Makefile

   1 # The default target of this Makefile is...
   2 all:
   3
   4 # Define MOZILLA_SHA1 environment variable when running make to make use of
   5 # a bundled SHA1 routine coming from Mozilla. It is GPL'd and should be fast
   6 # on non-x86 architectures (e.g. PowerPC), while the OpenSSL version (default
   7 # choice) has very fast version optimized for i586.
   8 #
   9 # Define NO_OPENSSL environment variable if you do not have OpenSSL.
  10 # This also implies MOZILLA_SHA1.
  11 #
  12 # Define NO_CURL if you do not have curl installed.  git-http-pull and
  13 # git-http-push are not built, and you cannot use http:// and https://
  14 # transports.
  15 #
  16 # Define CURLDIR=/foo/bar if your curl header and library files are in
  17 # /foo/bar/include and /foo/bar/lib directories.
  18 #
  19 # Define NO_EXPAT if you do not have expat installed.  git-http-push is
  20 # not built, and you cannot push using http:// and https:// transports.
  21 #
  22 # Define NO_D_INO_IN_DIRENT if you don't have d_ino in your struct dirent.
  23 #
  24 # Define NO_D_TYPE_IN_DIRENT if your platform defines DT_UNKNOWN but lacks
  25 # d_type in struct dirent (latest Cygwin -- will be fixed soonish).
  26 #
  27 # Define NO_STRCASESTR if you don't have strcasestr.
  28 #
  29 # Define NO_STRLCPY if you don't have strlcpy.
  30 #
  31 # Define NO_SETENV if you don't have setenv in the C library.
  32 #
  33 # Define NO_SYMLINK_HEAD if you never want .git/HEAD to be a symbolic link.
  34 # Enable it on Windows.  By default, symrefs are still used.
  35 #
  36 # Define NO_SVN_TESTS if you want to skip time-consuming SVN interoperability
  37 # tests.  These tests take up a significant amount of the total test time
  38 # but are not needed unless you plan to talk to SVN repos.
  39 #
  40 # Define NO_FINK if you are building on Darwin/Mac OS X, have Fink
  41 # installed in /sw, but don't want GIT to link against any libraries
  42 # installed there.  If defined you may specify your own (or Fink's)
  43 # include directories and library directories by defining CFLAGS
  44 # and LDFLAGS appropriately.
  45 #
  46 # Define NO_DARWIN_PORTS if you are building on Darwin/Mac OS X,
  47 # have DarwinPorts installed in /opt/local, but don't want GIT to
  48 # link against any libraries installed there.  If defined you may
  49 # specify your own (or DarwinPort's) include directories and
  50 # library directories by defining CFLAGS and LDFLAGS appropriately.
  51 #
  52 # Define PPC_SHA1 environment variable when running make to make use of
  53 # a bundled SHA1 routine optimized for PowerPC.
  54 #
  55 # Define ARM_SHA1 environment variable when running make to make use of
  56 # a bundled SHA1 routine optimized for ARM.
  57 #
  58 # Define NEEDS_SSL_WITH_CRYPTO if you need -lcrypto with -lssl (Darwin).
  59 #
  60 # Define NEEDS_LIBICONV if linking with libc is not enough (Darwin).
  61 #
  62 # Define NEEDS_SOCKET if linking with libc is not enough (SunOS,
  63 # Patrick Mauritz).
  64 #
  65 # Define NO_MMAP if you want to avoid mmap.
  66 #
  67 # Define WITH_OWN_SUBPROCESS_PY if you want to use with python 2.3.
  68 #
  69 # Define NO_IPV6 if you lack IPv6 support and getaddrinfo().
  70 #
  71 # Define NO_SOCKADDR_STORAGE if your platform does not have struct
  72 # sockaddr_storage.
  73 #
  74 # Define NO_ICONV if your libc does not properly support iconv.
  75 #
  76 # Define NO_ACCURATE_DIFF if your diff program at least sometimes misses
  77 # a missing newline at the end of the file.
  78 #
  79 # Define NO_PYTHON if you want to lose all benefits of the recursive merge.
  80 #
  81 # Define COLLISION_CHECK below if you believe that SHA1's
  82 # 1461501637330902918203684832716283019655932542976 hashes do not give you
  83 # sufficient guarantee that no collisions between objects will ever happen.
  84
  85 # Define USE_NSEC below if you want git to care about sub-second file mtimes
  86 # and ctimes. Note that you need recent glibc (at least 2.2.4) for this, and
  87 # it will BREAK YOUR LOCAL DIFFS! show-diff and anything using it will likely
  88 # randomly break unless your underlying filesystem supports those sub-second
  89 # times (my ext3 doesn't).
  90
  91 # Define USE_STDEV below if you want git to care about the underlying device
  92 # change being considered an inode change from the update-cache perspective.
  93
  94 GIT-VERSION-FILE: .FORCE-GIT-VERSION-FILE
  95         @$(SHELL_PATH) ./GIT-VERSION-GEN
  96 -include GIT-VERSION-FILE
  97
  98 uname_S := $(shell sh -c 'uname -s 2>/dev/null || echo not')
  99 uname_M := $(shell sh -c 'uname -m 2>/dev/null || echo not')
 100 uname_O := $(shell sh -c 'uname -o 2>/dev/null || echo not')
 101 uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not')
 102 uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not')
 103
 104 # CFLAGS and LDFLAGS are for the users to override from the command line.
