[rrdtool.git] / doc / cdeftutorial.pod

=head1 NAME

cdeftutorial - Alex van den Bogaerdt's CDEF tutorial

=head1 DESCRIPTION

If you provide a question, I will try to provide an answer in the next
release of this tutorial. No feedback equals no changes! Additions to this document are also welcome.
-- Alex van den Bogaerdt E<lt>alex@ergens.op.het.netE<gt>

=head2 Why this tutorial ?

One of the powerful parts of RRDtool is its ability to do all sorts
of calculations on the data retrieved from it's databases. However
RRDtool's many options and syntax make it difficult for the average
user to understand. The manuals are good at explaining what these
options do; however they do not (and should not) explain in detail
why they are useful. As with my RRDtool tutorial: if you want a
simple document in simple language you should read this tutorial.
If you are happy with the official documentation, you may find this
document too simple or even boring. If you do choose to read this
tutorial, I also expect you to have read and fully understand my
other tutorial. 

=head2 More reading

If you have difficulties with the way I try to explain it please read
Steve Rader's L<rpntutorial>. It may help you understand how this all works.

=head1 What are CDEFs ?

When retrieving data from an RRD, you are using a "DEF" to work with
that data. Think of it as a variable that changes over time (where
time is the x-axis). The value of this variable is what is found in
the database at that particular time and you can't do any
modifications on it. This is what CDEFs are for: they takes values
from DEFs and perform calculations on them.

=head1 Syntax

   DEF:var_name_1=some.rrd:ds_name:CF
   CDEF:var_name_2=RPN_expression

You first define "var_name_1" to be data collected from data source
"ds_name" found in RRD "some.rrd" with consolidation function "CF".

Assume the ifInOctets SNMP counter is saved in mrtg.rrd as the DS "in".
Then the following DEF defines a variable for the average of that
data source:

   DEF:inbytes=mrtg.rrd:in:AVERAGE

Say you want to display bits per second (instead of bytes per second
as stored in the database.)  You have to define a calculation
(hence "CDEF") on variable "inbytes" and use that variable (inbits)
instead of the original:

   CDEF:inbits=inbytes,8,*

It tells to multiply inbytes by eight to get inbits. I'll explain later
how this works. In the graphing or printing functions, you can now use
inbits where you would use inbytes otherwise.

Note that variable in the CDEF (inbits) must not be the same as the
variable (inbytes) in the DEF!

=head1 RPN-expressions

RPN is short-hand for Reverse Polish Notation. It works as follows.
You put the variables or numbers on a stack. You also put operations
(things-to-do) on the stack and this stack is then processed. The result
will be placed on the stack. At the end, there should be exactly one
number left: the outcome of the series of operations. If there is not
exactly one number left, RRDtool will complain loudly.

Above multiplication by eight will look like:

=over 4

=item 1.

Start with an empty stack

=item 2.

Put the content of variable inbytes on the stack

=item 3.

Put the number eight on the stack

=item 4.

Put the operation multiply on the stack

=item 5.

Process the stack

=item 6.

Retrieve the value from the stack and put it in variable inbits

=back

We will now do an example with real numbers. Suppose the variable
inbytes would have value 10, the stack would be:

=over 4

=item 1.

||

=item 2.

|10|

=item 3.

|10|8|

=item 4.

|10|8|*|

=item 5.

|80|

=item 6.

||

=back 

Processing the stack (step 5) will retrieve one value from the stack
(from the right at step 4). This is the operation multiply and this
takes two values off the stack as input. The result is put back on the
stack (the value 80 in this case). For multiplication the order doesn't
matter but for other operations like subtraction and division it does.
Generally speaking you have the following order:

   y = A - B  -->  y=minus(A,B)  -->  CDEF:y=A,B,-

This is not very intuitive (at least most people don't think so). For
the function f(A,B) you reverse the position of "f" but you do not
reverse the order of the variables. 

=head1 Converting your wishes to RPN

First, get a clear picture of what you want to do. Break down the problem
in smaller portions until they cannot be split anymore. Then it is rather
simple to convert your ideas into RPN.

Suppose you have several RRDs and would like to add up some counters in
them. These could be, for instance, the counters for every WAN link you
are monitoring.

