[pkg-collectd.git] / debian / changelog

collectd (4.10.7-1) unstable; urgency=low

  * New upstream release.
    - Fixed an endless loop in case the datadir is a symlink pointing to a
      non-existent target; thanks to Michael Prokop for reporting this and
      Jonathan Nieder for providing the patch (Closes: #619123).
  * debian/patches/:
    - Removed ipvs_h_include.dpatch -- applied upstream.
  * debian/rules:
    - Use dpkg-buildflags to determine compiler/linker flags; this also
      enables hardening build flags; thanks to Moritz Muehlenhoff for
      providing the patch (Closes: #656271).
    - Don't force building of the ipvs plugin. The ip_vs.h check has been
      fixed in configure.
    - Use /usr/share/javahelper/java-arch.sh to determine the Java
      architecture directory, thus, making sure armhf and armel are supported
      as well; thanks to peter green for reporting this and providing the
      pointer (Closes: #656274).
    - Work around #673431 (kvm.h requires sys/types.h) by forcing the processes
      plugin on kfreebsd and manually defining HAVE_STRUCT_KINFO_PROC_FREEBSD.
  * debian/README.Debian:
    - Added section 'Cleanup of old data' explaining how to get rid of
      out-dated data files (e.g. RRD files).
  * debian/control:
    - Updated to standards-version 3.9.3 -- no changes.
    - Build depend on javahelper providing java-arch.sh.
    - Use linux-any, kfreebsd-any, etc. rather than hardcoded list of
      non-Linux architectures to make life of porters easier; thanks to Robert
      Millan for reporting this and providing a pointer to the fix
      (Closes: #634690).
  * debian/collectd-core.postrm, debian/collectd-core.templates:
    - Prompt the user (debconf priority high) when purging the collected data
      providing an option to opt out. The question defaults to remove the
      data; thanks to Trent W. Buck for reporting and discussing this
      (Closes: #631167).
  * debian/collectd-core.collectd.init.d:
    - Added cpufrequtils to should-start, else collectd does not reliably
      detect all CPUs; thanks to Mathias Bauer for reporting and debugging
      this (Closes: #662040).
    - Use the exit codes specified by LSB in 'status' command; thanks to
      Michael Prokop for reporting this (Closes: #615840).
  * debian/po/:
    - Added Danish debconf template translation; thanks to Joe Dalton
      (Closes: #660918).
    - Added Brazilian Portuguese debconf template translation; thanks to
      Adriano Rafael Gomes (Closes: #662174).
    - Added Polish debconf template translation; thanks to Michał Kułach
      (Closes: #672739).

 -- Sebastian Harl <tokkee@debian.org>  Thu, 17 May 2012 15:55:39 +0200

collectd (4.10.4-1) unstable; urgency=low

  * New upstream release.
    - Added support for Yajl version 2; thanks to John Stamp for reporting
      this (Closes: #653879).
    - collectd.conf(5) now documents the "Globals" config option and that this
      is required for the "perl" and "python" plugins; thanks to Jeff Green
      for reporting this (Closes: #612784).
    - Be more verbose about why loading a plugin fails; thanks to Martin
      Steigerwald for reporting this (Closes: #585975).
    - Don't abort if including a config file fails; thanks to Reinhard Tartler
      for reporting this (Closes: #592880).
    - Fixed FTBFS with GCC 4.6; thanks to Matthias Klose for reporting this
      and Peter Green and Colin Watson for providing patches
      (Closes: #625323).
    - Added support for libnotify 0.7; thanks to Michael Biebl for reporting
      this (Closes: #636818).
    - Fixed FTBFS with current libiptc; thanks to Lucas Nussbaum for reporting
      this (Closes: #614439).
  * debian/patches:
    - Removed bts595756-notify_email-segfault -- included upstream.
    - Removed bts592623-curl_json-file -- included upstream.
    - Removed bts596128-reheap-fix -- included upstream.
    - Removed CVE-2010-4336 -- included upstream.
  * debian/rules:
    - Append DEB_BUILD_ARCH to JAVA_HOME; this is how it's done in the OpenJDK
      package.
    - Split 'build' target into 'build-arch' and 'build-indep' as recommended
      by policy.
  * debian/patches/ipvs_h_include, debian/rules:
    - Let the ipvs plugin use linux/ip_vs.h rather than net/ip_vs.h. Also,
      make sure to look for the header in /usr/include rather than the kernel
      directory (which has been deprecated).
    - Force building of the ipvs plugin since configure is not currently able
      to correctly check for ip_vs.h.
  * debian/control:
    - Updated standards-version to 3.9.2 -- no changes.
  * debian/collectd-core.collectd.init.d:
    - Added a description LSB header field.
  * debian/collectd-core.overrides:
    - Updated entry for java's binary-or-shlib-defines-rpath.

 -- Sebastian Harl <tokkee@debian.org>  Mon, 09 Jan 2012 16:10:58 +0100

collectd (4.10.1-2.1) unstable; urgency=high

  * Non-maintainer upload by the security team
  * Fix DoS in RRD file creation (Closes: #605092)
    Fixes: CVE-2010-4336
    Thanks to Florian Forster

 -- Steffen Joeris <white@debian.org>  Wed, 08 Dec 2010 17:45:50 +1100

collectd (4.10.1-2) unstable; urgency=medium

  * debian/rules:
    - Added support for ‘powerpcspe’ to the Java arch mapping; thanks to
      Sebastian Andrzej Siewior for the patch (Closes: #592909).
  * debian/patches:
    - Added bts595756-notify_email-segfault -- upstream patch fixing a
      segfault in the 'notify_email' plugin; thanks to Manuel CISSE for
      reporting this (Closes: #595756).
    - Added bts592623-curl_json-file -- upstream patch fixing access to
      file:// URLs in the 'curl_json' plugin; thanks Baptiste Mille-Mathias
      for reporting this and pointing out the patch (Closes: #592623).
    - Added bts596128-reheap-fix -- upstream patch fixing the 'reheap()'
      function used to manage the "read" callbacks and making sure all plugins
      get executed correctly and in each interval (Closes: #596128).
  * Set urgency to "medium" because of the RC bug-fix.

