echo "bisect_rev="
 246                                 VARS=1
 247                                 ;;
 248
 249                         # We did not find a good bisect rev.
 250                         # This should happen only if the "bad"
 251                         # commit is also a "skip" commit.
 252                         ,,*,bisect_rev*)
 253                                 echo "bisect_rev=$TRIED"
 254                                 VARS=1
 255                                 ;;
 256
 257                         # We are searching.
 258                         ,,*,*)
 259                                 TRIED="${TRIED:+$TRIED|}$hash"
 260                                 case "$_skip" in
 261                                 *$hash*) ;;
 262                                 *)
 263                                         echo "bisect_rev=$hash"
 264                                         echo "bisect_tried=\"$TRIED\""
 265                                         FOUND=1
 266                                         ;;
 267                                 esac
 268                                 ;;
 269
 270                         # We have already found a rev to be tested.
 271                         ,1,*,bisect_rev*) VARS=1 ;;
 272                         ,1,*,*) ;;
 273
 274                         # ???
 275                         *) die "filter_skipped error " \
 276                             "VARS: '$VARS' " \
 277                             "FOUND: '$FOUND' " \
 278                             "TRIED: '$TRIED' " \
 279                             "hash: '$hash' " \
 280                             "line: '$line'"
 281                         ;;
 282                 esac
 283         done
 284 }
 285
 286 exit_if_skipped_commits () {
 287         _tried=$1
 288         if expr "$_tried" : ".*[|].*" > /dev/null ; then
 289                 echo "There are only 'skip'ped commit left to test."
 290                 echo "The first bad commit could be any of:"
 291                 echo "$_tried" | tr '[|]' '[\012]'
 292                 echo "We cannot bisect more!"
 293                 exit 2
 294         fi
 295 }
 296
 297 bisect_next() {
 298         case "$#" in 0) ;; *) usage ;; esac
 299         bisect_autostart
 300         bisect_next_check good
 301
 302         skip=$(git for-each-ref --format='%(objectname)' \
 303                 "refs/bisect/skip-*" | tr '\012' ' ') || exit
 304
 305         BISECT_OPT=''
 306         test -n "$skip" && BISECT_OPT='--bisect-all'
 307
 308         bad=$(git rev-parse --verify refs/bisect/bad) &&
 309         good=$(git for-each-ref --format='^%(objectname)' \
 310                 "refs/bisect/good-*" | tr '\012' ' ') &&
 311         eval="git rev-list --bisect-vars $BISECT_OPT $good $bad --" &&
 312         eval="$eval $(cat "$GIT_DIR/BISECT_NAMES")" &&
 313         eval=$(filter_skipped "$eval" "$skip") &&
 314         eval "$eval" || exit
 315
 316         if [ -z "$bisect_rev" ]; then
 317                 echo "$bad was both good and bad"
 318                 exit 1
 319         fi
 320         if [ "$bisect_rev" = "$bad" ]; then
 321                 exit_if_skipped_commits "$bisect_tried"
 322                 echo "$bisect_rev is first bad commit"
 323                 git diff-tree --pretty $bisect_rev
 324                 exit 0
 325         fi
 326
 327         # We should exit here only if the "bad"
 328         # commit is also a "skip" commit (see above).
 329         exit_if_skipped_commits "$bisect_rev"
 330
 331         echo "Bisecting: $bisect_nr revisions left to test after this"
 332         git branch -D new-bisect 2> /dev/null
 333         git checkout -q -b new-bisect "$bisect_rev" || exit
 334         git branch -M new-bisect bisect
 335         git show-branch "$bisect_rev"
 336 }
 337
 338 bisect_visualize() {
 339         bisect_next_check fail
 340
 341         if test $# = 0
 342         then
 343                 case "${DISPLAY+set}${MSYSTEM+set}${SECURITYSESSIONID+set}" in
 344                 '')     set git log ;;
 345                 set*)   set gitk ;;
 346                 esac
 347         else
 348                 case "$1" in
 349                 git*|tig) ;;
 350                 -*)     set git log "$@" ;;
 351                 *)      set git "$@" ;;
 352                 esac
 353         fi
 354
 355         not=$(git for-each-ref --format='%(refname)' "refs/bisect/good-*")
 356         eval '"$@"' refs/bisect/bad --not $not -- $(cat "$GIT_DIR/BISECT_NAMES")
 357 }
 358
 359 bisect_reset() {
 360         test -f "$GIT_DIR/BISECT_NAMES" || {
 361                 echo "We are not bisecting."