 105
 106 CFLAGS = -g -O2 -Wall
 107 LDFLAGS =
 108 ALL_CFLAGS = $(CFLAGS)
 109 ALL_LDFLAGS = $(LDFLAGS)
 110 STRIP ?= strip
 111
 112 prefix = $(HOME)
 113 bindir = $(prefix)/bin
 114 gitexecdir = $(bindir)
 115 template_dir = $(prefix)/share/git-core/templates/
 116 GIT_PYTHON_DIR = $(prefix)/share/git-core/python
 117 # DESTDIR=
 118
 119 # default configuration for gitweb
 120 GITWEB_SITENAME =
 121 GITWEB_PROJECTROOT = /pub/git
 122 GITWEB_LIST =
 123 GITWEB_HOMETEXT = indextext.html
 124 GITWEB_CSS = gitweb.css
 125
 126 export prefix bindir gitexecdir template_dir GIT_PYTHON_DIR
 127
 128 CC = gcc
 129 AR = ar
 130 TAR = tar
 131 INSTALL = install
 132 RPMBUILD = rpmbuild
 133
 134 # sparse is architecture-neutral, which means that we need to tell it
 135 # explicitly what architecture to check for. Fix this up for yours..
 136 SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
 137
 138
 139
 140 ### --- END CONFIGURATION SECTION ---
 141
 142 SCRIPT_SH = \
 143         git-bisect.sh git-branch.sh git-checkout.sh \
 144         git-cherry.sh git-clean.sh git-clone.sh git-commit.sh \
 145         git-fetch.sh \
 146         git-ls-remote.sh \
 147         git-merge-one-file.sh git-parse-remote.sh \
 148         git-pull.sh git-rebase.sh \
 149         git-repack.sh git-request-pull.sh git-reset.sh \
 150         git-resolve.sh git-revert.sh git-sh-setup.sh \
 151         git-tag.sh git-verify-tag.sh \
 152         git-applymbox.sh git-applypatch.sh git-am.sh \
 153         git-merge.sh git-merge-stupid.sh git-merge-octopus.sh \
 154         git-merge-resolve.sh git-merge-ours.sh \
 155         git-lost-found.sh git-quiltimport.sh
 156
 157 SCRIPT_PERL = \
 158         git-archimport.perl git-cvsimport.perl git-relink.perl \
 159         git-shortlog.perl git-rerere.perl \
 160         git-annotate.perl git-cvsserver.perl \
 161         git-svnimport.perl git-cvsexportcommit.perl \
 162         git-send-email.perl git-svn.perl
 163
 164 SCRIPT_PYTHON = \
 165         git-merge-recursive.py
 166
 167 SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH)) \
 168           $(patsubst %.perl,%,$(SCRIPT_PERL)) \
 169           $(patsubst %.py,%,$(SCRIPT_PYTHON)) \
 170           git-cherry-pick git-status git-instaweb
 171
 172 # The ones that do not have to link with lcrypto, lz nor xdiff.
 173 SIMPLE_PROGRAMS = \
 174         git-daemon$X
 175
 176 # ... and all the rest that could be moved out of bindir to gitexecdir
 177 PROGRAMS = \
 178         git-checkout-index$X \
 179         git-convert-objects$X git-fetch-pack$X git-fsck-objects$X \
 180         git-hash-object$X git-index-pack$X git-local-fetch$X \
 181         git-merge-base$X \
 182         git-merge-index$X git-mktag$X git-mktree$X git-pack-objects$X git-patch-id$X \
 183         git-peek-remote$X git-prune-packed$X git-receive-pack$X \
 184         git-send-pack$X git-shell$X \
 185         git-show-index$X git-ssh-fetch$X \
 186         git-ssh-upload$X git-unpack-file$X \
 187         git-unpack-objects$X git-update-server-info$X \
 188         git-upload-pack$X git-verify-pack$X \
 189         git-symbolic-ref$X \
 190         git-name-rev$X git-pack-redundant$X git-repo-config$X git-var$X \
 191         git-describe$X git-merge-tree$X git-blame$X git-imap-send$X
 192
 193 BUILT_INS = git-log$X git-whatchanged$X git-show$X git-update-ref$X \
 194         git-count-objects$X git-diff$X git-push$X git-mailsplit$X \
 195         git-grep$X git-add$X git-rm$X git-rev-list$X git-stripspace$X \
 196         git-check-ref-format$X git-rev-parse$X git-mailinfo$X \
 197         git-init-db$X git-tar-tree$X git-upload-tar$X git-format-patch$X \
 198         git-ls-files$X git-ls-tree$X git-get-tar-commit-id$X \
 199         git-read-tree$X git-commit-tree$X git-write-tree$X \
 200         git-apply$X git-show-branch$X git-diff-files$X git-update-index$X \
 201         git-diff-index$X git-diff-stages$X git-diff-tree$X git-cat-file$X \
 202         git-fmt-merge-msg$X git-prune$X git-mv$X
 203
 204 # what 'all' will build and 'install' will install, in gitexecdir
 205 ALL_PROGRAMS = $(PROGRAMS) $(SIMPLE_PROGRAMS) $(SCRIPTS)
 206
 207 # Backward compatibility -- to be removed after 1.0
 208 PROGRAMS += git-ssh-pull$X git-ssh-push$X
 209
 210 # Set paths to tools early so that they can be used for version tests.