 -- Sebastian Harl <tokkee@debian.org>  Wed, 08 Sep 2010 22:50:54 +0200

collectd (4.10.1-1) unstable; urgency=low

  * New upstream release.
  * debian/patches:
    - Removed bts561577_collectd2html_recursive_fix -- applied upstream.
    - Removed bts575029-collectd2html-xhtml -- applied upstream.
    - Removed bts557599_powerdns_fix -- applied upstream.
  * debian/control:
    - Updated standards-version to 3.9.1 -- no changes.

 -- Sebastian Harl <tokkee@debian.org>  Wed, 28 Jul 2010 18:45:31 +0200

collectd (4.10.0-1) unstable; urgency=low

  * New upstream release:
    New plugins:
    - Parse XML data: curl_xml
    - Parse values from Modbus/TCP enabled devices: modbus (disabled in
      Debian; libmodbus is not available)
    - Timing values from Pinba: pinba
  * debian/control:
    - Build-depend on libprotobuf-c0-dev and protobuf-c-compiler required by
      the 'pinba' plugin.
    - Updated to standards-version 3.8.4 -- no changes.
  * debian/patches:
    - Removed bts566199_collection_hide_types -- applied upstream.
    - Removed typo_fixes -- applied upstream.
    - Added bts575029-collectd2html-xhtml, adding support for XHTML to
      collectd2html.pl; thanks to Ivan Shmakov for reporting this and Max
      Henkel and Timur Kirilichev for providing patches (Closes: #575029).
  * debian/rules:
    - Define (and pass to configure) $JAR, required by current versions of the
      Java bindings.
    - Added support for Renesas SH4 to the Java arch mapping; thanks to
      Nobuhiro Iwamatsu for the patch (Closes: #564165).
  * debian/collectd.postinst:
    - Manually replace /usr/share/doc/collectd/examples/ with a symlink when
      upgrading from versions << 4.10.0-1~ -- this is not handled by dpkg
      according to policy 6.6; thanks to Joey Hess for reporting this
      (Closes: #569268).
  * debian/collectd-core.overrides:
    - Override 'capitalization-error-in-description python Python' -- all
      plugin names are spelled in lower-case letters.

 -- Sebastian Harl <tokkee@debian.org>  Tue, 08 Jun 2010 00:42:56 +0200

collectd (4.9.1-2) unstable; urgency=low

  * debian/rules:
    - Re-enabled non-kfreebsd plugins on i386 and amd64, which had been
      disabled accidentally by using findstring (which does a substring match)
      to compare DEB_BUILD_ARCH with kfreebsd-{amd64,i386}; thanks to ilia
      kudirov for reporting this (Closes: #567259).
    - Replaced all occurrences of 'findstring' with appropriate 'filter'
      statements to make sure to match words rather than substrings.

 -- Sebastian Harl <tokkee@debian.org>  Thu, 28 Jan 2010 22:09:16 +0100

collectd (4.9.1-1) unstable; urgency=low

  * New upstream release:
    New plugins:
    - Number of context switches done by the OS: contextswitch
    - Query statistics from mon.itor.us: Monitorus (Perl based plugin)
    - Collect statistics from NetApp filers: netapp (disabled in Debian;
      libnetapp is not available)
    - OpenVZ statistics: OpenVZ (Perl based plugin)
    - Embedding a Python interpreter: python
    - Query statistics from RouterOS: routeros (disabled in Debian;
      librouteros is not available)
    New matches:
    - Match values using a hash function of the hostname: hashed
    New targets:
    - Scale (multiply) values: scale
  * debian/control:
    - Build-depend on "python-dev", required to build the "python" plugin.
  * debian/collectd-core.install:
    - Install all collectd-*.5 manpages (in particular, this includes the
      newly added collectd-python.5).
  * Added support for kfreebsd-{i386,amd64}; see below for details
    (Closes: #566521).
  * debian/control, debian/rules:
    - Disabled the following Linux-specific plugins / removed the following
      build-deps on kfreebsd-{i386,amd64}:
      + "iptables" plugin / iptables-dev
      + "ipvs" plugin / linux-libc-dev
      + "madwifi" plugin
      + "netlink" plugin / iproute-dev
      + "sensors" plugin / libsensors4-dev
      + "vserver" plugin
    - Disabled the following plugins / removed the following build-deps on
      kfreebsd-{i386,amd64} -- the build-deps are (not yet) available on
      kfreebsd:
      + "gmond" plugin / libganglia1-dev
      + "libvirt" plugin / libvirt-dev
      + "java" plugin / openjdk6-jdk
    - Enabled the "rrdcached" plugin and build-depend on librrd-dev (>= 1.4~)
      (and removed the optional build-dep on librrd2-dev).
    - Enabled the "tokyotyrant" plugin (except on kfreebsd-{i386,amd64}) and
      build-depend on libtokyotyrant-dev (which is not available on kfreebsd).
      Also, build-depend on libtokyocabinet-dev to work around a missing
      dependency in libtokyotyrant-dev (see #566584).
  * debian/rules:
    - Disabled the following plugins on kfreebsd-{i386,amd64} which have not
      yet been ported to FreeBSD: battery, conntrack, contextswitch, cpufreq,
      disk, entropy, fscache, irq, nfs, protocols, serial, thermal, vmem,
      wireless.
    - Simplified Java archdir mapping: removed entries "pointing" to
      themselves and let those default to DEB_BUILD_ARCH.
    - Check whether all patches have been enabled; fail, if not.
  * debian/patches:
    - Added bts566199_collection_hide_types.dpatch -- added ability to hide
      specified types in collection.cgi; thanks to Pavel Piatruk for the patch
      (Closes: #566199).
    - Added typo_fixes.dpatch -- fixing some typos in manpages and error
      messages; thanks to lintian(1) for reporting this.
  * debian/collectd-core.overrides:
    - Replaced overrides for spelling-error-in-description with
      capitalization-error-in-description.