 362                 return
 363         }
 364         case "$#" in
 365         0) if [ -s "$GIT_DIR/BISECT_START" ]; then
 366                branch=`cat "$GIT_DIR/BISECT_START"`
 367            else
 368                branch=master
 369            fi ;;
 370         1) git show-ref --verify --quiet -- "refs/heads/$1" ||
 371                die "$1 does not seem to be a valid branch"
 372            branch="$1" ;;
 373         *)
 374             usage ;;
 375         esac
 376         if git checkout "$branch"; then
 377                 # Cleanup head-name if it got left by an old version of git-bisect
 378                 rm -f "$GIT_DIR/head-name"
 379                 rm -f "$GIT_DIR/BISECT_START"
 380                 bisect_clean_state
 381         fi
 382 }
 383
 384 bisect_clean_state() {
 385         # There may be some refs packed during bisection.
 386         git for-each-ref --format='%(refname) %(objectname)' refs/bisect/\* refs/heads/bisect |
 387         while read ref hash
 388         do
 389                 git update-ref -d $ref $hash
 390         done
 391         rm -f "$GIT_DIR/BISECT_LOG"
 392         rm -f "$GIT_DIR/BISECT_NAMES"
 393         rm -f "$GIT_DIR/BISECT_RUN"
 394 }
 395
 396 bisect_replay () {
 397         test -r "$1" || die "cannot read $1 for replaying"
 398         bisect_reset
 399         while read bisect command rev
 400         do
 401                 test "$bisect" = "git-bisect" || continue
 402                 case "$command" in
 403                 start)
 404                         cmd="bisect_start $rev"
 405                         eval "$cmd" ;;
 406                 good|bad|skip)
 407                         bisect_write "$command" "$rev" ;;
 408                 *)
 409                         die "?? what are you talking about?" ;;
 410                 esac
 411         done <"$1"
 412         bisect_auto_next
 413 }
 414
 415 bisect_run () {
 416     bisect_next_check fail
 417
 418     while true
 419     do
 420       echo "running $@"
 421       "$@"
 422       res=$?
 423
 424       # Check for really bad run error.
 425       if [ $res -lt 0 -o $res -ge 128 ]; then
 426           echo >&2 "bisect run failed:"
 427           echo >&2 "exit code $res from '$@' is < 0 or >= 128"
 428           exit $res
 429       fi
 430
 431       # Find current state depending on run success or failure.
 432       # A special exit code of 125 means cannot test.
 433       if [ $res -eq 125 ]; then
 434           state='skip'
 435       elif [ $res -gt 0 ]; then
 436           state='bad'
 437       else
 438           state='good'
 439       fi
 440
 441       # We have to use a subshell because "bisect_state" can exit.
 442       ( bisect_state $state > "$GIT_DIR/BISECT_RUN" )
 443       res=$?
 444
 445       cat "$GIT_DIR/BISECT_RUN"
 446
 447       if grep "first bad commit could be any of" "$GIT_DIR/BISECT_RUN" \
 448                 > /dev/null; then
 449           echo >&2 "bisect run cannot continue any more"
 450           exit $res
 451       fi
 452
 453       if [ $res -ne 0 ]; then
 454           echo >&2 "bisect run failed:"
 455           echo >&2 "'bisect_state $state' exited with error code $res"
 456           exit $res
 457       fi
 458
 459       if grep "is first bad commit" "$GIT_DIR/BISECT_RUN" > /dev/null; then
 460           echo "bisect run success"
 461           exit 0;
 462       fi
 463
 464     done
 465 }
 466
 467
 468 case "$#" in
 469 0)
 470     usage ;;
 471 *)
 472     cmd="$1"
 473     shift
 474     case "$cmd" in
 475     start)
 476         bisect_start "$@" ;;
 477     bad|good|skip)
 478         bisect_state "$cmd" "$@" ;;
 479     next)
 480         # Not sure we want "next" at the UI level anymore.
 481         bisect_next "$@" ;;
 482     visualize|view)
 483         bisect_visualize "$@" ;;
 484     reset)
 485         bisect_reset "$@" ;;
 486     replay)
 487         bisect_replay "$@" ;;
 488     log)
 489         cat "$GIT_DIR/BISECT_LOG" ;;
 490     run)
 491         bisect_run "$@" ;;
 492     *)
 493         usage ;;
 494     esac
 495 esac