 211 ifndef SHELL_PATH
 212         SHELL_PATH = /bin/sh
 213 endif
 214 ifndef PERL_PATH
 215         PERL_PATH = /usr/bin/perl
 216 endif
 217 ifndef PYTHON_PATH
 218         PYTHON_PATH = /usr/bin/python
 219 endif
 220
 221 PYMODULES = \
 222         gitMergeCommon.py
 223
 224 LIB_FILE=libgit.a
 225 XDIFF_LIB=xdiff/lib.a
 226
 227 LIB_H = \
 228         blob.h cache.h commit.h csum-file.h delta.h \
 229         diff.h object.h pack.h pkt-line.h quote.h refs.h \
 230         run-command.h strbuf.h tag.h tree.h git-compat-util.h revision.h \
 231         tree-walk.h log-tree.h dir.h path-list.h
 232
 233 DIFF_OBJS = \
 234         diff.o diff-lib.o diffcore-break.o diffcore-order.o \
 235         diffcore-pickaxe.o diffcore-rename.o tree-diff.o combine-diff.o \
 236         diffcore-delta.o log-tree.o
 237
 238 LIB_OBJS = \
 239         blob.o commit.o connect.o csum-file.o cache-tree.o base85.o \
 240         date.o diff-delta.o entry.o exec_cmd.o ident.o lockfile.o \
 241         object.o pack-check.o patch-delta.o path.o pkt-line.o \
 242         quote.o read-cache.o refs.o run-command.o dir.o object-refs.o \
 243         server-info.o setup.o sha1_file.o sha1_name.o strbuf.o \
 244         tag.o tree.o usage.o config.o environment.o ctype.o copy.o \
 245         fetch-clone.o revision.o pager.o tree-walk.o xdiff-interface.o \
 246         alloc.o merge-file.o path-list.o $(DIFF_OBJS)
 247
 248 BUILTIN_OBJS = \
 249         builtin-log.o builtin-help.o builtin-count.o builtin-diff.o builtin-push.o \
 250         builtin-grep.o builtin-add.o builtin-rev-list.o builtin-check-ref-format.o \
 251         builtin-rm.o builtin-init-db.o builtin-rev-parse.o \
 252         builtin-tar-tree.o builtin-upload-tar.o builtin-update-index.o \
 253         builtin-ls-files.o builtin-ls-tree.o builtin-write-tree.o \
 254         builtin-read-tree.o builtin-commit-tree.o builtin-mailinfo.o \
 255         builtin-apply.o builtin-show-branch.o builtin-diff-files.o \
 256         builtin-diff-index.o builtin-diff-stages.o builtin-diff-tree.o \
 257         builtin-cat-file.o builtin-mailsplit.o builtin-stripspace.o \
 258         builtin-update-ref.o builtin-fmt-merge-msg.o builtin-prune.o \
 259         builtin-mv.o
 260
 261 GITLIBS = $(LIB_FILE) $(XDIFF_LIB)
 262 LIBS = $(GITLIBS) -lz
 263
 264 #
 265 # Platform specific tweaks
 266 #
 267
 268 # We choose to avoid "if .. else if .. else .. endif endif"
 269 # because maintaining the nesting to match is a pain.  If
 270 # we had "elif" things would have been much nicer...
 271
 272 ifeq ($(uname_S),Linux)
 273         NO_STRLCPY = YesPlease
 274 endif
 275 ifeq ($(uname_S),GNU/kFreeBSD)
 276         NO_STRLCPY = YesPlease
 277 endif
 278 ifeq ($(uname_S),Darwin)
 279         NEEDS_SSL_WITH_CRYPTO = YesPlease
 280         NEEDS_LIBICONV = YesPlease
 281         NO_STRLCPY = YesPlease
 282         ifndef NO_FINK
 283                 ifeq ($(shell test -d /sw/lib && echo y),y)
 284                         ALL_CFLAGS += -I/sw/include
 285                         ALL_LDFLAGS += -L/sw/lib
 286                 endif
 287         endif
 288         ifndef NO_DARWIN_PORTS
 289                 ifeq ($(shell test -d /opt/local/lib && echo y),y)
 290                         ALL_CFLAGS += -I/opt/local/include
 291                         ALL_LDFLAGS += -L/opt/local/lib
 292                 endif
 293         endif
 294 endif
 295 ifeq ($(uname_S),SunOS)
 296         NEEDS_SOCKET = YesPlease
 297         NEEDS_NSL = YesPlease
 298         SHELL_PATH = /bin/bash
 299         NO_STRCASESTR = YesPlease
 300         NO_STRLCPY = YesPlease
 301         ifeq ($(uname_R),5.8)
 302                 NEEDS_LIBICONV = YesPlease
 303                 NO_UNSETENV = YesPlease
 304                 NO_SETENV = YesPlease
 305         endif
 306         ifeq ($(uname_R),5.9)
 307                 NO_UNSETENV = YesPlease
 308                 NO_SETENV = YesPlease
 309         endif
 310         INSTALL = ginstall
 311         TAR = gtar
 312         ALL_CFLAGS += -D__EXTENSIONS__
 313 endif
 314 ifeq ($(uname_O),Cygwin)
 315         NO_D_TYPE_IN_DIRENT = YesPlease
 316         NO_D_INO_IN_DIRENT = YesPlease
 317         NO_STRCASESTR = YesPlease
 318         NO_STRLCPY = YesPlease
 319         NO_SYMLINK_HEAD = YesPlease
 320         NEEDS_LIBICONV = YesPlease
 321         # There are conflicting reports about this.