 -- Sebastian Harl <tokkee@debian.org>  Tue, 26 Jan 2010 00:22:32 +0100

collectd (4.8.2-1) unstable; urgency=medium

  * New upstream release:
    - Now using libtool 2.
  * Set urgency to medium because of the fix for #559801.
  * Split the "collectd" binary package into "collectd-core" and "collectd".
    The former provides the main program file and the plugins while the latter
    provides the configuration. This allows for much more flexible setups
    (e.g. providing customizations on top of "collectd-core" without modifying
    the "collectd" package) and, amongst others, removes the hard dependency
    on librrd (Closes: #495936, #544311).
  * debian/collectd-core.collectd.init.d:
    - Do not (try to) start collectd if the config file does not exist. Else,
      installation of "collectd-core" (which does not provide configuration)
      would fail.
  * debian/collectd.postinst:
    - Let the "collectd" package restart the daemon, since it provides the
      config file.
  * debian/collectd.links:
    - Symlink /u/s/d/collectd/examples to /u/s/d/collectd-core/examples.
  * debian/control:
    - Build-depend on the right combination of libsnmp-dev and perl. Perl's
      CFLAGS (included in net-snmp's CFLAGS) introduced '-fstack-protector' in
      version 5.10.1 on some architectures (those supporting that features).
      net-snmp has been fixed to handle that correctly in 5.4.2.1~dfsg-4;
      thanks to Lamont Jones and Dann Frazier for reporting this
      (Closes: #559087).
    - Build-depend on libsensors4-dev rather than libsensors-dev. libsnmp-dev,
      starting with version 5.4.2.1~dfsg-5, supports libsensors4, thus making
      that possible. This restores the full functionality of the "sensors"
      plugin, which does not work well with libsensors3 and lm-sensors-3;
      thanks to Anssi Kolehmainen for reporting this (Closes: #538795).
    - Build-depend on libltdl-dev to make it possible to use the system-wide
      libltdl.
    - No longer conflict/provide/replace the pre-Lenny "collectd-$plugin"
      packages.
    - Update the list of collectd-core's suggestions: added various services
      providing data that may be collected by collectd. Downgraded lm-sensors
      from a recommendation to a suggestion.
  * debian/patches:
    - Removed gmond-fix-compile-error.dpatch -- included upstream.
    - Added bts561577_collectd2html_recursive_fix.dpatch -- fixed
      collectd2html.pl's recursive mode and improved some defaults; thanks to
      Yuri D'Elia for reporting this and providing a patch (Closes: #561577).
    - Added bts557599_powerdns_fix.dpatch -- fixed communication to pdns
      versions 2.9.22 and above; thanks to <tm@iprog.com> for reporting this
      and Luke Heberling for providing the patch (Closes: #557599).
    - Added bts559801_plugin_find_fix.dpatch -- make collectd resistant
      against copies of libltdl affected by CVE-2009-3736. This fixes a
      potential but very unlikely security issue, e.g. found in the embedded
      copy. For details about how collectd might be affected, see
      <http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=559801#15>; thanks to
      Michael Gilbert for reporting this (Closes: #559801).
  * debian/rules:
    - Pass --without-included-ltdl to configure to tell libtool 2 to not use
      the shipped libltdl but rather the one available in the system. Thus,
      in the future, libltdl related issues do no longer require updated
      collectd packages.
    - Pass --disable-static to configure to tell libtool 2 to not build any
      static libraries.
    - Install debian/collectd.conf as an example into "collectd-core".
    - Output the content of config.log if configure fails -- this might help
      debugging.
  * debian/README.Debian:
    - Added a short explanation of the package split.

 -- Sebastian Harl <tokkee@debian.org>  Sat, 26 Dec 2009 12:06:46 +0100

collectd (4.8.1-2) unstable; urgency=low

  * debian/rules:
    - Disabled the "java" plugin on hppa for now to work around a backlog in
      the buildds that currently prevents a transition to testing.
  * debian/control:
    - Do not build-depend on openjdk-6-jdk on hppa.

 -- Sebastian Harl <tokkee@debian.org>  Thu, 19 Nov 2009 10:55:33 +0100

collectd (4.8.1-1) unstable; urgency=medium

  * New upstream release:
    - Fixed a build issue with libiptc that caused a segfault in the iptables
      plugin; thanks to Rodrigo Campos for reporting this (Closes: #535786).
    - Updated the powerdns plugin to support pdns 2.9.22 (and above) as well;
      thanks to Thomas Morgan for reporting this and Luke Heberling for
      providing a patch (Closes: #535787).
    New plugins:
    - Parse JSON files: curl_json
    - Query data from Java processes using JMX: GenericJMX (Java based plugin)
    - Atheros wireless LAN chipset statistics: madwifi
    - Optimized Link State Routing daemon statistics: olsrd
    - Tokyo Tyrant server statistics: tokyotyrant (disabled in Debian,
      libtokyotyrant is not available)
    - Send collected values to a web-server: write_http
    - ZFS Adaptive Replacement Cache statistics: zfs_arc (disabled in Debian,
      libkstat is not available)
    New matches:
    - Match zero COUNTER values: empty_counter
  * Set urgency to medium because of the fix for #535786.
  * debian/rules:
    - Install contrib/GenericJMX.conf to /usr/share/doc/collectd/examples/.
    - Disabled the tokyotyrant and zfs_arc plugins - their dependencies are
      not available.
  * debian/patches:
    - Removed bts535787-powerdns-fix-localsocket.dpatch - included upstream.
    - Removed bts541953-curl-followlocation.dpatch - included upstream.
    - Removed bts542859-df-fix-ignorelist.dpatch - included upstream.
    - Removed java-fix-jvm-start.dpatch - included upstream.
    - Removed libvirt-reconnect.dpatch - included upstream.
    - Removed network-fix-cacheflush.dpatch - included upstream.
    - Removed plugin-fix-unregister.dpatch - included upstream.
    - Added gmond-fix-compile-error.dpatch - upstream patch fixing a compile
      error in the gmond plugin.
  * debian/control:
    - Build depend on libyajl-dev, which is required by the curl_json plugin.
  * Added debian/README.source:
    - The file includes a pointer to /usr/share/doc/dpatch/README.source.gz.
  * New debconf template translations:
    - ja.po, thanks to Hideki Yamane (Closes: #550968).