You have:

   router1.rrd with link1in link2in
   router2.rrd with link1in link2in
   router3.rrd with link1in link2in

Suppose you would like to add up all these counters, except for link2in
inside router2.rrd. You need to do:

(in this example, "router1.rrd:link1in" means the DS link1in inside the
RRD router1.rrd)

   router1.rrd:link1in
   router1.rrd:link2in
   router2.rrd:link1in
   router3.rrd:link1in
   router3.rrd:link2in 
   --------------------   +
   (outcome of the sum)

As a mathematical function, this could be written:

C<add(router1.rrd:link1in , router1.rrd:link2in , router2.rrd:link1in , router3.rrd:link1in , router3.rrd:link2.in)>

With RRDtool and RPN, first, define the inputs:

   DEF:a=router1.rrd:link1in:AVERAGE
   DEF:b=router1.rrd:link2in:AVERAGE
   DEF:c=router2.rrd:link1in:AVERAGE
   DEF:d=router3.rrd:link1in:AVERAGE
   DEF:e=router3.rrd:link2in:AVERAGE

Now, the mathematical function becomes: C<add(a,b,c,d,e)>

In RPN, there's no operator that sums more than two values so you need
to do several additions. You add a and b, add c to the result, add d
to the result and add e to the result.

   push a:         a     stack contains the value of a
   push b and add: b,+   stack contains the result of a+b
   push c and add: c,+   stack contains the result of a+b+c
   push d and add: d,+   stack contains the result of a+b+c+d
   push e and add: e,+   stack contains the result of a+b+c+d+e

What was calculated here would be written down as:

   ( ( ( (a+b) + c) + d) + e) >

This is in RPN:  C<CDEF:result=a,b,+,c,+,d,+,e,+>

This is correct but it can be made more clear to humans. It does
not matter if you add a to b and then add c to the result or first
add b to c and then add a to the result. This makes it possible to
rewrite the RPN into C<CDEF:result=a,b,c,d,e,+,+,+,+> which is
evaluated differently: 

   push value of variable a on the stack: a
   push value of variable b on the stack: a b
   push value of variable c on the stack: a b c
   push value of variable d on the stack: a b c d
   push value of variable e on the stack: a b c d e
   push operator + on the stack:          a b c d e +
   and process it:                        a b c P   (where P == d+e)
   push operator + on the stack:          a b c P +
   and process it:                        a b Q     (where Q == c+P)
   push operator + on the stack:          a b Q +
   and process it:                        a R       (where R == b+Q)
   push operator + on the stack:          a R +
   and process it:                        S         (where S == a+R)

As you can see the RPN expression C<a,b,c,d,e,+,+,+,+,+> will evaluate in
C<((((d+e)+c)+b)+a)> and it has the same outcome as C<a,b,+,c,+,d,+,e,+> 
According to Steve Rader this is called the commutative law of addition
but you may forget this right away, as long as you remember what it
represents.

Now look at an expression that contains a multiplication:

First in normal math: C<let result = a+b*c>. In this case you can't
choose the order yourself, you have to start with the multiplication
and then add a to it. You may alter the position of b and c, you may
not alter the position of a and b. 

You have to take this in consideration when converting this expression
into RPN. Read it as: "Add the outcome of b*c to a" and then it is
easy to write the RPN expression: C<result=a,b,c,*,+>
Another expression that would return the same: C<result=b,c,*,a,+>

In normal math, you may encounter something like "a*(b+c)" and this
can also be converted into RPN. The parenthesis just tell you to first
add b and c, and then multiply a with the result. Again, now it is
easy to write it in RPN: C<result=a,b,c,+,*>. Note that this is very
similar to one of the expressions in the previous paragraph, only the
multiplication and the addition changed places.

When you have problems with RPN or when RRDtool is complaining, it's 
usually a Good Thing to write down the stack on a piece of paper
and see what happens. Have the manual ready and pretend to be RRDtool.
Just do all the math by hand to see what happens, I'm sure this will
solve most, if not all, problems you encounter.

=head1 Some special numbers

=head2 The unknown value

Sometimes collecting your data will fail. This can be very common,
especially when querying over busy links. RRDtool can be configured
to allow for one (or even more) unknown value and calculate the missing
update. You can, for instance, query your device every minute. This is
creating one so called PDP or primary data point per minute. If you
defined your RRD to contain an RRA that stores 5-minute values, you need
five of those PDPs to create one CDP (consolidated data point).
These PDPs can become unknown in two cases:

=over 4

=item 1.