 322         # On some boxes NO_MMAP is needed, and not so elsewhere.
 323         # Try uncommenting this if you see things break -- YMMV.
 324         # NO_MMAP = YesPlease
 325         NO_IPV6 = YesPlease
 326         X = .exe
 327 endif
 328 ifeq ($(uname_S),FreeBSD)
 329         NEEDS_LIBICONV = YesPlease
 330         ALL_CFLAGS += -I/usr/local/include
 331         ALL_LDFLAGS += -L/usr/local/lib
 332 endif
 333 ifeq ($(uname_S),OpenBSD)
 334         NO_STRCASESTR = YesPlease
 335         NEEDS_LIBICONV = YesPlease
 336         ALL_CFLAGS += -I/usr/local/include
 337         ALL_LDFLAGS += -L/usr/local/lib
 338 endif
 339 ifeq ($(uname_S),NetBSD)
 340         ifeq ($(shell expr "$(uname_R)" : '[01]\.'),2)
 341                 NEEDS_LIBICONV = YesPlease
 342         endif
 343         ALL_CFLAGS += -I/usr/pkg/include
 344         ALL_LDFLAGS += -L/usr/pkg/lib -Wl,-rpath,/usr/pkg/lib
 345 endif
 346 ifeq ($(uname_S),AIX)
 347         NO_STRCASESTR=YesPlease
 348         NO_STRLCPY = YesPlease
 349         NEEDS_LIBICONV=YesPlease
 350 endif
 351 ifeq ($(uname_S),IRIX64)
 352         NO_IPV6=YesPlease
 353         NO_SETENV=YesPlease
 354         NO_STRCASESTR=YesPlease
 355         NO_STRLCPY = YesPlease
 356         NO_SOCKADDR_STORAGE=YesPlease
 357         SHELL_PATH=/usr/gnu/bin/bash
 358         ALL_CFLAGS += -DPATH_MAX=1024
 359         # for now, build 32-bit version
 360         ALL_LDFLAGS += -L/usr/lib32
 361 endif
 362 ifneq (,$(findstring arm,$(uname_M)))
 363         ARM_SHA1 = YesPlease
 364 endif
 365
 366 -include config.mak.autogen
 367 -include config.mak
 368
 369 ifdef WITH_OWN_SUBPROCESS_PY
 370         PYMODULES += compat/subprocess.py
 371 else
 372         ifeq ($(NO_PYTHON),)
 373                 ifneq ($(shell $(PYTHON_PATH) -c 'import subprocess;print"OK"' 2>/dev/null),OK)
 374                         PYMODULES += compat/subprocess.py
 375                 endif
 376         endif
 377 endif
 378
 379 ifndef NO_CURL
 380         ifdef CURLDIR
 381                 # This is still problematic -- gcc does not always want -R.
 382                 ALL_CFLAGS += -I$(CURLDIR)/include
 383                 CURL_LIBCURL = -L$(CURLDIR)/lib -R$(CURLDIR)/lib -lcurl
 384         else
 385                 CURL_LIBCURL = -lcurl
 386         endif
 387         PROGRAMS += git-http-fetch$X
 388         curl_check := $(shell (echo 070908; curl-config --vernum) | sort -r | sed -ne 2p)
 389         ifeq "$(curl_check)" "070908"
 390                 ifndef NO_EXPAT
 391                         PROGRAMS += git-http-push$X
 392                 endif
 393         endif
 394         ifndef NO_EXPAT
 395                 EXPAT_LIBEXPAT = -lexpat
 396         endif
 397 endif
 398
 399 ifndef NO_OPENSSL
 400         OPENSSL_LIBSSL = -lssl
 401         ifdef OPENSSLDIR
 402                 # Again this may be problematic -- gcc does not always want -R.
 403                 ALL_CFLAGS += -I$(OPENSSLDIR)/include
 404                 OPENSSL_LINK = -L$(OPENSSLDIR)/lib -R$(OPENSSLDIR)/lib
 405         else
 406                 OPENSSL_LINK =
 407         endif
 408 else
 409         ALL_CFLAGS += -DNO_OPENSSL
 410         MOZILLA_SHA1 = 1
 411         OPENSSL_LIBSSL =
 412 endif
 413 ifdef NEEDS_SSL_WITH_CRYPTO
 414         LIB_4_CRYPTO = $(OPENSSL_LINK) -lcrypto -lssl
 415 else
 416         LIB_4_CRYPTO = $(OPENSSL_LINK) -lcrypto
 417 endif
 418 ifdef NEEDS_LIBICONV
 419         ifdef ICONVDIR
 420                 # Again this may be problematic -- gcc does not always want -R.