 -- Sebastian Harl <tokkee@debian.org>  Thu, 15 Oct 2009 20:54:46 +0200

collectd (4.7.2-1) unstable; urgency=low

  * New upstream release (Closes: #541887).
    - collectd2html.pl now supports the creation of SVG images; thanks to Ivan
      Shmakov for providing a patch (Closes: #482185).
    New plugins:
    - Connection tracking table size: conntrack
    - Linux file-system based caching framework statistics: fscache
    - Receive and interpret Ganglia multicast traffic: gmond
    - Embedded Java Virtual Machine: java
    - Query and parse data from a memcache daemon: memcachec
    - Information about network protocols: protocols
    - Parse table-like structured files: table
    - Power consumption measurements from "The Energy Detective" (TED): ted
    - System uptime: uptime
  * debian/rules:
    - Install collectd-unixsock.py to /usr/share/doc/collectd/examples/.
    - Pass CPPFLAGS and CFLAGS as arguments to configure instead of setting
      them in the environment - this is the recommended way.
    - Pass appropriate JAVAC, JAVA_CPPFLAGS and JAVA_LDFLAGS variables to
      configure, using OpenJDK found in /usr/lib/jvm/java-6-openjdk. The
      archdir mapping used by the openjdk-6 Debian package is used to find
      libjvm.so in JAVA_HOME/jre/lib/ARCHDIR/server.
    - Use -rpath to tell the "java" plugin where to find libjvm.so.
    - Pass --enable-all-plugins to configure to make sure that the build fails
      if any prerequisites are missing.
  * debian/control:
    - Build-depend on openjdk-6-jdk.
    - Build-depend on libganglia1-dev (>= 3), required by the gmond plugin.
    - Build-depend on libgcrypt11-dev, used by the network plugin.
    - Updated Standards-Version to 3.8.3 (no changes).
    - Changed build-dependency libmysqlclient15-dev to libmysqlclient-dev -
      this allows transitions to be handled thru binNMUs if possible.
  * debian/collectd.install:
    - Install collectd-java.5.
  * debian/patches:
    - Removed libcollectdclient_static_sstrerror.dpatch - included upstream.
    - Added network-fix-cacheflush.dpatch - upstream patch to fix the handling
      of the 'CacheFlush' config option of the "network" plugin.
    - Added libvirt-reconnect.dpatch - upstream patch to let the "libvirt"
      plugin re-connect to libvirtd if connecting fails.
    - Added plugin-fix-unregister.dpatch - upstream patch to make
      'plugin_unregister_read()' functional again, thus fixing a failed
      assertion in some cases.
    - Added java-fix-jvm-start.dpatch - upstream patch to fix the JVM startup.
    - Added bts541953-curl-followlocation.dpatch - upstream patch to let
      plugins using libcurl follow HTTP redirects; thanks to Joey Hess for
      reporting this (Closes: #541953).
    - Added bts535787-powerdns-fix-localsocket.dpatch - upstream patch fixing
      the handling of the 'LocalSocket' config option of the "powerdns"
      plugin; thanks to Thomas Morgan for reporting this and Luke Heberling
      for providing a patch (references: #535787).
    - Added bts542859-df-fix-ignorelist.dpatch - upstream patch to fix the
      handling of the ignorelist in the "df" plugin; thanks to Joey Hess for
      reporting this (Closes: #542859).
  * debian/README.Debian:
    - Removed the note about how to get collectd2html.pl working with
      version 4 of collectd - the script now supports the --recursive option
      which takes care of that.
  * debian/collectd.overrides:
    - Documented the 'binary-or-shlib-defines-rpath' warning - the rpath is
      required by the "java" plugin.
  * New debconf template translations:
    - cs.po, thanks to Martin Sin (Closes: #534206).
    - ru.po, thanks to Yuri Kozlov (Closes: #539467).
  * debian/control, debian/rules:
    - No not limit the "libvirt" plugin to amd64, i386, powerpc - libvirt-dev
      seems to be available on all architectures now.
    - Reintroduced a work around for #474087 (broken openipmi .pc files) by
      providing a fixed version of OpenIPMIpthread.pc in debian/pkgconfig and
      adding that path to PKG_CONFIG_PATH. Removed the version from the
      libopenipmi-dev build dependency for now.
  * debian/collectd.conf:
    - Set the "apache" plugin's URL according to the default used by Debian's
      Apache; thanks to Joey Hess for reporting this (Closes: #541888).
  * debian/libcollectdclient-dev.install, debian/rules:
    - Do not install libcollectdclient's .la file in favor of the Squeeze
      release goal to remove those files (for details see
      <http://lists.debian.org/debian-devel/2009/08/msg00783.html>).

 -- Sebastian Harl <tokkee@debian.org>  Sat, 29 Aug 2009 12:42:15 +0200

collectd (4.6.3-1) unstable; urgency=low

  * New upstream release.
  * debian/patches:
    - Removed battery_acpi_complain.dpatch - included upstream.
    - Removed include_empty_files.dpatch - included upstream.
    - Removed ntpd_type_pun_fix.dpatch - included upstream.
    - Removed rrdtool_uninitialized_fix.dpatch - included upstream.
    - Added libcollectdclient_static_sstrerror.dpatch to make a private
      function in libcollectdclient static.
  * debian/rules:
    - Install collectd-network.py to /usr/share/doc/collectd/examples/.

 -- Sebastian Harl <tokkee@debian.org>  Tue, 02 Jun 2009 22:03:10 +0200

collectd (4.6.2-3) unstable; urgency=low

  * debian/patches:
    - Actually enabled rrdtool_uninitialized_fix.dpatch - d'oh!

