git-bisect.sh

   1 #!/bin/sh
   2
   3 USAGE='[start|bad|good|next|reset|visualize|replay|log|run]'
   4 LONG_USAGE='git bisect start [<pathspec>]       reset bisect state and start bisection.
   5 git bisect bad [<rev>]          mark <rev> a known-bad revision.
   6 git bisect good [<rev>...]      mark <rev>... known-good revisions.
   7 git bisect next                 find next bisection to test and check it out.
   8 git bisect reset [<branch>]     finish bisection search and go back to branch.
   9 git bisect visualize            show bisect status in gitk.
  10 git bisect replay <logfile>     replay bisection log.
  11 git bisect log                  show bisect log.
  12 git bisect run <cmd>...         use <cmd>... to automatically bisect.'
  13
  14 . git-sh-setup
  15 require_work_tree
  16
  17 sq() {
  18         @@PERL@@ -e '
  19                 for (@ARGV) {
  20                         s/'\''/'\'\\\\\'\''/g;
  21                         print " '\''$_'\''";
  22                 }
  23                 print "\n";
  24         ' "$@"
  25 }
  26
  27 bisect_autostart() {
  28         test -d "$GIT_DIR/refs/bisect" || {
  29                 echo >&2 'You need to start by "git bisect start"'
  30                 if test -t 0
  31                 then
  32                         echo >&2 -n 'Do you want me to do it for you [Y/n]? '
  33                         read yesno
  34                         case "$yesno" in
  35                         [Nn]*)
  36                                 exit ;;
  37                         esac
  38                         bisect_start
  39                 else
  40                         exit 1
  41                 fi
  42         }
  43 }
  44
  45 bisect_start() {
  46         #
  47         # Verify HEAD. If we were bisecting before this, reset to the
  48         # top-of-line master first!
  49         #
  50         head=$(GIT_DIR="$GIT_DIR" git-symbolic-ref HEAD) ||
  51         die "Bad HEAD - I need a symbolic ref"
  52         case "$head" in
  53         refs/heads/bisect)
  54                 if [ -s "$GIT_DIR/head-name" ]; then
  55                     branch=`cat "$GIT_DIR/head-name"`
  56                 else
  57                     branch=master
  58                 fi
  59                 git checkout $branch || exit
  60                 ;;
  61         refs/heads/*)
  62                 [ -s "$GIT_DIR/head-name" ] && die "won't bisect on seeked tree"
  63                 echo "$head" | sed 's#^refs/heads/##' >"$GIT_DIR/head-name"
  64                 ;;
  65         *)
  66                 die "Bad HEAD - strange symbolic ref"
  67                 ;;
  68         esac
  69
  70         #
  71         # Get rid of any old bisect state
  72         #
  73         rm -f "$GIT_DIR/refs/heads/bisect"
  74         rm -rf "$GIT_DIR/refs/bisect/"
  75         mkdir "$GIT_DIR/refs/bisect"
  76         {
  77             printf "git-bisect start"
  78             sq "$@"
  79         } >"$GIT_DIR/BISECT_LOG"
  80         sq "$@" >"$GIT_DIR/BISECT_NAMES"
  81 }
  82
  83 bisect_bad() {
  84         bisect_autostart
  85         case "$#" in
  86         0)
  87                 rev=$(git-rev-parse --verify HEAD) ;;
  88         1)
  89                 rev=$(git-rev-parse --verify "$1^{commit}") ;;
  90         *)
  91                 usage ;;
  92         esac || exit
  93         echo "$rev" >"$GIT_DIR/refs/bisect/bad"
  94         echo "# bad: "$(git-show-branch $rev) >>"$GIT_DIR/BISECT_LOG"
  95         echo "git-bisect bad $rev" >>"$GIT_DIR/BISECT_LOG"
  96         bisect_auto_next
  97 }
  98