 421                 ALL_CFLAGS += -I$(ICONVDIR)/include
 422                 ICONV_LINK = -L$(ICONVDIR)/lib -R$(ICONVDIR)/lib
 423         else
 424                 ICONV_LINK =
 425         endif
 426         LIBS += $(ICONV_LINK) -liconv
 427 endif
 428 ifdef NEEDS_SOCKET
 429         LIBS += -lsocket
 430         SIMPLE_LIB += -lsocket
 431 endif
 432 ifdef NEEDS_NSL
 433         LIBS += -lnsl
 434         SIMPLE_LIB += -lnsl
 435 endif
 436 ifdef NO_D_TYPE_IN_DIRENT
 437         ALL_CFLAGS += -DNO_D_TYPE_IN_DIRENT
 438 endif
 439 ifdef NO_D_INO_IN_DIRENT
 440         ALL_CFLAGS += -DNO_D_INO_IN_DIRENT
 441 endif
 442 ifdef NO_SYMLINK_HEAD
 443         ALL_CFLAGS += -DNO_SYMLINK_HEAD
 444 endif
 445 ifdef NO_STRCASESTR
 446         COMPAT_CFLAGS += -DNO_STRCASESTR
 447         COMPAT_OBJS += compat/strcasestr.o
 448 endif
 449 ifdef NO_STRLCPY
 450         COMPAT_CFLAGS += -DNO_STRLCPY
 451         COMPAT_OBJS += compat/strlcpy.o
 452 endif
 453 ifdef NO_SETENV
 454         COMPAT_CFLAGS += -DNO_SETENV
 455         COMPAT_OBJS += compat/setenv.o
 456 endif
 457 ifdef NO_SETENV
 458         COMPAT_CFLAGS += -DNO_UNSETENV
 459         COMPAT_OBJS += compat/unsetenv.o
 460 endif
 461 ifdef NO_MMAP
 462         COMPAT_CFLAGS += -DNO_MMAP
 463         COMPAT_OBJS += compat/mmap.o
 464 endif
 465 ifdef NO_IPV6
 466         ALL_CFLAGS += -DNO_IPV6
 467 endif
 468 ifdef NO_SOCKADDR_STORAGE
 469 ifdef NO_IPV6
 470         ALL_CFLAGS += -Dsockaddr_storage=sockaddr_in
 471 else
 472         ALL_CFLAGS += -Dsockaddr_storage=sockaddr_in6
 473 endif
 474 endif
 475 ifdef NO_INET_NTOP
 476         LIB_OBJS += compat/inet_ntop.o
 477 endif
 478
 479 ifdef NO_ICONV
 480         ALL_CFLAGS += -DNO_ICONV
 481 endif
 482
 483 ifdef PPC_SHA1
 484         SHA1_HEADER = "ppc/sha1.h"
 485         LIB_OBJS += ppc/sha1.o ppc/sha1ppc.o
 486 else
 487 ifdef ARM_SHA1
 488         SHA1_HEADER = "arm/sha1.h"
 489         LIB_OBJS += arm/sha1.o arm/sha1_arm.o
 490 else
 491 ifdef MOZILLA_SHA1
 492         SHA1_HEADER = "mozilla-sha1/sha1.h"
 493         LIB_OBJS += mozilla-sha1/sha1.o
 494 else
 495         SHA1_HEADER = <openssl/sha.h>
 496         LIBS += $(LIB_4_CRYPTO)
 497 endif
 498 endif
 499 endif
 500 ifdef NO_ACCURATE_DIFF
 501         ALL_CFLAGS += -DNO_ACCURATE_DIFF
 502 endif
 503
 504 # Shell quote (do not use $(call) to accommodate ancient setups);
 505
 506 SHA1_HEADER_SQ = $(subst ','\'',$(SHA1_HEADER))
 507
 508 DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
 509 bindir_SQ = $(subst ','\'',$(bindir))
 510 gitexecdir_SQ = $(subst ','\'',$(gitexecdir))
 511 template_dir_SQ = $(subst ','\'',$(template_dir))
 512 prefix_SQ = $(subst ','\'',$(prefix))
 513
 514 SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
 515 PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH))
 516 PYTHON_PATH_SQ = $(subst ','\'',$(PYTHON_PATH))
 517 GIT_PYTHON_DIR_SQ = $(subst ','\'',$(GIT_PYTHON_DIR))
 518
 519 ALL_CFLAGS += -DSHA1_HEADER='$(SHA1_HEADER_SQ)' $(COMPAT_CFLAGS)
 520 LIB_OBJS += $(COMPAT_OBJS)
 521 export prefix TAR INSTALL DESTDIR SHELL_PATH template_dir
 522 ### Build rules
 523
 524 all: $(ALL_PROGRAMS) $(BUILT_INS) git$X gitk gitweb/gitweb.cgi
 525
 526 all:
 527         $(MAKE) -C templates
 528
 529 strip: $(PROGRAMS) git$X
 530         $(STRIP) $(STRIP_OPTS) $(PROGRAMS) git$X
 531
 532 git$X: git.c common-cmds.h $(BUILTIN_OBJS) $(GITLIBS) GIT-CFLAGS
 533         $(CC) -DGIT_VERSION='"$(GIT_VERSION)"' \
 534                 $(ALL_CFLAGS) -o $@ $(filter %.c,$^) \
 535                 $(BUILTIN_OBJS) $(ALL_LDFLAGS) $(LIBS)
 536
 537 builtin-help.o: common-cmds.h
 538
 539 $(BUILT_INS): git$X
 540         rm -f $@ && ln git$X $@