 -- Sebastian Harl <tokkee@debian.org>  Fri, 29 May 2009 15:49:46 +0200

collectd (4.6.2-2) unstable; urgency=low

  * debian/patches:
    - Added battery_acpi_complain.dpatch - upstream patch to fix excessive
      error messages in the battery plugin in case /proc/acpi/battery is not
      available.
    - Added ntpd_type_pun_fix.dpatch - upstream patch to fix dereferencing of
      a type-punned pointer identified by GCC 4.4, thanks to Martin Michlmayr
      for reporting this (Closes: #526667).
    - Added include_empty_files.dpatch - upstream patch to fix the inclusion
      of empty configuration files, thanks to Alexander Wirt for reporting
      this.
    - Added rrdtool_uninitialized_fix.dpatch - upstream patch to fix an
      uninitialized value warning in the rrdtool plugin, thanks to Andreas
      Moog for reporting this.
  * debian/collectd.conf, debian/filters.conf:
    - Added a sample filter chain configuration.
  * debian/rules:
    - Added contrib/php-collection/ to /usr/share/doc/collectd/.
    - Disabled "netlink" plugin on mips and mipsel - those architectures do
      not allow to link non-PIC code into shared objects, thanks to Peter De
      Schrijver for reporting this (Closes: #524593).
  * debian/control:
    - Build-depend on iptables-dev (>= 1.4.3.2-2) to link against the packaged
      libiptc which is available as shared library since iptables 1.4.3.
      Depend on versions >= 1.4.3.2-2 because of #524766.

 -- Sebastian Harl <tokkee@debian.org>  Fri, 29 May 2009 14:12:36 +0200

collectd (4.6.2-1) unstable; urgency=low

  * New upstream release.
    - Fixed the use of struct in6_addr (Closes: #521748).
    - Added a filter infrastructure based on "matches" and "targets".
    - Added support for vmem graphs to collection.cgi (Closes: #521993).
    New plugins:
    - bind9 name-server and zone statistics: bind
    - Parse statistics from websites: curl
    - Query data from a relational database: dbi
    - OpenVPN traffic and compression statistics: openvpn
    - Query data from an Oracle database: oracle (disabled in Debian,
      libclntsh is not available)
    - Write data via the RRD accelerator daemon: rrdcached (disabled in
      Debian, rrdclient support is not yet available)
    New matches:
    - Match values by their identifier based on regular expressions: regex
    - Match values with an invalid timestamp: timediff
    - Select values by their data sources' values: value
    New targets:
    - Create and dispatch a notification: notification
    - Replace parts of an identifier using regular expressions: replace
    - Set (overwrite) entire parts of an identifier: set
  * Uploading to unstable, since Lenny has been released.
  * New debconf template translations:
    - vi.po, thanks to Clytie Siddall (Closes: #515872).
    - es.po, thanks to Francisco Javier Cuadrado and Erika Chacón Vivas
      (Closes: #520988).
  * debian/patches:
    - Removed perl-uninitialized-var.dpatch - included upstream.
  * debian/control:
    - Added new binary packages libcollectdclient0 and libcollectdclient-dev
      for the newly added client library.
    - Added new binary package collectd-utils for optional utilities that pull
      in additional dependencies. Currently, this only includes
      collectd-nagios. The new package replaces collectd (<< 4.6.1-1~),
      because it overwrites /usr/bin/collectd-nagios.
    - Added libdbi0-dev to the build dependencies - this is required by the
      dbi plugin.
    - Moved collectd-dbg from section "utils" to the newly added "debug".
    - Updated Standards-Version to 3.8.1.
  * debian/rules:
    - Use dh_install and *.install files to specify which package some file
      belongs to.
  * debian/libcollectdclient0.symbols:
    - Added symbols file for libcollectdclient.
  * debian/collectd.overrides:
    - Override "spelling-error-in-description" for the apache plugin name -
      all plugins are spelled lowercase.
  * debian/collectd.init.d:
    - Start the daemon using start-stop-daemon's --oknodo option to exit
      successfully if the daemon is already running as requested by section
      9.3.2 of the Debian Policy 3.8.1.
  * debian/copyright:
    - Reference GPL-2 in addition to GPL (latest version), since GPL2-only is
      used by some files.

 -- Sebastian Harl <sh@tokkee.org>  Thu, 02 Apr 2009 16:38:57 +0200

collectd (4.5.1-1) experimental; urgency=low

  * New upstream release.
    New plugins:
    - Count the number of files in directories: filecount
    - Send desktop notifications to a notification daemon: notify_desktop
    - Send notification E-mails: notify_email
    - One-wire sensors information: onewire (experimental, disabled in Debian)
    - PostgreSQL database statistics: postgresql
    - Linux ACPI thermal zone information: thermal (Closes: #492580)
  * Uploading to experimental because of the Lenny freeze.
  * debian/control:
    - Added build dependency on libglib2.0-dev and libnotify-dev required by
      the notify_desktop plugin.
    - Added build dependency on libesmtp-dev required by the notify_email
      plugin.
    - Added build dependency on libpq-dev required by the postgresql plugin.
    - Let collectd-dbg and collectd-dev depend on ${misc:Depends} - this is
      required when using debhelper.
  * debian/rules:
    - Disabled onewire plugin - owfs is not yet available in Debian.
    - Install contrib/snmp-probe-host.px to /usr/share/doc/collectd/examples/.
    - Set CONFIGFILE to /etc/collectd/collectd.conf.
  * debian/patches:
    - Added perl-uninitialized-var.dpatch - upstream patch to fix an
      uninitialized variable warning causing a FTBFS because of -Werror.
    - Removed myplugin_strcpy.dpatch - applied upstream.
    - Removed perl_deadlock.dpatch - included upstream.
    - Removed memory_libstatgrab.dpatch - included upstream.
    - Removed collectd_memleak.dpatch - included upstream.
    - Removed snmp_memleak.dpatch - included upstream.
    - Removed memcached_fdleak.dpatch - included upstream.
    - Removed memcached_timeout.dpatch - included upstream.
    - Removed pod-errors.dpatch - included upstream.
  * debian/collectd.overrides:
    - Override "spelling-error-in-description" for the postgresql plugin name
      - all plugins are spelled lowercase.
  * debian/collectd.init.d:
    - Do not restart collectd if the configuration test fails.

 -- Sebastian Harl <sh@tokkee.org>  Fri, 12 Dec 2008 10:09:48 +0100

collectd (4.4.2-3) unstable; urgency=low

  * New debconf template translation:
    - nl.po, thanks to Eric Spreen (Closes: #502204).
    - sv.po, thanks to Martin Bagge (Closes: #504248).
  * debian/patches:
    - Added pod-errors.dpatch to fix some minor POD errors.
  * debian/rules:
    - Remove generated manpages in the clean target to avoid cluttering the
      source diff with the rebuilt manpages.
  * debian/collectd.conf:
    - Fixed a wrong type used in the "tail" plugin example.