The updates are too far apart. This is tuned using the "heartbeat" setting

=item 2.

The update was set to unknown on purpose by inserting no value (using the
template option) or by using "U" as the value to insert.

=back

When a CDP is calculated, another mechanism determines if this CDP is valid
or not. If there are too many PDPs unknown, the CDP is unknown as well.
This is determined by the xff factor. Please note that one unknown counter
update can result in two unknown PDPs! If you only allow for one unknown
PDP per CDP, this makes the CDP go unknown!

Suppose the counter increments with one per second and you retrieve it
every minute:

   counter value    resulting rate
   10000
   10060            1; (10060-10000)/60 == 1
   10120            1; (10120-10060)/60 == 1
   unknown          unknown; you don't know the last value
   10240            unknown; you don't know the previous value
   10300            1; (10300-10240)/60 == 1

If the CDP was to be calculated from the last five updates, it would get
two unknown PDPs and three known PDPs. If xff would have been set to 0.5
which by the way is a commonly used factor, the CDP would have a known
value of 1. If xff would have been set to 0.2 then the resulting CDP
would be unknown.

You have to decide the proper values for heartbeat, number of PDPs per
CDP and the xff factor. As you can see from the previous text they define
the behavior of your RRA.

=head2 Working with unknown data in your database

As you have read in the previous chapter, entries in an RRA can be
set to the unknown value. If you do calculations with this type of
value, the result has to be unknown too. This means that an expression
such as C<result=a,b,+> will be unknown if either a or b is unknown.
It would be wrong to just ignore the unknown value and return the value
of the other parameter. By doing so, you would assume "unknown" means "zero"
and this is not true.

There has been a case where somebody was collecting data for over a year.
A new piece of equipment was installed, a new RRD was created and the
scripts were changed to add a counter from the old database and a counter
from the new database. The result was disappointing, a large part of
the statistics seemed to have vanished mysteriously ...
They of course didn't, values from the old database (known values) were
added to values from the new database (unknown values) and the result was
unknown.

In this case, it is fairly reasonable to use a CDEF that alters unknown
data into zero. The counters of the device were unknown (after all, it
wasn't installed yet!) but you know that the data rate through the device
had to be zero (because of the same reason: it was not installed).

There are some examples further on that make this change.

=head2 Infinity

Infinite data is another form of a special number. It cannot be graphed
because by definition you would never reach the infinite value. You could
think of positive and negative infinity (I'm not sure if mathematicians
will agree) depending on the position relative to zero.

RRDtool is capable of representing (-not- graphing!) infinity by stopping
at its current maximum (for positive infinity) or minimum (for negative
infinity) without knowing this maximum (minimum).

Infinity in RRDtool is mostly used to draw an AREA without knowing its
vertical dimensions. You can think of it as drawing an AREA with an
infinite height and displaying only the part that is visible in the
current graph. This is probably a good way to approximate infinity
and it sure allows for some neat tricks. See below for examples.

=head2 Working with unknown data and infinity

Sometimes you would like to discard unknown data and pretend it is zero
(or any other value for that matter) and sometimes you would like to
pretend that known data is unknown (to discard known-to-be-wrong data).
This is why CDEFs have support for unknown data. There are also examples
available that show unknown data by using infinity.

=head1 Some examples

=head2 Example: using a recently created RRD

You are keeping statistics on your router for over a year now. Recently
you installed an extra router and you would like to show the combined
throughput for these two devices.

If you just add up the counters from router.rrd and router2.rrd, you
will add known data (from router.rrd) to unknown data (from router2.rrd) for
the bigger part of your stats. You could solve this in a few ways:

=over 4

=item *

While creating the new database, fill it with zeros from the start to now.
You have to make the database start at or before the least recent time in
the other database.

=item *

Alternately you could use CDEF and alter unknown data to zero.

=back

Both methods have their pros and cons. The first method is troublesome and
if you want to do that you have to figure it out yourself. It is not
possible to create a database filled with zeros, you have to put them in
on purpose. Implementing the second method is described next:

What we want is: "if the value is unknown, replace it with zero". This
could be written in pseudo-code as:  if (value is unknown) then (zero)
else (value). When reading the L<rrdgraph> manual you notice the "UN"
function that returns zero or one. You also notice the "IF" function
that takes zero or one as input.