 541
 542 common-cmds.h: Documentation/git-*.txt
 543         ./generate-cmdlist.sh > $@+
 544         mv $@+ $@
 545
 546 $(patsubst %.sh,%,$(SCRIPT_SH)) : % : %.sh
 547         rm -f $@ $@+
 548         sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
 549             -e 's|@@PERL@@|$(PERL_PATH_SQ)|g' \
 550             -e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \
 551             -e 's/@@NO_CURL@@/$(NO_CURL)/g' \
 552             -e 's/@@NO_PYTHON@@/$(NO_PYTHON)/g' \
 553             $@.sh >$@+
 554         chmod +x $@+
 555         mv $@+ $@
 556
 557 $(patsubst %.perl,%,$(SCRIPT_PERL)) : % : %.perl
 558         rm -f $@ $@+
 559         sed -e '1s|#!.*perl|#!$(PERL_PATH_SQ)|' \
 560             -e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \
 561             $@.perl >$@+
 562         chmod +x $@+
 563         mv $@+ $@
 564
 565 $(patsubst %.py,%,$(SCRIPT_PYTHON)) : % : %.py GIT-CFLAGS
 566         rm -f $@ $@+
 567         sed -e '1s|#!.*python|#!$(PYTHON_PATH_SQ)|' \
 568             -e 's|@@GIT_PYTHON_PATH@@|$(GIT_PYTHON_DIR_SQ)|g' \
 569             -e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \
 570             $@.py >$@+
 571         chmod +x $@+
 572         mv $@+ $@
 573
 574 git-cherry-pick: git-revert
 575         cp $< $@+
 576         mv $@+ $@
 577
 578 git-status: git-commit
 579         cp $< $@+
 580         mv $@+ $@
 581
 582 gitweb/gitweb.cgi: gitweb/gitweb.perl
 583         rm -f $@ $@+
 584         sed -e '1s|#!.*perl|#!$(PERL_PATH_SQ)|' \
 585             -e 's|@@GIT_VERSION@@|$(GIT_VERSION)|g' \
 586             -e 's|@@GIT_BINDIR@@|$(bindir)|g' \
 587             -e 's|@@GITWEB_SITENAME@@|$(GITWEB_SITENAME)|g' \
 588             -e 's|@@GITWEB_PROJECTROOT@@|$(GITWEB_PROJECTROOT)|g' \
 589             -e 's|@@GITWEB_LIST@@|$(GITWEB_LIST)|g' \
 590             -e 's|@@GITWEB_HOMETEXT@@|$(GITWEB_HOMETEXT)|g' \
 591             -e 's|@@GITWEB_CSS@@|$(GITWEB_CSS)|g' \
 592             $< >$@+
 593         chmod +x $@+
 594         mv $@+ $@
 595
 596 git-instaweb: git-instaweb.sh gitweb/gitweb.cgi gitweb/gitweb.css
 597         rm -f $@ $@+
 598         sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
 599             -e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \
 600             -e 's/@@NO_CURL@@/$(NO_CURL)/g' \
 601             -e 's/@@NO_PYTHON@@/$(NO_PYTHON)/g' \
 602             -e '/@@GITWEB_CGI@@/r gitweb/gitweb.cgi' \
 603             -e '/@@GITWEB_CGI@@/d' \
 604             -e '/@@GITWEB_CSS@@/r gitweb/gitweb.css' \
 605             -e '/@@GITWEB_CSS@@/d' \
 606             $@.sh > $@+
 607         chmod +x $@+
 608         mv $@+ $@
 609
 610 # These can record GIT_VERSION
 611 git$X git.spec \
 612         $(patsubst %.sh,%,$(SCRIPT_SH)) \
 613         $(patsubst %.perl,%,$(SCRIPT_PERL)) \
 614         $(patsubst %.py,%,$(SCRIPT_PYTHON)) \
 615         : GIT-VERSION-FILE
 616
 617 %.o: %.c GIT-CFLAGS
 618         $(CC) -o $*.o -c $(ALL_CFLAGS) $<
 619 %.o: %.S
 620         $(CC) -o $*.o -c $(ALL_CFLAGS) $<
 621
 622 exec_cmd.o: exec_cmd.c GIT-CFLAGS
 623         $(CC) -o $*.o -c $(ALL_CFLAGS) '-DGIT_EXEC_PATH="$(gitexecdir_SQ)"' $<
 624 builtin-init-db.o: builtin-init-db.c GIT-CFLAGS
 625         $(CC) -o $*.o -c $(ALL_CFLAGS) -DDEFAULT_GIT_TEMPLATE_DIR='"$(template_dir_SQ)"' $<
 626
 627 http.o: http.c GIT-CFLAGS
 628         $(CC) -o $*.o -c $(ALL_CFLAGS) -DGIT_USER_AGENT='"git/$(GIT_VERSION)"' $<
 629
 630 ifdef NO_EXPAT
 631 http-fetch.o: http-fetch.c http.h GIT-CFLAGS
 632         $(CC) -o $*.o -c $(ALL_CFLAGS) -DNO_EXPAT $<
 633 endif
 634
 635 git-%$X: %.o $(GITLIBS)
 636         $(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