 -- Sebastian Harl <sh@tokkee.org>  Sat, 06 Dec 2008 16:53:25 +0100

collectd (4.4.2-2) unstable; urgency=low

  * Removed the work around for #474087 (broken openipmi .pc files) introduced
    in 4.4.1-1 and instead build depend on libopenipmi-dev (>= 2.0.14-1~)
    which includes fixed .pc files. This fixes an undefined symbol error when
    loading the ipmi plugin caused by that work around (Closes: #494665).
  * debian/collectd.init.d:
    - The "status" command now exits with 1 if collectd is not running.
    - Do not suppress output when checking the configuration with the -t
      command line option. This will also show errors that don't cause
      collectd to abort, e.g. failure to load plugins (Closes: #499232).
  * debian/control:
    - Added librrd-dev as the preferred option to the librrd2-dev build
      dependency - the latter one is a virtual package since rrdtool 1.3.
  * Added debian/patches/perl_deadlock.dpatch - upstream patch to fix a
    possible deadlock in the perl plugin (Closes: #499179).
  * Added debian/patches/memory_libstatgrab.dpatch - trivial upstream patch to
    fix a typo in the libstatgrab code of the memory plugin.
  * Added debian/patches/collectd_memleak.dpatch - trivial upstream patch to
    fix a possible memory leak.
  * Added debian/patches/snmp_memleak.dpatch - trivial upstream patch to fix a
    possible memory leak in the snmp plugin.
  * Added debian/patches/memcached_fdleak.dpatch - trivial upstream patch to
    fix a possible file descriptor leak in the memcached plugin.
  * Added debian/patches/memcached_timeout.dpatch - trivial upstream patch to
    fix the timeout passed to poll(2).

 -- Sebastian Harl <sh@tokkee.org>  Thu, 18 Sep 2008 19:12:54 +0200

collectd (4.4.2-1) unstable; urgency=low

  * New upstream release.
  * Removed librrd0-dev and libmysqlclient14-dev from the build-dependencies -
    those package are no longer available since Etch.
  * Removed byacc from the build-dependencies - collectd now requires bison.
  * Removed libupsclient-config.sh - upstream now supports pkg-config for
    libupsclient.
  * Include collection3 in /usr/share/doc/collectd/examples/:
    - Updated README.Debian to point the collection3's README.
    - Added libconfig-general-perl to the suggested packages.
  * README.Debian: Added a note about how to get collectd2html.pl working with
    version 4 of collectd.
  * Added debian/patches/myplugin_strcpy.dpatch - use sstrncpy() instead of
    strcpy() which is poisoned in collectd.h.
  * collectd.overrides: Removed shlib-with-non-pic-code for nut.so - the
    plugin now links against the shared libupsclient.
  * Do not compress any example files, so they may be used directly.

 -- Sebastian Harl <sh@tokkee.org>  Fri, 25 Jul 2008 19:58:58 +0200

collectd (4.4.1-2) unstable; urgency=low

  * Restrict libcurl4-gnutls-dev build dependency to versions which are not
    affected by #488701 (Closes: #489091).
  * Added linux-libc-dev (<< 2.6.25-1) as an option to the linux-libc-dev
    (>= 2.6.25-4) build dependency - those versions are not affected by
    #479899.
  * Added build dependency on pkg-config - this is used by collectd's
    configure script to check for a couple of libraries.
  * Added libupsclient-config.sh to imitate libupsclient-config which is no
    longer available. libupsclient-config.sh is a simple wrapper around
    pkg-config. This is a workaround until upstream supports pkg-config for
    libupsclient.
  * Replaced nut-dev build dependency with libupsclient1-dev:
    Reenabled the "nut" plugin on all architectures.

 -- Sebastian Harl <sh@tokkee.org>  Mon, 07 Jul 2008 20:45:53 +0000

collectd (4.4.1-1) unstable; urgency=low

  * New upstream release.
    - Fixed another issue of the sensors plugin affecting some chip types
      (Closes: #468143).
    - Fixed creation of "vserver" graphs in collection.cgi (Closes: #475120).
    - Fixed a segfault when using libperl 5.10.
    - collectd now ships libiptc itself.
    New plugins:
    - Ascent server statistics: ascent
    - IPMI sensors information: ipmi
    - PowerDNS name server statistics: powerdns
    - incremental parsing of logfiles: tail
    - TeamSpeak2 server statistics: teamspeak2
    - detailed virtual memory statistics: vmem
  * Disable "tcpconns" plugin by default (Closes: #478759).
  * Reenabled iptables plugin on all architectures (Closes: #473435).
    - Added the plugin to collectd.conf.
    - Added /usr/share/doc/collectd/examples/iptables/.
    - Added build dependency on linux-libc-dev (>= 2.6.25-4) - that version is
      required because of #479899.
  * New debconf template translations:
    - gl.po, thanks to Jacobo Tarrio (Closes: #482667).
  * Added a work around for #474087 (broken openipmi .pc files) by forcing the
    inclusion of the ipmi plugin and manually specifying the dependencies.
  * Updated standards-version to 3.8.0 (no changes).

 -- Sebastian Harl <sh@tokkee.org>  Tue, 17 Jun 2008 10:35:51 +0200

collectd (4.3.2-1) unstable; urgency=low

  * New upstream release.
    - Fixed handling of ignored sensors instances (Closes: #468143).
    - Fixed reading of wireless noise values (Closes: #471788).
  * Adopted patches and script to extractDS.px being renamed to rrd_filter.px.
  * Clarified debconf template in respect to packages required for the data
    migration (Closes: #469336).
  * collectd.conf: Moved logging plugins to the top of the file.
  * New debconf template translations:
    - de.po, thanks to Kai Wasserbäch (Closes: #469334).
    - fr.po, thanks to Florent Usseil (Closes: #468813).
    - pt.po, thanks to Américo Monteiro (Closes: #469745, #472183).
  * collectd.init.d: Consider the DISABLE option only when starting collectd.
  * Disabled iptables plugin - libiptc is no longer available in Debian.
    - Removed the plugin from collectd.conf.
    - Removed /usr/share/doc/collectd/examples/iptables/.