First look at the "IF" function. It takes three values from the stack,
the first value is the decision point, the second value is returned to
the stack if the evaluation is "true" and if not, the third value is
returned to the stack. We want the "UN" function to decide what happens
so we combine those two functions in one CDEF.

Lets write down the two possible paths for the "IF" function:

   if true  return a
   if false return b

In RPN:  C<result=x,a,b,IF> where "x" is either true or false.

Now we have to fill in "x", this should be the "(value is unknown)" part
and this is in RPN:  C<result=value,UN>

We now combine them: C<result=value,UN,a,b,IF> and when we fill in the
appropriate things for "a" and "b" we're finished:

C<CDEF:result=value,UN,0,value,IF>

You may want to read Steve Rader's RPN guide if you have difficulties
with the way I explained this last example.

If you want to check this RPN expression, just mimic RRDtool behavior:

   For any known value, the expression evaluates as follows:
   CDEF:result=value,UN,0,value,IF  (value,UN) is not true so it becomes 0
   CDEF:result=0,0,value,IF         "IF" will return the 3rd value
   CDEF:result=value                The known value is returned

   For the unknown value, this happens:
   CDEF:result=value,UN,0,value,IF  (value,UN) is true so it becomes 1
   CDEF:result=1,0,value,IF         "IF" sees 1 and returns the 2nd value
   CDEF:result=0                    Zero is returned

Of course, if you would like to see another value instead of zero, you
can use that other value.

Eventually, when all unknown data is removed from the RRD, you may want
to remove this rule so that unknown data is properly displayed.

=head2 Example: better handling of unknown data, by using time

Above example has one drawback. If you do log unknown data in
your database after installing your new equipment, it will also be
translated into zero and therefore you won't see that there was a
problem. This is not good and what you really want to do is:

=over 4

=item *

If there is unknown data, look at the time that this sample was taken

=item *

If the unknown value is before time xxx, make it zero

=item *

If it is after time xxx, leave it as unknown data

=back

This is doable: you can compare the time that the sample was taken
to some known time. Assuming you started to monitor your device on
Friday September 17, 00:35:57 MET DST. Translate this time in seconds
since 1970-01-01 and it becomes 937521357. If you process unknown values
that were received after this time, you want to leave them unknown and
if they were "received" before this time, you want to translate them
into zero (so you can effectively ignore them while adding them to your
other routers counters).

Translating Friday September 17, 00:35:57 MET DST into 937521357 can
be done by, for instance, using gnu date:

   date -d "19990917 00:35:57" +%s

You could also dump the database and see where the data starts to be
known. There are several other ways of doing this, just pick one.

Now we have to create the magic that allows us to process unknown
values different depending on the time that the sample was taken.
This is a three step process:

=over 4

=item 1.

If the timestamp of the value is after 937521357, leave it as is

=item 2.

If the value is a known value, leave it as is

=item 3.

Change the unknown value into zero.

=back

Lets look at part one:

    if (true) return the original value

We rewrite this:

    if (true) return "a"
    if (false) return "b"

We need to calculate true or false from step 1. There is a function
available that returns the timestamp for the current sample. It is
called, how surprisingly, "TIME". This time has to be compared to
a constant number, we need "GT". The output of "GT" is true or false
and this is good input to "IF". We want "if (time > 937521357) then
(return a) else (return b)".

This process was already described thoroughly in the previous chapter
so lets do it quick:

   if (x) then a else b
      where x represents "time>937521357"
      where a represents the original value
      where b represents the outcome of the previous example
      
   time>937521357       --> TIME,937521357,GT

   if (x) then a else b --> x,a,b,IF
   substitute x         --> TIME,937521357,GT,a,b,IF
   substitute a         --> TIME,937521357,GT,value,b,IF
   substitute b         --> TIME,937521357,GT,value,value,UN,0,value,IF,IF

We end up with:
C<CDEF:result=TIME,937521357,GT,value,value,UN,0,value,IF,IF>

This looks very complex however as you can see it was not too hard to
come up with.

=head2 Example: Pretending weird data isn't there

Suppose you have a problem that shows up as huge spikes in your graph.
You know this happens and why so you decide to work around the problem.
Perhaps you're using your network to do a backup at night and by doing
so you get almost 10mb/s while the rest of your network activity does
not produce numbers higher than 100kb/s.

