b81c830c28c22d82beada45286f14676f7bccae8
1 git-submodule(1)
2 ================
4 NAME
5 ----
6 git-submodule - Initialize, update or inspect submodules
9 SYNOPSIS
10 --------
11 [verse]
12 'git submodule' [--quiet] add [-b branch]
13 [--reference <repository>] [--] <repository> <path>
14 'git submodule' [--quiet] status [--cached] [--recursive] [--] [<path>...]
15 'git submodule' [--quiet] init [--] [<path>...]
16 'git submodule' [--quiet] update [--init] [-N|--no-fetch] [--rebase]
17 [--reference <repository>] [--merge] [--recursive] [--] [<path>...]
18 'git submodule' [--quiet] summary [--cached] [--summary-limit <n>] [commit] [--] [<path>...]
19 'git submodule' [--quiet] foreach [--recursive] <command>
20 'git submodule' [--quiet] sync [--] [<path>...]
23 DESCRIPTION
24 -----------
25 Submodules allow foreign repositories to be embedded within
26 a dedicated subdirectory of the source tree, always pointed
27 at a particular commit.
29 They are not to be confused with remotes, which are meant mainly
30 for branches of the same project; submodules are meant for
31 different projects you would like to make part of your source tree,
32 while the history of the two projects still stays completely
33 independent and you cannot modify the contents of the submodule
34 from within the main project.
35 If you want to merge the project histories and want to treat the
36 aggregated whole as a single project from then on, you may want to
37 add a remote for the other project and use the 'subtree' merge strategy,
38 instead of treating the other project as a submodule. Directories
39 that come from both projects can be cloned and checked out as a whole
40 if you choose to go that route.
42 Submodules are composed from a so-called `gitlink` tree entry
43 in the main repository that refers to a particular commit object
44 within the inner repository that is completely separate.
45 A record in the `.gitmodules` file at the root of the source
46 tree assigns a logical name to the submodule and describes
47 the default URL the submodule shall be cloned from.
48 The logical name can be used for overriding this URL within your
49 local repository configuration (see 'submodule init').
51 This command will manage the tree entries and contents of the
52 gitmodules file for you, as well as inspect the status of your
53 submodules and update them.
54 When adding a new submodule to the tree, the 'add' subcommand
55 is to be used. However, when pulling a tree containing submodules,
56 these will not be checked out by default;
57 the 'init' and 'update' subcommands will maintain submodules
58 checked out and at appropriate revision in your working tree.
59 You can briefly inspect the up-to-date status of your submodules
60 using the 'status' subcommand and get a detailed overview of the
61 difference between the index and checkouts using the 'summary'
62 subcommand.
65 COMMANDS
66 --------
67 add::
68 Add the given repository as a submodule at the given path
69 to the changeset to be committed next to the current
70 project: the current project is termed the "superproject".
71 +
72 This requires two arguments: <repository> and <path>.
73 +
74 <repository> is the URL of the new submodule's origin repository.
75 This may be either an absolute URL, or (if it begins with ./
76 or ../), the location relative to the superproject's origin
77 repository.
78 +
79 <path> is the relative location for the cloned submodule to
80 exist in the superproject. If <path> does not exist, then the
81 submodule is created by cloning from the named URL. If <path> does
82 exist and is already a valid git repository, then this is added
83 to the changeset without cloning. This second form is provided
84 to ease creating a new submodule from scratch, and presumes
85 the user will later push the submodule to the given URL.
86 +
87 In either case, the given URL is recorded into .gitmodules for
88 use by subsequent users cloning the superproject. If the URL is
89 given relative to the superproject's repository, the presumption
90 is the superproject and submodule repositories will be kept
91 together in the same relative location, and only the
92 superproject's URL needs to be provided: git-submodule will correctly
93 locate the submodule using the relative URL in .gitmodules.
95 status::
96 Show the status of the submodules. This will print the SHA-1 of the
97 currently checked out commit for each submodule, along with the
98 submodule path and the output of 'git-describe' for the
99 SHA-1. Each SHA-1 will be prefixed with `-` if the submodule is not
100 initialized and `+` if the currently checked out submodule commit
101 does not match the SHA-1 found in the index of the containing
102 repository. This command is the default command for 'git-submodule'.
103 +
104 If '--recursive' is specified, this command will recurse into nested
105 submodules, and show their status as well.
107 init::
108 Initialize the submodules, i.e. register each submodule name
109 and url found in .gitmodules into .git/config.
110 The key used in .git/config is `submodule.$name.url`.
111 This command does not alter existing information in .git/config.
112 You can then customize the submodule clone URLs in .git/config
113 for your local setup and proceed to 'git submodule update';
114 you can also just use 'git submodule update --init' without
115 the explicit 'init' step if you do not intend to customize
116 any submodule locations.