 -- Sebastian Harl <sh@tokkee.org>  Mon, 31 Mar 2008 12:13:18 +0200

collectd (4.3.0-2) unstable; urgency=low

  * Added "lm-sensors" to the recommended packages and README.Debian.plugins
    (this is required by the sensors plugin).
  * Restrict the libvirt-dev build dependency and the libvirt plugin to amd64,
    i386 and powerpc (libvirt is only available on those architectures).
  * Restrict the libvirt-dev build dependency to versions >= 0.4.0-6 to make
    sure Xen is supported and to fix some strange FTBFS complaining about a
    missing symbol "virDomainBlockStats".

 -- Sebastian Harl <sh@tokkee.org>  Thu, 06 Mar 2008 23:37:44 +0100

collectd (4.3.0-1) unstable; urgency=low

  * New upstream release.
    - Added basic support for monitoring by introducing notifications and
      threshold checking.
    - Reverse lookups can be disabled using the "ReverseLookups" option of the
      ntpd plugin (Closes: #455162).
    New plugins:
    - Set the hostname to an unique identifier: uuid
    - CPU, dist, network statistics of guest systems: libvirt
  * Upload to unstable: With the latest changes to the perl plugin, all parts
    of collectd are suitable for a release.
  * Added libvirt-dev, libxml2-dev and libhal-dev to the build dependencies.
  * Updated package description to mention the monitoring support.
  * Install liboping/oping.h to collectd-dev as well.
  * collectd.init.d: Optionally start collectdmon to monitor collectd. This
    can be configured using the USE_COLLECTDMON variable - enabled by default.
  * collectd.init.d: Added ENABLE_COREFILES option - if enabled the core file
    limit will be set to unlimited - disabled by default.
  * Compile collectd with -DLT_LAZY_OR_NOW='RTLD_LAZY|RTLD_GLOBAL' to force
    lt_dlopen() to use the RTLD_GLOBAL flag which is required by the perl
    plugin (which would otherwise be unable to find symbols defined in libperl
    when loading perl modules that require such symbols).
  * Disable debugging support.
  * watch file: Added uversionmangle for "beta" and "-rc".
  * Override "spelling-error-in-description" for the mysql plugin name - all
    plugins are spelled lowercase.

 -- Sebastian Harl <sh@tokkee.org>  Tue, 19 Feb 2008 21:44:42 +0100

collectd (4.2.4-1) experimental; urgency=low

  * New upstream release.
  * Added versioned build-dependency on dpkg-dev (>= 1.14.10); collectd FTBFS
    with earlier versions because of #452262.
  * Added libregexp-common-perl (required by Collectd::Unixsock) to the
    suggested packages.
  * Added support for the "status" command to the init script.
  * Updated standards-version to 3.7.3 (no changes).
  * Added --without-libstatgrab to the configure options to prevent collectd
    from being linked against this library if it's available.
  * Disabled xmms plugin - xmms will be removed from unstable
    (Closes: #459707).

 -- Sebastian Harl <sh@tokkee.org>  Sun, 27 Jan 2008 18:34:23 +0100

collectd (4.2.1-1) experimental; urgency=low

  * New upstream release.
  * Changed XS-Vcs-* to Vcs-*.
  * Marked advanced rrdtool configuration options as such in collectd.conf.
  * Added exec-munin.px, exec-munin.conf, exec-smartctl and snmp-data.conf to
    /usr/share/doc/collectd/examples/.
  * Moved "Homepage" field from package description to the source stanza.

 -- Sebastian Harl <sh@tokkee.org>  Wed, 21 Nov 2007 09:50:46 +0000

collectd (4.2.0-1) experimental; urgency=low

  * New upstream release.
    - Added options to collectd2html.pl to specify host and data directory
      (Closes: #438499).
    - Link against a thread-safe version of librrd.
    New plugins:
    - IPVS connection statistics: ipvs
    - Statistic of the memcached distributed caching system: memcached
    - Detailed Linux network interface and routing statistics: netlink (32bit
      systems only)
    - Nginx (a HTTP and E-Mail server/proxy) statistics: nginx
    - Values from SNMP enabled network devices: snmp
    - Number of TCP connections to specific ports: tcpconns
    - Bitrate and frequency of music played with XMMS: xmms
  * Updated init script to wait for collectd to shut down (Closes: #422208).
  * Merged all plugin packages into the collectd binary package.
  * Added README.Debian.plugins and gen_plugin_deps.pl to document the plugin
    dependencies.
  * Added collectd.overrides to override shlib-with-non-pic-code errors of
    plugins liked against static libraries which have not been linked with
    -fPIC.
  * Removed debian/examples/myplugin.c and debian/examples/MyPlugin.pm - they
    are included in the upstream sources now.
  * Added libcurl4-gnutls-dev as option to the libcurl3-gnutls-dev build
    dependency.

 -- Sebastian Harl <sh@tokkee.org>  Sun, 28 Oct 2007 13:38:21 +0100

collectd (4.0.7-1) experimental; urgency=low

  * New upstream release.
  * Disable iptables and nut plugins on hppa as well to work around a FTBFS
    caused by #358637 and presumably #419684 (Closes: #430933).
  * Changed collectd-dbg's section to "utils".
  * Added httpd-cgi to suggested packages.
  * Added documentation of the provided examples to README.Debian, thanks to
    Eduard Bloch for his proposal (Closes: #434182).

 -- Sebastian Harl <sh@tokkee.org>  Fri, 31 Aug 2007 10:04:41 +0200

collectd (4.0.3-1) experimental; urgency=low

  * New upstream release.