There are two options:

=over 4

=item 1.

If the number exceeds 100kb/s it is wrong and you want it masked out
by changing it into unknown

=item 2.

You don't want the graph to show more than 100kb/s

=back

Pseudo code: if (number > 100) then unknown else number
or
Pseudo code: if (number > 100) then 100 else number.

The second "problem" may also be solved by using the rigid option of
RRDtool graph, however this has not the same result. In this example
you can end up with a graph that does autoscaling. Also, if you use
the numbers to display maxima they will be set to 100kb/s.

We use "IF" and "GT" again. "if (x) then (y) else (z)" is written
down as "CDEF:result=x,y,z,IF"; now fill in x, y and z.
For x you fill in "number greater than 100kb/s" becoming
"number,100000,GT" (kilo is 1000 and b/s is what we measure!).
The "z" part is "number" in both cases and the "y" part is either
"UNKN" for unknown or "100000" for 100kb/s.

The two CDEF expressions would be:

    CDEF:result=number,100000,GT,UNKN,number,IF
    CDEF:result=number,100000,GT,100000,number,IF

=head2 Example: working on a certain time span

If you want a graph that spans a few weeks, but would only want to
see some routers data for one week, you need to "hide" the rest of
the time frame. Don't ask me when this would be useful, it's just
here for the example :)

We need to compare the time stamp to a begin date and an end date.
Comparing isn't difficult:

        TIME,begintime,GE
        TIME,endtime,LE

These two parts of the CDEF produce either 0 for false or 1 for true.
We can now check if they are both 0 (or 1) using a few IF statements
but, as Wataru Satoh pointed out, we can use the "*" or "+" functions
as logical AND and logical OR.

For "*", the result will be zero (false) if either one of the two
operators is zero.  For "+", the result will only be false (0) when
two false (0) operators will be added.  Warning: *any* number not
equal to 0 will be considered "true". This means that, for instance,
"-1,1,+" (which should be "true or true") will become FALSE ...
In other words, use "+" only if you know for sure that you have positive
numbers (or zero) only.

Let's compile the complete CDEF:

        DEF:ds0=router1.rrd:AVERAGE
        CDEF:ds0modified=TIME,begintime,GE,TIME,endtime,LE,*,UNKN,ds0,IF

This will return the value of ds0 if both comparisons return true. You
could also do it the other way around:

        DEF:ds0=router1.rrd:AVERAGE
        CDEF:ds0modified=TIME,begintime,LT,TIME,endtime,GT,+,UNKN,ds0,IF

This will return an UNKNOWN if either comparison returns true.

=head2 Example: You suspect to have problems and want to see unknown data.

Suppose you add up the number of active users on several terminal servers.
If one of them doesn't give an answer (or an incorrect one) you get "NaN"
in the database ("Not a Number") and NaN is evaluated as Unknown.

In this case, you would like to be alerted to it and the sum of the
remaining values is of no value to you.

It would be something like:

    DEF:users1=location1.rrd:onlineTS1:LAST
    DEF:users2=location1.rrd:onlineTS2:LAST
    DEF:users3=location2.rrd:onlineTS1:LAST
    DEF:users4=location2.rrd:onlineTS2:LAST
    CDEF:allusers=users1,users2,users3,users4,+,+,+

If you now plot allusers, unknown data in one of users1..users4 will
show up as a gap in your graph. You want to modify this to show a
bright red line, not a gap.

Define an extra CDEF that is unknown if all is okay and is infinite if
there is an unknown value:

    CDEF:wrongdata=allusers,UN,INF,UNKN,IF

"allusers,UN" will evaluate to either true or false, it is the (x) part
of the "IF" function and it checks if allusers is unknown.
The (y) part of the "IF" function is set to "INF" (which means infinity)
and the (z) part of the function returns "UNKN".

The logic is: if (allusers == unknown) then return INF else return UNKN.

You can now use AREA to display this "wrongdata" in bright red. If it
is unknown (because allusers is known) then the red AREA won't show up.
If the value is INF (because allusers is unknown) then the red AREA will
be filled in on the graph at that particular time.