118 update::
119 Update the registered submodules, i.e. clone missing submodules and
120 checkout the commit specified in the index of the containing repository.
121 This will make the submodules HEAD be detached unless '--rebase' or
122 '--merge' is specified or the key `submodule.$name.update` is set to
123 `rebase` or `merge`.
124 +
125 If the submodule is not yet initialized, and you just want to use the
126 setting as stored in .gitmodules, you can automatically initialize the
127 submodule with the --init option.
128 +
129 If '--recursive' is specified, this command will recurse into the
130 registered submodules, and update any nested submodules within.
132 summary::
133 Show commit summary between the given commit (defaults to HEAD) and
134 working tree/index. For a submodule in question, a series of commits
135 in the submodule between the given super project commit and the
136 index or working tree (switched by --cached) are shown.
138 foreach::
139 Evaluates an arbitrary shell command in each checked out submodule.
140 The command has access to the variables $name, $path and $sha1:
141 $name is the name of the relevant submodule section in .gitmodules,
142 $path is the name of the submodule directory relative to the
143 superproject, and $sha1 is the commit as recorded in the superproject.
144 Any submodules defined in the superproject but not checked out are
145 ignored by this command. Unless given --quiet, foreach prints the name
146 of each submodule before evaluating the command.
147 If --recursive is given, submodules are traversed recursively (i.e.
148 the given shell command is evaluated in nested submodules as well).
149 A non-zero return from the command in any submodule causes
150 the processing to terminate. This can be overridden by adding '|| :'
151 to the end of the command.
152 +
153 As an example, +git submodule foreach \'echo $path {backtick}git
154 rev-parse HEAD{backtick}'+ will show the path and currently checked out
155 commit for each submodule.
157 sync::
158 Synchronizes submodules' remote URL configuration setting
159 to the value specified in .gitmodules. This is useful when
160 submodule URLs change upstream and you need to update your local
161 repositories accordingly.
162 +
163 "git submodule sync" synchronizes all submodules while
164 "git submodule sync -- A" synchronizes submodule "A" only.
166 OPTIONS
167 -------
168 -q::
169 --quiet::
170 Only print error messages.
172 -b::
173 --branch::
174 Branch of repository to add as submodule.
176 --cached::
177 This option is only valid for status and summary commands. These
178 commands typically use the commit found in the submodule HEAD, but
179 with this option, the commit stored in the index is used instead.
181 -n::
182 --summary-limit::
183 This option is only valid for the summary command.
184 Limit the summary size (number of commits shown in total).
185 Giving 0 will disable the summary; a negative number means unlimited
186 (the default). This limit only applies to modified submodules. The
187 size is always limited to 1 for added/deleted/typechanged submodules.
189 -N::
190 --no-fetch::
191 This option is only valid for the update command.
192 Don't fetch new objects from the remote site.
194 --merge::
195 This option is only valid for the update command.
196 Merge the commit recorded in the superproject into the current branch
197 of the submodule. If this option is given, the submodule's HEAD will
198 not be detached. If a merge failure prevents this process, you will
199 have to resolve the resulting conflicts within the submodule with the
200 usual conflict resolution tools.
201 If the key `submodule.$name.update` is set to `merge`, this option is
202 implicit.
204 --rebase::
205 This option is only valid for the update command.
206 Rebase the current branch onto the commit recorded in the
207 superproject. If this option is given, the submodule's HEAD will not
208 be detached. If a a merge failure prevents this process, you will have
209 to resolve these failures with linkgit:git-rebase[1].
210 If the key `submodule.$name.update` is set to `rebase`, this option is
211 implicit.
213 --reference <repository>::
214 This option is only valid for add and update commands. These
215 commands sometimes need to clone a remote repository. In this case,
216 this option will be passed to the linkgit:git-clone[1] command.
217 +
218 *NOTE*: Do *not* use this option unless you have read the note
219 for linkgit:git-clone[1]'s --reference and --shared options carefully.
221 --recursive::
222 This option is only valid for foreach, update and status commands.
223 Traverse submodules recursively. The operation is performed not
224 only in the submodules of the current repo, but also
225 in any nested submodules inside those submodules (and so on).
227 <path>...::
228 Paths to submodule(s). When specified this will restrict the command
229 to only operate on the submodules found at the specified paths.
230 (This argument is required with add).
232 FILES
233 -----
234 When initializing submodules, a .gitmodules file in the top-level directory
235 of the containing repository is used to find the url of each submodule.
236 This file should be formatted in the same way as `$GIT_DIR/config`. The key
237 to each submodule url is "submodule.$name.url". See linkgit:gitmodules[5]
238 for details.
241 AUTHOR
242 ------
243 Written by Lars Hjemli <hjemli@gmail.com>
245 GIT
246 ---
247 Part of the linkgit:git[1] suite