  99 bisect_good() {
 100         bisect_autostart
 101         case "$#" in
 102         0)    revs=$(git-rev-parse --verify HEAD) || exit ;;
 103         *)    revs=$(git-rev-parse --revs-only --no-flags "$@") &&
 104                 test '' != "$revs" || die "Bad rev input: $@" ;;
 105         esac
 106         for rev in $revs
 107         do
 108                 rev=$(git-rev-parse --verify "$rev^{commit}") || exit
 109                 echo "$rev" >"$GIT_DIR/refs/bisect/good-$rev"
 110                 echo "# good: "$(git-show-branch $rev) >>"$GIT_DIR/BISECT_LOG"
 111                 echo "git-bisect good $rev" >>"$GIT_DIR/BISECT_LOG"
 112         done
 113         bisect_auto_next
 114 }
 115
 116 bisect_next_check() {
 117         next_ok=no
 118         test -f "$GIT_DIR/refs/bisect/bad" &&
 119         case "$(cd "$GIT_DIR" && echo refs/bisect/good-*)" in
 120         refs/bisect/good-\*) ;;
 121         *) next_ok=yes ;;
 122         esac
 123         case "$next_ok,$1" in
 124         no,) false ;;
 125         no,fail)
 126             THEN=''
 127             test -d "$GIT_DIR/refs/bisect" || {
 128                 echo >&2 'You need to start by "git bisect start".'
 129                 THEN='then '
 130             }
 131             echo >&2 'You '$THEN'need to give me at least one good' \
 132                 'and one bad revisions.'
 133             echo >&2 '(You can use "git bisect bad" and' \
 134                 '"git bisect good" for that.)'
 135             exit 1 ;;
 136         *)
 137             true ;;
 138         esac
 139 }
 140
 141 bisect_auto_next() {
 142         bisect_next_check && bisect_next || :
 143 }
 144
 145 bisect_next() {
 146         case "$#" in 0) ;; *) usage ;; esac
 147         bisect_autostart
 148         bisect_next_check fail
 149         bad=$(git-rev-parse --verify refs/bisect/bad) &&
 150         good=$(git-rev-parse --sq --revs-only --not \
 151                 $(cd "$GIT_DIR" && ls refs/bisect/good-*)) &&
 152         rev=$(eval "git-rev-list --bisect $good $bad -- $(cat "$GIT_DIR/BISECT_NAMES")") || exit
 153         if [ -z "$rev" ]; then
 154             echo "$bad was both good and bad"
 155             exit 1
 156         fi
 157         if [ "$rev" = "$bad" ]; then
 158             echo "$rev is first bad commit"
 159             git-diff-tree --pretty $rev
 160             exit 0
 161         fi
 162         nr=$(eval "git-rev-list $rev $good -- $(cat $GIT_DIR/BISECT_NAMES)" | wc -l) || exit
 163         echo "Bisecting: $nr revisions left to test after this"
 164         echo "$rev" > "$GIT_DIR/refs/heads/new-bisect"
 165         git checkout -q new-bisect || exit
 166         mv "$GIT_DIR/refs/heads/new-bisect" "$GIT_DIR/refs/heads/bisect" &&
 167         GIT_DIR="$GIT_DIR" git-symbolic-ref HEAD refs/heads/bisect
 168         git-show-branch "$rev"
 169 }
 170
 171 bisect_visualize() {
 172         bisect_next_check fail
 173         not=`cd "$GIT_DIR/refs" && echo bisect/good-*`
 174         eval gitk bisect/bad --not $not -- $(cat "$GIT_DIR/BISECT_NAMES")
 175 }
 176
 177 bisect_reset() {
 178         case "$#" in
 179         0) if [ -s "$GIT_DIR/head-name" ]; then
 180                branch=`cat "$GIT_DIR/head-name"`
 181            else
 182                branch=master
 183            fi ;;
 184         1) git-show-ref --verify --quiet -- "refs/heads/$1" || {
 185                echo >&2 "$1 does not seem to be a valid branch"
 186                exit 1
 187            }
 188            branch="$1" ;;
 189         *)
 190             usage ;;
 191         esac