   AREA:allusers#0000FF:combined user count
   AREA:wrongdata#FF0000:unknown data

=head2 Same example useful with STACKed data:

If you use stack in the previous example (as I would do) then you don't
add up the values. Therefore, there is no relationship between the
four values and you don't get a single value to test.
Suppose users3 would be unknown at one point in time: users1 is plotted,
users2 is stacked on top of users1, users3 is unknown and therefore
nothing happens, users4 is stacked on top of users2.
Add the extra CDEFs anyway and use them to overlay the "normal" graph:

   DEF:users1=location1.rrd:onlineTS1:LAST
   DEF:users2=location1.rrd:onlineTS2:LAST
   DEF:users3=location2.rrd:onlineTS1:LAST
   DEF:users4=location2.rrd:onlineTS2:LAST
   CDEF:allusers=users1,users2,users3,users4,+,+,+
   CDEF:wrongdata=allusers,UN,INF,UNKN,IF
   AREA:users1#0000FF:users at ts1
   STACK:users2#00FF00:users at ts2
   STACK:users3#00FFFF:users at ts3
   STACK:users4#FFFF00:users at ts4
   AREA:wrongdata#FF0000:unknown data

If there is unknown data in one of users1..users4, the "wrongdata" AREA
will be drawn and because it starts at the X-axis and has infinite height
it will effectively overwrite the STACKed parts.

You could combine the two CDEF lines into one (we don't use "allusers")
if you like.  But there are good reasons for writing two CDEFS:

=over 4

=item *

It improves the readability of the script

=item *

It can be used inside GPRINT to display the total number of users

=back

If you choose to combine them, you can substitute the "allusers" in the
second CDEF with the part after the equal sign from the first line:

   CDEF:wrongdata=users1,users2,users3,users4,+,+,+,UN,INF,UNKN,IF

If you do so, you won't be able to use these next GPRINTs:

   COMMENT:"Total number of users seen"
   GPRINT:allusers:MAX:"Maximum: %6.0lf"
   GPRINT:allusers:MIN:"Minimum: %6.0lf"
   GPRINT:allusers:AVERAGE:"Average: %6.0lf"
   GPRINT:allusers:LAST:"Current: %6.0lf\n"

=head1 The examples from the RRD graph manual page

=head2 Degrees Celsius vs. Degrees Fahrenheit

   rrdtool graph demo.png --title="Demo Graph" \
      DEF:cel=demo.rrd:exhaust:AVERAGE \
      CDEF:far=cel,32,-,0.55555,* \
      LINE2:cel#00a000:"D. Celsius" \
      LINE2:far#ff0000:"D. Fahrenheit\c"

This example gets the DS called "exhaust" from database "demo.rrd"
and puts the values in variable "cel". The CDEF used is evaluated
as follows:

   CDEF:far=cel,32,-,0.5555,*
   1. push variable "cel"
   2. push 32
   3. push function "minus" and process it
      The stack now contains values that are 32 less than "cel"
   4. push 0.5555
   5. push function "multiply" and process it
   6. the resulting value is now "(cel-32)*0.55555"

Note that if you take the Celsius to Fahrenheit function you should
be doing "5/9*(cel-32)" so 0.55555 is not exactly correct. It is close
enough for this purpose and it saves a calculation.

=head2 Changing unknown into zero

   rrdtool graph demo.png --title="Demo Graph" \
      DEF:idat1=interface1.rrd:ds0:AVERAGE \
      DEF:idat2=interface2.rrd:ds0:AVERAGE \
      DEF:odat1=interface1.rrd:ds1:AVERAGE \
      DEF:odat2=interface2.rrd:ds1:AVERAGE \
      CDEF:agginput=idat1,UN,0,idat1,IF,idat2,UN,0,idat2,IF,+,8,* \
      CDEF:aggoutput=odat1,UN,0,odat1,IF,odat2,UN,0,odat2,IF,+,8,* \
      AREA:agginput#00cc00:Input Aggregate \
      LINE1:aggoutput#0000FF:Output Aggregate

These two CDEFs are built from several functions. It helps to
split them when viewing what they do.
Starting with the first CDEF we would get:
      idat1,UN --> a
      0        --> b
      idat1    --> c
      if (a) then (b) else (c)
The result is therefore "0" if it is true that "idat1" equals "UN".
If not, the original value of "idat1" is put back on the stack.
Lets call this answer "d". The process is repeated for the next
five items on the stack, it is done the same and will return answer
"h". The resulting stack is therefore "d,h".
The expression has been simplified to "d,h,+,8,*" and it will now be
easy to see that we add "d" and "h", and multiply the result with eight.