 637
 638 $(SIMPLE_PROGRAMS) : $(LIB_FILE)
 639 $(SIMPLE_PROGRAMS) : git-%$X : %.o
 640         $(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
 641                 $(LIB_FILE) $(SIMPLE_LIB)
 642
 643 ssh-pull.o: ssh-fetch.c
 644 ssh-push.o: ssh-upload.c
 645 git-local-fetch$X: fetch.o
 646 git-ssh-fetch$X: rsh.o fetch.o
 647 git-ssh-upload$X: rsh.o
 648 git-ssh-pull$X: rsh.o fetch.o
 649 git-ssh-push$X: rsh.o
 650
 651 git-imap-send$X: imap-send.o $(LIB_FILE)
 652
 653 http.o http-fetch.o http-push.o: http.h
 654 git-http-fetch$X: fetch.o http.o http-fetch.o $(GITLIBS)
 655         $(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
 656                 $(LIBS) $(CURL_LIBCURL) $(EXPAT_LIBEXPAT)
 657
 658 git-http-push$X: revision.o http.o http-push.o $(GITLIBS)
 659         $(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
 660                 $(LIBS) $(CURL_LIBCURL) $(EXPAT_LIBEXPAT)
 661
 662 $(LIB_OBJS) $(BUILTIN_OBJS): $(LIB_H)
 663 $(patsubst git-%$X,%.o,$(PROGRAMS)): $(LIB_H) $(wildcard */*.h)
 664 $(DIFF_OBJS): diffcore.h
 665
 666 $(LIB_FILE): $(LIB_OBJS)
 667         rm -f $@ && $(AR) rcs $@ $(LIB_OBJS)
 668
 669 XDIFF_OBJS=xdiff/xdiffi.o xdiff/xprepare.o xdiff/xutils.o xdiff/xemit.o
 670
 671 $(XDIFF_LIB): $(XDIFF_OBJS)
 672         rm -f $@ && $(AR) rcs $@ $(XDIFF_OBJS)
 673
 674
 675 doc:
 676         $(MAKE) -C Documentation all
 677
 678 TAGS:
 679         rm -f TAGS
 680         find . -name '*.[hcS]' -print | xargs etags -a
 681
 682 tags:
 683         rm -f tags
 684         find . -name '*.[hcS]' -print | xargs ctags -a
 685
 686 ### Detect prefix changes
 687 TRACK_CFLAGS = $(subst ','\'',$(ALL_CFLAGS)):$(GIT_PYTHON_DIR_SQ):\
 688              $(bindir_SQ):$(gitexecdir_SQ):$(template_dir_SQ):$(prefix_SQ)
 689
 690 GIT-CFLAGS: .FORCE-GIT-CFLAGS
 691         @FLAGS='$(TRACK_CFLAGS)'; \
 692             if test x"$$FLAGS" != x"`cat GIT-CFLAGS 2>/dev/null`" ; then \
 693                 echo 1>&2 "    * new build flags or prefix"; \
 694                 echo "$$FLAGS" >GIT-CFLAGS; \
 695             fi
 696
 697 ### Testing rules
 698
 699 # GNU make supports exporting all variables by "export" without parameters.
 700 # However, the environment gets quite big, and some programs have problems
 701 # with that.
 702
 703 export NO_PYTHON
 704 export NO_SVN_TESTS
 705
 706 test: all
 707         $(MAKE) -C t/ all
 708
 709 test-date$X: test-date.c date.o ctype.o
 710         $(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) test-date.c date.o ctype.o
 711
 712 test-delta$X: test-delta.c diff-delta.o patch-delta.o
 713         $(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $^
 714
 715 test-dump-cache-tree$X: dump-cache-tree.o $(GITLIBS)
 716         $(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
 717
 718 test-sha1$X: test-sha1.o $(GITLIBS)
 719         $(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
 720
 721 check-sha1:: test-sha1$X
 722         ./test-sha1.sh
 723
 724 check:
 725         for i in *.c; do sparse $(ALL_CFLAGS) $(SPARSE_FLAGS) $$i || exit; done
 726
 727
 728
 729 ### Installation rules
 730
 731 install: all
 732         $(INSTALL) -d -m755 '$(DESTDIR_SQ)$(bindir_SQ)'
 733         $(INSTALL) -d -m755 '$(DESTDIR_SQ)$(gitexecdir_SQ)'
 734         $(INSTALL) $(ALL_PROGRAMS) '$(DESTDIR_SQ)$(gitexecdir_SQ)'
 735         $(INSTALL) git$X gitk '$(DESTDIR_SQ)$(bindir_SQ)'
 736         $(MAKE) -C templates install
 737         $(INSTALL) -d -m755 '$(DESTDIR_SQ)$(GIT_PYTHON_DIR_SQ)'
 738         $(INSTALL) $(PYMODULES) '$(DESTDIR_SQ)$(GIT_PYTHON_DIR_SQ)'
 739         if test 'z$(bindir_SQ)' != 'z$(gitexecdir_SQ)'; \
 740         then \