 -- Sebastian Harl <sh@tokkee.org>  Tue, 19 Jun 2007 21:41:21 +0100

collectd (4.0.2-1) experimental; urgency=low

  * New upstream release (Closes: #428114).
    - Added large file support (Closes: #422212).
    - Rewrite of the plugin system to allow more flexibility by using
      different types of plugins.
    - Added Nagios plugin to query collectd from Nagios.
    New plugins:
    - Output to "comma separated values" (CSV) files: csv
    - Output to RRD files: rrdtool
    - IO via the network: network
    - External runtime interface: unixsock
    - Embedding a Perl interpreter: perl
    - Logging to files, STDOUT or STDERR: logfile
    - Logging to syslog: syslog
    - Amount of available entropy: entropy
    - Execution of external programs: exec
    - Iptables statistics: iptables (32bit systems only)
    - IRQ counters: irq
    - UPS information: nut (32bit systems only)
  * New binary package collectd-perl (linking against libperl).
    - Added collectd-perl to suggested packages.
  * examples/myplugin.c: Converted to the new plugin interface.
  * Enabled debugging.
  * Added possibility to automatically migrate RRD files to collectd-4 using
    migrate-3-4.px and extractDS.px provided by upstream.
    - Added extractDS_path.dpatch to set an absolute path in migrate-3-4.px.
    - Using po-debconf to make translations of debconf templates possible.
  * Added NEWS.Debian with notes regarding the upgrade to collectd-4.
  * Updated init script to only start a single collectd process.
  * Added examples/MyPlugin.pm.
  * Added XS-Vcs-{Git,Browser} tags.
  * Added check_plugins.pl to check the build result of all plugins.
  * Do not build apple_sensors and tape plugins as they do not provide any
    functionality any longer.

 -- Sebastian Harl <sh@tokkee.org>  Wed, 13 Jun 2007 18:58:34 +0100

collectd (3.11.2-1) experimental; urgency=low

  * New upstream release.
  * Removed sensors-ignorelist.dpatch - has been merged upstream.
  * Removed email-ignore-size-le-0.dpatch - has been merged upstream.
  * Added watch file.
  * examples/myplugin.c: Pass "-" instead of NULL to plugin_submit().

 -- Sebastian Harl <sh@tokkee.org>  Thu, 15 Feb 2007 09:19:15 +0000

collectd (3.11.0-1) experimental; urgency=low

  * New upstream release.
    New plugins:
    - DNS traffic (query types, response codes, opcodes and traffic): dns
    - E-Mail statistics (count, traffic, spam scores and checks): email
    - Motherboard monitor: mbmon
    - Multimeter statistics: multimeter (beta version)
  * Upload to experimental because of Etch freeze.
  * New binary package collectd-dns (linking against libpcap).
    - Added collectd-dns to suggested packages.
  * Do not split off packages introducing new recommendations or suggestions.
    - Merge collectd-hddtemp into collectd.
    - Add hddtemp and mbmon to suggested packages.
  * Added sensors-ignorelist.dpatch: Avoid assertion in ignorelist_match ()
    when sensors plugin is not configured.
  * Added email-ignore-size-le-0.dpatch: Ignore the size of an email if it is
    less than or equal to zero.

 -- Sebastian Harl <sh@tokkee.org>  Sun, 24 Dec 2006 14:09:39 +0000

collectd (3.10.4-1) unstable; urgency=low

  * New upstream release.
    - Fix an infinite loop in server mode if binding to a socket fails and
      close the socket descriptor (Closes: #404018).
  * examples/myplugin.c: Include system headers before collectd headers to
    make it compile without any autoconf defines set (Closes: #401075).

 -- Sebastian Harl <sh@tokkee.org>  Fri, 22 Dec 2006 00:33:30 +0000

collectd (3.10.3-1) unstable; urgency=low

  * New upstream release.
  * Made package binNMUable:
    - Upstream assures API backward compatibility only between patch releases.
  * LSBized init script.

 -- Sebastian Harl <sh@tokkee.org>  Mon,  6 Nov 2006 13:09:28 +0000

collectd (3.10.2-1) unstable; urgency=low

  * New upstream release.
    - Retry connecting to remote host and database in ping and mysql plugins
      respectively (Closes: #393742).
  * Replaced libcurl3-dev build dependency with libcurl3-gnutls-dev to prevent
    linking against libssl.

 -- Sebastian Harl <sh@tokkee.org>  Fri,  3 Nov 2006 15:18:17 +0000

collectd (3.10.1-4) unstable; urgency=low

  * Changed collectd-dbg's section and priority to "devel" and "extra"
    respectively.
  * Set init start sequence code to 95 to be sure to start after any daemons
    that data is collected from.

 -- Sebastian Harl <sh@tokkee.org>  Thu,  5 Oct 2006 10:25:07 +0000

collectd (3.10.1-3) unstable; urgency=low

  * Added --oknodo to start-stop-daemon in the init script (Closes: #379703).

 -- Sebastian Harl <sh@tokkee.org>  Tue, 25 Jul 2006 18:34:55 +0200

collectd (3.10.1-2) unstable; urgency=low

  * Added collectd-dbg package.

 -- Sebastian Harl <sh@tokkee.org>  Sun, 23 Jul 2006 23:39:42 +0200

collectd (3.10.1-1) unstable; urgency=low

  * New upstream release.
  * Dynamically link against external liboping.
    - New binary package collectd-ping.
    - Added collectd-ping to suggested packages.
  * Moved config file from /usr/share/doc/collectd/examples/ to
    /etc/collectd/.

 -- Sebastian Harl <sh@tokkee.org>  Sat, 22 Jul 2006 21:43:37 +0200

collectd (3.10.0-1) unstable; urgency=low

  * New upstream release.
    New plugins:
    - APC UPS's charge, load, input/output/battery voltage, etc.: apcups
    - NTP daemon's local clock drift, offset to peers, etc.: ntpd
  * Upstream no longer provides a debian/ directory. Thus no repackaging is
    required any longer.
  * Not using getifaddrs() is now the default in upstream. getifaddrs.dpatch
    no longer needed.
  * Added collectd-hddtemp as a suggestion to the collectd package.

 -- Sebastian Harl <sh@tokkee.org>  Sun,  9 Jul 2006 21:52:13 +0200

collectd (3.9.4+debian-1) unstable; urgency=low

  * Initial release (Closes: #373008).
  * Removed upstream's debian/ directory from .orig.tar.gz.
  * getifaddrs.dpatch: Patching src/traffic.c to read data from /proc instead
    of using getifaddrs(). getifaddrs() does not seem to work correctly on 
    AMD64.

 -- Sebastian Harl <sh@tokkee.org>  Fri,  7 Jul 2006 15:49:42 +0200