The end result is that we have added "idat1" and "idat2" and in the
process we effectively ignored unknown values. The result is multiplied
by eight, most likely to convert bytes/s to bits/s.

=head2 Infinity demo

   rrdtool graph example.png --title="INF demo" \
      DEF:val1=some.rrd:ds0:AVERAGE \
      DEF:val2=some.rrd:ds1:AVERAGE \
      DEF:val3=some.rrd:ds2:AVERAGE \
      DEF:val4=other.rrd:ds0:AVERAGE \
      CDEF:background=val4,POP,TIME,7200,%,3600,LE,INF,UNKN,IF \
      CDEF:wipeout=val1,val2,val3,val4,+,+,+,UN,INF,UNKN,IF \
      AREA:background#F0F0F0 \
      AREA:val1#0000FF:Value1 \
      STACK:val2#00C000:Value2 \
      STACK:val3#FFFF00:Value3 \
      STACK:val4#FFC000:Value4 \
      AREA:whipeout#FF0000:Unknown

This demo demonstrates two ways to use infinity. It is a bit tricky
to see what happens in the "background" CDEF.

   "val4,POP,TIME,7200,%,3600,LE,INF,UNKN,IF"

This RPN takes the value of "val4" as input and then immediately
removes it from the stack using "POP". The stack is now empty but
as a side result we now know the time that this sample was taken.
This time is put on the stack by the "TIME" function.

"TIME,7200,%" takes the modulo of time and 7200 (which is two hours).
The resulting value on the stack will be a number in the range from
0 to 7199.

For people who don't know the modulo function: it is the remainder
after an integer division. If you divide 16 by 3, the answer would
be 5 and the remainder would be 1. So, "16,3,%" returns 1.

We have the result of "TIME,7200,%" on the stack, lets call this
"a". The start of the RPN has become "a,3600,LE" and this checks
if "a" is less or equal than "3600". It is true half of the time.
We now have to process the rest of the RPN and this is only a simple
"IF" function that returns either "INF" or "UNKN" depending on the
time. This is returned to variable "background".

The second CDEF has been discussed earlier in this document so we
won't do that here.

Now you can draw the different layers. Start with the background
that is either unknown (nothing to see) or infinite (the whole
positive part of the graph gets filled).
Next you draw the data on top of this background. It will overlay
the background. Suppose one of val1..val4 would be unknown, in that
case you end up with only three bars stacked on top of each other.
You don't want to see this because the data is only valid when all
four variables are valid. This is why you use the second CDEF, it
will overlay the data with an AREA so the data cannot be seen anymore.

If your data can also have negative values you also need to overwrite
the other half of your graph. This can be done in a relatively simple
way: what you need is the "wipeout" variable and place a negative
sign before it:  "CDEF:wipeout2=wipeout,-1,*"
    
=head2 Filtering data

You may do some complex data filtering:

  MEDIAN FILTER: filters shot noise

    DEF:var=database.rrd:traffic:AVERAGE
    CDEF:prev1=PREV(var)
    CDEF:prev2=PREV(prev1)
    CDEF:prev3=PREV(prev2)
    CDEF:median=prev1,prev2,prev3,+,+,3,/
    LINE3:median#000077:filtered
    LINE1:prev2#007700:'raw data'


  DERIVATE:

    DEF:var=database.rrd:traffic:AVERAGE
    CDEF:prev1=PREV(var)
    CDEF:time=TIME
    CDEF:prevtime=PREV(time)
    CDEF:derivate=var,prev1,-,time,prevtime,-,/
    LINE3:derivate#000077:derivate
    LINE1:var#007700:'raw data'


=head1 Out of ideas for now

This document was created from questions asked by either myself or
by other people on the list. Please let me know if you find errors
in it or if you have trouble understanding it. If you think there
should be an addition, mail me: E<lt>alex@ergens.op.het.netE<gt>

Remember: B<No feedback equals no changes!>

=head1 SEE ALSO

The RRDtool manpages

=head1 AUTHOR

Alex van den Bogaerdt
E<lt>alex@ergens.op.het.netE<gt>