 192         if git checkout "$branch"; then
 193                 rm -fr "$GIT_DIR/refs/bisect"
 194                 rm -f "$GIT_DIR/refs/heads/bisect" "$GIT_DIR/head-name"
 195                 rm -f "$GIT_DIR/BISECT_LOG"
 196                 rm -f "$GIT_DIR/BISECT_NAMES"
 197                 rm -f "$GIT_DIR/BISECT_RUN"
 198         fi
 199 }
 200
 201 bisect_replay () {
 202         test -r "$1" || {
 203                 echo >&2 "cannot read $1 for replaying"
 204                 exit 1
 205         }
 206         bisect_reset
 207         while read bisect command rev
 208         do
 209                 test "$bisect" = "git-bisect" || continue
 210                 case "$command" in
 211                 start)
 212                         cmd="bisect_start $rev"
 213                         eval "$cmd"
 214                         ;;
 215                 good)
 216                         echo "$rev" >"$GIT_DIR/refs/bisect/good-$rev"
 217                         echo "# good: "$(git-show-branch $rev) >>"$GIT_DIR/BISECT_LOG"
 218                         echo "git-bisect good $rev" >>"$GIT_DIR/BISECT_LOG"
 219                         ;;
 220                 bad)
 221                         echo "$rev" >"$GIT_DIR/refs/bisect/bad"
 222                         echo "# bad: "$(git-show-branch $rev) >>"$GIT_DIR/BISECT_LOG"
 223                         echo "git-bisect bad $rev" >>"$GIT_DIR/BISECT_LOG"
 224                         ;;
 225                 *)
 226                         echo >&2 "?? what are you talking about?"
 227                         exit 1 ;;
 228                 esac
 229         done <"$1"
 230         bisect_auto_next
 231 }
 232
 233 bisect_run () {
 234     bisect_next_check fail
 235
 236     while true
 237     do
 238       echo "running $@"
 239       "$@"
 240       res=$?
 241
 242       # Check for really bad run error.
 243       if [ $res -lt 0 -o $res -ge 128 ]; then
 244           echo >&2 "bisect run failed:"
 245           echo >&2 "exit code $res from '$@' is < 0 or >= 128"
 246           exit $res
 247       fi
 248
 249       # Use "bisect_good" or "bisect_bad"
 250       # depending on run success or failure.
 251       if [ $res -gt 0 ]; then
 252           next_bisect='bisect_bad'
 253       else
 254           next_bisect='bisect_good'
 255       fi
 256
 257       # We have to use a subshell because bisect_good or
 258       # bisect_bad functions can exit.
 259       ( $next_bisect > "$GIT_DIR/BISECT_RUN" )
 260       res=$?
 261
 262       cat "$GIT_DIR/BISECT_RUN"
 263
 264       if [ $res -ne 0 ]; then
 265           echo >&2 "bisect run failed:"
 266           echo >&2 "$next_bisect exited with error code $res"
 267           exit $res
 268       fi
 269
 270       if grep "is first bad commit" "$GIT_DIR/BISECT_RUN" > /dev/null; then
 271           echo "bisect run success"
 272           exit 0;
 273       fi
 274
 275     done
 276 }
 277
 278
 279 case "$#" in
 280 0)
 281     usage ;;
 282 *)
 283     cmd="$1"
 284     shift
 285     case "$cmd" in
 286     start)
 287         bisect_start "$@" ;;
 288     bad)
 289         bisect_bad "$@" ;;
 290     good)
 291         bisect_good "$@" ;;
 292     next)
 293         # Not sure we want "next" at the UI level anymore.
 294         bisect_next "$@" ;;
 295     visualize)
 296         bisect_visualize "$@" ;;
 297     reset)
 298         bisect_reset "$@" ;;
 299     replay)
 300         bisect_replay "$@" ;;
 301     log)
 302         cat "$GIT_DIR/BISECT_LOG" ;;
 303     run)
 304         bisect_run "$@" ;;
 305     *)
 306         usage ;;
 307     esac
 308 esac