 741                 ln -f '$(DESTDIR_SQ)$(bindir_SQ)/git$X' \
 742                         '$(DESTDIR_SQ)$(gitexecdir_SQ)/git$X' || \
 743                 cp '$(DESTDIR_SQ)$(bindir_SQ)/git$X' \
 744                         '$(DESTDIR_SQ)$(gitexecdir_SQ)/git$X'; \
 745         fi
 746         $(foreach p,$(BUILT_INS), rm -f '$(DESTDIR_SQ)$(gitexecdir_SQ)/$p' && ln '$(DESTDIR_SQ)$(gitexecdir_SQ)/git$X' '$(DESTDIR_SQ)$(gitexecdir_SQ)/$p' ;)
 747
 748 install-doc:
 749         $(MAKE) -C Documentation install
 750
 751
 752
 753
 754 ### Maintainer's dist rules
 755
 756 git.spec: git.spec.in
 757         sed -e 's/@@VERSION@@/$(GIT_VERSION)/g' < $< > $@+
 758         mv $@+ $@
 759
 760 GIT_TARNAME=git-$(GIT_VERSION)
 761 dist: git.spec git-tar-tree
 762         ./git-tar-tree HEAD^{tree} $(GIT_TARNAME) > $(GIT_TARNAME).tar
 763         @mkdir -p $(GIT_TARNAME)
 764         @cp git.spec $(GIT_TARNAME)
 765         @echo $(GIT_VERSION) > $(GIT_TARNAME)/version
 766         $(TAR) rf $(GIT_TARNAME).tar \
 767                 $(GIT_TARNAME)/git.spec $(GIT_TARNAME)/version
 768         @rm -rf $(GIT_TARNAME)
 769         gzip -f -9 $(GIT_TARNAME).tar
 770
 771 rpm: dist
 772         $(RPMBUILD) -ta $(GIT_TARNAME).tar.gz
 773
 774 htmldocs = git-htmldocs-$(GIT_VERSION)
 775 manpages = git-manpages-$(GIT_VERSION)
 776 dist-doc:
 777         rm -fr .doc-tmp-dir
 778         mkdir .doc-tmp-dir
 779         $(MAKE) -C Documentation WEBDOC_DEST=../.doc-tmp-dir install-webdoc
 780         cd .doc-tmp-dir && $(TAR) cf ../$(htmldocs).tar .
 781         gzip -n -9 -f $(htmldocs).tar
 782         :
 783         rm -fr .doc-tmp-dir
 784         mkdir .doc-tmp-dir .doc-tmp-dir/man1 .doc-tmp-dir/man7
 785         $(MAKE) -C Documentation DESTDIR=./ \
 786                 man1dir=../.doc-tmp-dir/man1 \
 787                 man7dir=../.doc-tmp-dir/man7 \
 788                 install
 789         cd .doc-tmp-dir && $(TAR) cf ../$(manpages).tar .
 790         gzip -n -9 -f $(manpages).tar
 791         rm -fr .doc-tmp-dir
 792
 793 ### Cleaning rules
 794
 795 clean:
 796         rm -f *.o mozilla-sha1/*.o arm/*.o ppc/*.o compat/*.o xdiff/*.o \
 797                 $(LIB_FILE) $(XDIFF_LIB)
 798         rm -f $(ALL_PROGRAMS) $(BUILT_INS) git$X
 799         rm -f *.spec *.pyc *.pyo */*.pyc */*.pyo common-cmds.h TAGS tags
 800         rm -rf autom4te.cache
 801         rm -f config.log config.mak.autogen configure config.status config.cache
 802         rm -rf $(GIT_TARNAME) .doc-tmp-dir
 803         rm -f $(GIT_TARNAME).tar.gz git-core_$(GIT_VERSION)-*.tar.gz
 804         rm -f $(htmldocs).tar.gz $(manpages).tar.gz
 805         $(MAKE) -C Documentation/ clean
 806         $(MAKE) -C templates clean
 807         $(MAKE) -C t/ clean
 808         rm -f GIT-VERSION-FILE GIT-CFLAGS
 809
 810 .PHONY: all install clean strip
 811 .PHONY: .FORCE-GIT-VERSION-FILE TAGS tags .FORCE-GIT-CFLAGS
 812
 813 ### Check documentation
 814 #
 815 check-docs::
 816         @for v in $(ALL_PROGRAMS) $(BUILT_INS) git$X gitk; \
 817         do \
 818                 case "$$v" in \
 819                 git-merge-octopus | git-merge-ours | git-merge-recursive | \
 820                 git-merge-resolve | git-merge-stupid | \
 821                 git-ssh-pull | git-ssh-push ) continue ;; \
 822                 esac ; \
 823                 test -f "Documentation/$$v.txt" || \
 824                 echo "no doc: $$v"; \
 825                 grep -q "^gitlink:$$v\[[0-9]\]::" Documentation/git.txt || \
 826                 case "$$v" in \
 827                 git) ;; \
 828                 *) echo "no link: $$v";; \
 829                 esac ; \
 830         done | sort